Festool PI567856 - Manuals

Festool PI567856 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 3 - Technical data

3 cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle p...

Page 4 - When processing different surfaces it is

4 1.1 1.2 Push the switch (1.1) forwards to start the ma-chine. A slight pressure on the rear of the switch is enough to switch the machine off. When cold the machine may take a few minutes to reach maximum speed. This is due to its con-struction and is not serious. Electronics ELECTRONIC When proce...

Page 5 - Always disconnect the machine at; Warranty

5 dust extraction. Order numbers can be found in the corresponding brochures. The Stickfi x abrasives are simply pressed onto the Stickfi x sanding pad and pulled off after use. If the front tip of the abrasive has become worn it can be removed from the sanding pad, rotated around 120° and replaced. S...

Festool Manuals