Festool Zigzag Chair - Manuals

rails, and bandsaw away the waste from their front faces. Use a random-orbit sander with progressively finer sanding disks to smooth and fair the curves. The hidden parts, the seat rails and the seat frame components, are made from an 8' board of ¾" x 2½" second-ary hardwood. Since the angle...

iLL ustra tion : ric K christopherson 40 w o o d c r a f t m a g a z i n e | 0 5 . 0 7 70 p r o  e c t n u m  e r cut list A Foot (2) 1 3 / 8 " x 1 9 / 16 " x 17¾" B Leg (2) 1 3 / 8 " x 1 9 / 16 " x 26 5 / 8 " C Seat side rail (2) 1 3 / 8 " x 1 9 / 16 " x 17¾" D...

3 5 4 7 6 8 before you apply your final finish. First, the 22.5° miters are glued up (Fig. 5) using a Domino in mortise B to ensure precise alignment of the joint. When the epoxy has set, the squeeze-out is cleaned up, and mortises J and K are milled; the locking tenons, shop-made from the same hard...