Extron XTP T UWP 302 - Manuals

Page 2 - Instrucciones de seguridad • Español; 注意; 注意; Safety Instructions

Safety Instructions • English WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. ATTENTION: This symbol, , when used on the product, is intended to ...

FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equ...

Page 4 - Conventions Used in this Guide; Notifications; may; Software Commands; CE; File; Specifications Availability

Conventions Used in this Guide Notifications The following notifications are used in this guide: WARNING: A warning indicates a situation that has the potential to result in death or severe injury. CAUTION: A caution indicates a situation that may result in minor injury. ATTENTION: Attention indicat...

Page 5 - Contents; SIS Configuration and Control; Command and Response Tables for SIS; XTP System Configuration Software; Installing the XTP System Configuration; Reference Information; XTP T UWP 302 • Contents

Contents SIS Configuration and Control ..................... 17 Host Device Connection ................................... 17SIS Programming Guide ................................... 17 Host-to-Device and Device-to-Host Communication ........................................... 17 Device-Initiated Me...

Page 7 - XTP T UWP 302 • Introduction; Introduction; About this Guide; on; Extron; Typical Point-to-Point Application Diagram

XTP T UWP 302 • Introduction 1 Introduction This section contains general information about this guide and the Extron XTP T UWP 302 wallplate transmitter. Topics in this section include: • About this Guide • About the XTP T UWP 302 • Key Features About this Guide This guide contains installation, op...

Page 8 - Key Features

XTP T UWP 302 • Introduction 2 Key Features Wall mountable — Mounts in a standard three-gang junction box or the provided mud ring. Inputs — Include one HDMI input and one VGA input. Computer-video to 1920x1200 support, including HDTV 1080p/60 Deep Color and 2K signals — Supports digital signal tran...

Page 9 - XTP T UWP 302 • Installation and Operation; Installation Overview; Risk of personal injury

XTP T UWP 302 • Installation and Operation 3 Installation and Operation This section contains information for mounting, connecting, and wiring the XTP T UWP 302. Topics in this section include: • Installation Overview • Installing the Mud Ring or Junction Box • Rear and Side Panel Connectors • Mount...

Page 10 - Installing the Mud Ring or Junction Box; Cutting an Opening in the Mounting Surface; Mounting; . Smooth the edges of the opening to avoid; Installing the Mud Ring; Fastening the mud ring with backing clips; Installing the Mud Ring with Backing Clips; Loosely fasten the mounting backing clip on the end of each screw.

XTP T UWP 302 • Installation and Operation 4 Installing the Mud Ring or Junction Box Cutting an Opening in the Mounting Surface 1. Using an appropriate template or the mounting enclosure as a guide, mark the area of the wall with a soft pencil that will be cut (for the provided mud ring, see Mountin...

Page 11 - Insert the mounting bracket into the opening in the wall.; Detail A; Detail B; Backing Clip Installation; Fastening the mud ring with screws; Installing the Mud Ring Directly into the Mounting Surface; Hand tighten the screws.

XTP T UWP 302 • Installation and Operation 5 3. Insert the mounting bracket into the opening in the wall. 4. Rotate each backing clip so that the tab is behind the installation surface to hold the bracket snuggly in place when the screw is tightened. Detail A 0.75" #6-32 Screw Backing Clip Backi...

Page 12 - Installing a UL-certified Junction Box; Rear and Side Panel Connectors; b cd; Front; Rear Panel Connectors

XTP T UWP 302 • Installation and Operation 6 Installing a UL-certified Junction Box 1. Insert the junction box into the hole in the wall. 2. Secure it to the stud using two screws or nails, as appropriate. The front edge of the junction box must be flush with the front surface of the wall. 3. Secure...

Page 13 - IR Over XTP port; Side Panel Connector

XTP T UWP 302 • Installation and Operation 7 b RS-232 Over XTP port — To pass bidirectional serial or other control signals between XTP-compatible devices, connect a control device to the 5-pole captive screw connector. The port includes only the 3 poles labeled “RS-232.” IR Over XTP port — To trans...

