Falcon CLAS90EICY-BR - Manuals

Falcon CLAS90EICY-BR Oven – User Manual in PDF format online.

Manuals:

User Manual

User Manual Falcon CLAS90EICY-BR

Summary

Page 2 - Contents

1. Before You Start... 1 Installation and Maintenance 1 Peculiar smells 1 Ventilation 1 Personal Safety 1 Hob Care 3 Cooker Care 3 Cleaning 3 2. Cooker Overview 4 The Hob 4 The Grill / Glide-out Grill 7 The Ovens 7 The Clock 8 Accessories 12 Main Oven Light 12 3. Cooking Tips 13 Using your Induction...

Page 3 - ‘Ventilation’; Ventilation; : The functions of this hob comply

1 1. Before You Start... This User Guide covers a 3 different models. Although some of the illustrations will look different to your particular model the functions will be the same. We hope the meaning is clear. Your cooker should give you many years of trouble-free cooking if installed and operated...

Page 5 - oven steam out the back; Hob Care; ‘Cleaning your

3 ArtNo.090-0007 90 Ceramic: oven steam out the back Hob Care n n DO NOT use the hob surface as a cutting board. Do not leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans containing oil). n n DO NOT place plastic or aluminium foil, or plast...

Page 6 - The Hob; The kind of pan you use and the

4 ArtNo.312-0004 Correct pans ceramic 2. Cooker Overview The 90 induction cooker (Fig.2-1) has the following features: A. 5 induction cooking zonesB. A control panel C. A separate grill D. Main programmable fan ovenE. Tall fan oven The Hob Use only pans that are suitable for induction hobs. We recom...

Page 7 - 10 Induction hob display; nn; Always take care before touching the surface, even; Residual Heat Indicator,; Cooking Zone

5 ArtNo.313-0003 110 Induction hob display 8 8 8 8 8 Make sure that the base of the pan is clean and dry to prevent any residue burning onto the hob panel. This also helps prevent scratches and deposits.Always use pans that are the same size as (or slightly larger than) the areas marked on the hob. ...

Page 8 - This can only be activated when all the; Boil Dry Function; Please remember not to leave the hob unattended.

6 ArtNo.051-0001 - Induction power levels Power Level Automatic heat-up time at 100% (min:sec) 123456789 0:482:243:485:126:482:002:483:360:10 Table 2-2 ArtNo.210-0010 - Classic induction child lock Fig.2-6 heat up at 100% power for a specified time before the power is reduced to the level selected.W...

Page 9 - Classic grill control; The Ovens; References to ‘left-hand’ and ‘right-hand’ ovens apply as viewed; Operating the Ovens; Classic oven 1

7 ArtNo.331-0002 Grill pan high/low position Fig.2-10 ArtNo.330-0003 - Grill pan w handle pulled forwards ArtNo.210-0001 - Classic grill control Fig.2-7 Fig.2-9 The Grill / Glide-out Grill Open the door and pull the grill pan (Fig.2-7) or carriage (Fig.2-8) forward using the handle. The grill has tw...

Page 10 - The Clock; The clock must be set to the time of day before the oven; ‘cook period’; You cannot set a start time directly – this is set; ‘cook time’; and; ‘stop time’

8 The Clock You can use the clock to turn the left-hand oven on and off. The clock must be set to the time of day before the oven will work.Note: When using the timer functions, first set the clock as required before setting the oven temperature and selecting the oven function (multi-function ovens ...

Page 11 - Make sure that the clock is in manual mode and cancel

9 Turn the Timer knob to the (  ) position. The display will show the current time of day plus the ‘cook time’ you just set. Use the Adjusting knob to set the ‘stop time’ required (Fig.2-19) . The ‘stop time’ is displayed, followed by ‘AUTO’. Set the oven to the cooking temperature you need. Turn t...

Page 12 - A B C D E F

10 The 6-button Clock (Classic & Toledo models) Setting the time of dayThe 6-button LCD clock is shown in Fig.2-25 . When the clock is first connected the display flashes ( 0.00 ) and (  ) alternately.Press and hold both the [  ] and [  ] buttons down (Fig.2-26) . Now press the [+] button (or...

Page 14 - ‘Troubleshooting’

12 Accessories Oven Shelves – Left-hand (Main) Oven In addition to the flat shelves (Fig.2-40) , some models are supplied with a drop shelf (Fig.2-41) . The drop shelf increases the possibilities for oven shelf spacing.The oven shelves can be easily removed and refitted.Pull the shelf forward until ...

Page 15 - DO NOT place warm food in the oven to be timed.; General Oven Tips; Baking trays with food cooking on them should be placed level; When the oven is on, do not leave the door open for; ‘Cleaning Your Cooker’

13 Using your Induction Cooker If you have not used an induction cooker before please be aware of the following:• Ensure that the pans you have or buy are suitable for use on the Induction hob. Stainless steel, enamelled steel or cast iron is ideal. Double check before you buy pans – they must have ...

