Faber SP4 - Manuals

Replacing the remote control The new remote control must be set up as follows: Press switch 1 to ON . Press switch 2 to AUTO (see Fig. 6). Press switch 3 to O for more than 3 seconds until both LED’s are on (see Fig. 7).Press the remote control’s enter button or the e f buttons. Now the heater has l...

The front surround will need to be removed in order to change lamps. Warning - The front surround is heavy and easily damaged !. The front surround is fixed with 4 spring loaded pins and issupported at the top by the chassis.To gain access to the lamps please apply the following proce-dure: WARNING ...

To refit the surround back to the chassis: 1. Refit the rotisserie making sure that the rubber grom- mets are carefully pushed back into the slotted holes on theaxial brackets (see Fig 11).2. Place the surround on the chassis bracket and align the pins with the spring slots. Make sure the surround i...

After Sales Service Your appliance is guaranteed for one year from the date ofpurchase. We undertake to repair or exchange free of chargewithin this period, any part with the exception of a lamp foundto be defective due to a manufacturing fault. Your rights under this guarantee are additional to you...