Faber SILENCE - Manuals

L M F I C B A J E D G K H Builders opening (mm) Feeling Silence Whisper Spectra Cadra Misty Nova Nova A Opening width* 960 960 780 780 680 710 B Opening height* 649 649 705 698 798 890 C Opening depth* 385 385 430 430 430 370 Shelf dimensions (combustible) D Min. height shelf from top frame 350 350 ...

UK/IRL 0 1 2 3 4 5 6 0 X X X X X X X X X X X X X X X X X X X X X X X X X X X X 1 30 0 0 0 0 0 0/X* 2 30 30 0 0 0 0 0 3 45 45 30 0 0 0 0 4 45 45 30 0 0 0 0 5 50 50 45 45 30 0 0 6 50 50 45 45 30 0 0 7 60 60 60 50 50 45 8 60 60 60 60 50 9 65 65 60 60 10 65 65 65 11 65 65 12 65 Horizontal extension E ff...

UK/IRL 13 3.2 Flue requirements (continuing) 3.2.1 Terminal position Verify if the required terminal position meets the local installation regulations regarding disturbance, good functioning and ventilation. (Also see: safety requirements). Note: The terminal must be located so that the outlet is no...

Table 6 UK/IRL 15 UK/IRL 14 Dimension Terminal position Balanced flue room sealed (kW input 7.5 kW expressed in net)Natural draught A Direct below an opening, airbrick, 300 mm opening windows, etc. B Above an opening, airbrick, 300 mm opening window ect. C Horizontally to an opening, airbrick, 300 m...

UK/IRL 17 UK/IRL 16 4. INSTRUCTIONS FOR INSTALLATION 4.1 Gas connection 1. Installation pipes should be in accordance with BS 6891. Pipe work from the meter to the appliance must be of adequate size. 2. The complete installation including the meter must be tested for soundness and purged as describe...

UK/IRL 19 UK/IRL 18 4.2 Preparing the appliances Widescreen and Whisper (continuing) 4. Take the box with the log set out of the combustion chamber. 5. Place the right flue restrictor in the combustion chamber. To determine the right flue restrictor, see chapter 3. C C C C C C C C C C fig. 8 fig. 9 ...

UK/IRL 21 4.3 Preparing the appliance Misty (continuing) 4. Take the box with the log set out of the combustion chamber. 5. Place the right flue restrictor in the combustion chamber. To determine the right flue restrictor, see chapter 3. fig. 12 UK/IRL 20 4.3 Preparing the appliance Misty 1. Remove ...

UK/IRL 23 UK/IRL 22 4.4 Preparing the appliances Spectra Nova/Cadra Nova (continuing) 4. Take the box with the log set out of the combustion chamber. 5. Place the right flue restrictor in the combustion chamber. To determine the right flue restrictor, see chapter 3. fig. 15 4.4 Preparing the applian...

UK/IRL 25 UK/IRL 24 4.5 Fitting the firebox (continuing) 8. Spread, the bags of embers (imitation ashes) provide with the appliance over the burner tray. Attention! No embers on the grid end between the logs and the burner tray. 9. Before placing the glass; check the glass sealing rope is in good co...

UK/IRL 27 UK/IRL UK/IRL 5. INSTALLATION OF THE FLUE 5.1 Connections with use of concentric duct material - Build the system starting from the appliance on. - Make a hole of ø 153 mm for the wall or roof mounted terminal. - Make sure you place the pipes in the right direction, the narrow end towards ...

UK/IRL 29 UK/IRL 28 UK/IRL UK/IRL 5.2 Connection onto an existing chimney (continuing) 5. Fixing the chimney sealing plate (D) and place the 150 mm grommet into the hole of the sealing plate. 6. Fix the sealing plate air tight into the builders opening (use the isolation rope from the chimney connec...

UK/IRL 31 UK/IRL 30 UK/IRL UK/IRL 3. Connect the wires to the gas valve (see fig. 22). 4. Check that there are batteries in the transmitter. See "Replacing batteries", see chapter 10.4.4. 5. Set the on/off switch on the receiver to "on". Setting the right transmission code The receiv...

UK/IRL 33 UK/IRL 32 UK/IRL UK/IRL 6.3 Functional balanced flue check 1. Set the appliance on max. input. 2. Verify the flame picture, this means no flames against the window, the flame have to come besides the logs, if not check the log layout. 3. Check if the flames are yellow after 10 minutes of o...

UK/IRL 37 UK/IRL 36 8.1.4 Burner tray assembly 1. Remove the front, glass, log set, grid and burner tray cover. 2. Break the gas supply at the control valve. 3. Unscrew the burner assembly and take them out of the combustion chamber. A. Pilot assembly B. Burner C. Fixation plate D. Injector E. Gas c...

Whisper Feeling Silence Misty Spectra Cadra Nova Nova Description Company Company Company Company Company Company part part part part part part Surround antracite A9271453 A9270053 A9267753 AA9272853 A9274149 A9274249 Glass 04508200 04508300 04508300 04509000 4509500 04509300 Glass below x x x x 045...

Country UK/IRL UK/IRL Category II 2H3+ II 2H3+ Model type C11 0f C31 C11 0f C31 Heat input Hi kW 7.5 7.5 Efficiency class 2 2 NOX class 4 4 Type of gas G20 G30 Inlet pressure mbar 20 30/37 Gas rate 15 °C / 1013 mbar m3/h 800 231 kg/h 540 g Reference burner pressure mbar 13 25 Injector size mm 3x 1.5...

UK/IRL 45 UK/IRL 44 UK/IRL UK/IRL UK/IRL USER GUIDE 8.3 TECHNICAL DATA Roundscreen Misty Country UK/IRL UK/IRL Category II 2H3+ II 2H3+ Model type C11 0f C31 C11 0f C31 Heat input Hi kW 8,5 8,5 Efficiency class 2 2 NOX class 4 4 Type of gas G20 G30 Inlet pressure mbar 20 30 / 37 Gas rate 15 °C / 101...

UK/IRL 49 UK/IRL 48 Knob A The { is the OFF position preventing any gas from passing through the control valve to either the pilot burner or to the main burner. By pressing the knob in it is possible to turn it anticlockwise. The first function is to turn on the gas to the pilot- this occurs just be...

UK/IRL 51 UK/IRL 50 10.4.1 To light 1. Push in and turn the control knob (A) from { anticlockwise to the setting (small flame). You will hear a ignition click. Check that the pilot is lit (if not repeat). 2. Continue to hold in the control knob for a further ten seconds to ensure that the pilot flam...

UK/IRL 55 UK/IRL 54 UK/IRL UK/IRL UK/IRL UK/IRL 12. DISPOSAL OF THE PACKAGING AND THE APPLIANCE The appliance packaging is recyclable. The packaging could include the following materials: - cardboard; - CFC-free foam (soft); - wood; - plastic; - paper. These materials should be disposed responsibly ...