Page 17 - Cleaning Your Cooker; biological powders, bleach, chlorine based bleach; Hob; Daily Care; ‘Cleaning burned-on spills’; Use an oven glove to protect your hand from; Cleaning Burned-on Spills; ‘Daily Care’

15 5. Cleaning Your Cooker Isolate the electricity supply before carrying out any major cleaning. Allow the cooker to cool. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix different cleaning pr...

Page 18 - Grills; Before you remove any of the grill parts for cleaning,; Cleaning the Glide-out Grill; DO NOT put the side runners in a dishwasher.; Control Panel and Doors; ‘Moving the Cooker’

16 ArtNo.331-0001Grill pan pulled forwards Fig.5-2 ArtNo.331-0003 Grill frame out, no pan ArtNo.331-0004 Removing the grill frame Fig.5-3 Fig.5-4 ArtNo.331-0005 Removing the grill rail Fig.5-5 Grills The grill pan and grid should be washed in hot soapy water. After grilling meats or any foods that s...

Page 19 - Glass Door Panels; DO NOT use harsh abrasive cleaners or sharp metal; The Tall Oven

17 Glass Door Panels (some models) The oven door front panels can be taken off so that the glass panels can be cleaned. Move the cooker forward to gain access to the sides (see the ‘Moving the Cooker’ section under ‘Installation’ ). Open the oven door slightly and remove the front panel fixing screw...

Page 20 - Cleaning Table; Cleaners listed are available from supermarkets or electrical

18 Cleaning Table Cleaners listed are available from supermarkets or electrical retailers as stated. For enamelled surfaces use a cleaner that is approved for use on vitreous enamel.Regular cleaning is recommended. For easier cleaning, wipe up any spillages immediately. Hotplate Part Finish Recommen...

Page 23 - The oven door is misaligned

21 Locate the bulb cover and unscrew it by turning it anti- clockwise - it may be very stiff (Fig.6-2) . Taking care to protect your fingers with a glove in case the bulb should shatter, unscrew the old bulb.Screw in the new bulb clockwise and then screw the bulb cover back on. Turn on the electrici...

Page 24 - Service and Spares; * This information is on the appliance data badge; If you have a problem; conditioned or unauthorised controls. Contact your retailer.

INSTALLATION Check the appliance is electrically safe when you have finished. 22 Service and Spares Firstly, please complete the appliance details below and keep them safe for future reference – this information will enable us to accurately identify the particular appliance and help us to help you. ...

Page 25 - Dear Installer; ‘Electrical Connection’; Provision of Ventilation; You will need the following equipment to complete the; Installer’s Name

INSTALLATION Check the appliance is electrically safe when you have finished. 23 Dear Installer Before you start your installation, please complete the details below, so that, if your customer has a problem relating to your installation, they will be able to contact you easily. Safety Requirements T...

Page 26 - Positioning the Cooker; Overhead – Measurement A; DO NOT place the cooker on a base.

INSTALLATION Check the appliance is electrically safe when you have finished. 24 ArtNo.090-0018 - 90 cooker clearances (AUS) B C D E A Fig.7-1 Positioning the Cooker The diagram (Fig.7-1) shows the minimum recommended distance from the cooker to nearby surfaces as given in AS 5601 / AG 601. 1. Overh...

Page 28 - Electrical Connection; Fixed Wiring

INSTALLATION Check the appliance is electrically safe when you have finished. 26 Electrical Connection This appliance must be installed by a qualified electrician to comply with the relevant regulations (AS/NZS 60335.2.6:2002) and also the local electricity supply company requirements. Ensure that t...

Page 29 - Make sure to release the stability chain as you ease the

INSTALLATION Check the appliance is electrically safe when you have finished. 27 ArtNo.132-0002 - 3 phase 240/415Vac 50Hz 3-phase 240/415 V AC 50 Hz Fig.7-10 ArtNo.132-0005 - Fixed wiring connection 2 (AUS) Mains terminal Fixing bracket for conduit connection Conduit Cable clamp A N Fig.7-11 Refit t...

Page 30 - Fitting the Plinth; Toledo model; Fitting the Splashback

INSTALLATION Check the appliance is electrically safe when you have finished. 28 Fitting the Plinth Classic & Professional+ models Loosen the three screws along the front bottom edge of the cooker. Hook the central keyhole over the central screw. Twist and fit each end keyhole over their respect...

Page 31 - The ceramic hob material is much more sensitive; Removing the end caps

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 29 8. Servicing n n Disconnect the cooker from the electricity supply before servicing, particularly before removing any of the following: ...

Page 37 - Circuit Diagram: Fan Oven; Code Description

35 Circuit Diagram: Fan Oven KeyThe connections shown in the circuit diagram are for single-phase. The ratings are for 240 V 50 Hz. ArtNo.080-0064 90 induction (oven) circuit diagram P1 P3 1 P2 2 P1 1 3 P4 4 P095199 1 2 1 P1 P1 P2 P1 P3 1 P2 2 P1 1 3 P4 4 P033458 P033458 b b br w b b v br br br br b...

Page 38 - Connections; Electric; Dimensions; Ratings; Large

36 10. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Cooker back, serial number repeater badge below oven door opening. Connections Electric 230-240 V 50 Hz Dimensions Overall height minimum 905 mm maximum 930 mm Overall width 900 mm Overall depth 602 ...