Page 14 - Mounting the XTP T UWP 302; Installing the XTP T UWP 302 in the Provided Mud Ring; Installing the XTP T UWP 302 in a Junction Box

XTP T UWP 302 • Installation and Operation 8 Mounting the XTP T UWP 302 Backing Clip ExtronXTP T UWP 302 AU DIO I N PW R HD CP HD MI VG A HD MI IN VG A I N Figure 7. Installing the XTP T UWP 302 in the Provided Mud Ring Wall Stud ExtronXTP T UWP 302 AU DIO I N PW R HD CP HD MI VG A HD MI IN VG A I N...

Page 15 - Front Panel Connections; RCA Connector

XTP T UWP 302 • Installation and Operation 9 Front Panel Connections AUDIO IN PWR HDCP HDMI VGA HDMI IN VGA IN a b c Figure 9. Front Panel Connectors a HDMI connectors — Connect a digital video source device to the HDMI connector. It can accept HDMI, DVI, or dual mode DisplayPort video sources. b Au...

Page 16 - Making Connections; HDMI Connection; Installing the LockIt Lacing Bracket; Plug the HDMI cable into the panel connection.

XTP T UWP 302 • Installation and Operation 10 Making Connections HDMI Connection Use an Extron LockIt Lacing Bracket to secure an HDMI cable to each connector as follows: 3 3 1 2 4 5 Figure 11. Installing the LockIt Lacing Bracket 1. Plug the HDMI cable into the panel connection. 2. Loosen the HDMI ...

Page 17 - TP Cable Termination and Recommendations; Use the following pin configurations for twisted pair cables.; Connector; Straight-through Cable; Pin Wire Color; TP Cable Termination; Supported cables; XTP DTP 24 Plug; Package of 10

XTP T UWP 302 • Installation and Operation 11 TP Cable Termination and Recommendations Use the following pin configurations for twisted pair cables. 1 2 3 4 5 6 7 8 RJ-45 Connector Insert Twisted Pair Wires Pins: Pin 1 2345678 Wire color White-green Green White-orange Blue White-blue Orange White-br...

Page 18 - RS-232 and IR Over XTP Communication; Wiring the RS-232 and IR Over XTP Connector; The length of exposed wires is critical.

XTP T UWP 302 • Installation and Operation 12 RS-232 and IR Over XTP Communication The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals, such as projector control signals, and Infrared data (see figure 13 for an example of how to wire the connector). Tx/Rx Pins Rx ...

Page 19 - Power Connection; that uses XTP remote power should be routed outdoors.; Local power; Power Wiring; The XTP T UWP 302 can be connected to a local power supply.; Electric shock hazard.; The two power cord wires must be kept separate

XTP T UWP 302 • Installation and Operation 13 Power Connection Apply power to the transmitter locally with the provided power supply or remotely with a power injector or an XTP matrix switcher. ATTENTION: XTP remote power is intended for indoor use only. No part of the network that uses XTP remote p...

Page 20 - Remote power; Power injector; on page 13) and connect an XTP Power Injector to the XTP; Typical Pont-to-point Application with Remote Power; Direct power from an XTP matrix switcher

XTP T UWP 302 • Installation and Operation 14 Remote power The XTP T UWP 302 can be powered remotely through an XTP Power Injector or through an XTP matrix switcher. ATTENTION: XTP remote power is intended for indoor use only. No part of the network that uses XTP remote power should be routed outdoo...

Page 21 - Operation; Indicators; EDID

XTP T UWP 302 • Installation and Operation 15 Operation After all transmitters, all receivers, and their connected devices are powered up, the system is fully operational. If any problems are encountered, verify that the cables are routed and connected properly. If problems persist, call the Extron ...

Page 22 - Reset Modes; Reset Mode Summary; After a mode 1 reset,

XTP T UWP 302 • Installation and Operation 16 Reset Modes Use the recessed Reset button on the rear panel of the transmitter to return the device to default settings or to restore factory-shipped firmware. To access the Reset button, the XTP T UWP 302 may need to be removed from the mud ring or junc...

Page 23 - XTP T UWP 302 • SIS Configuration and Control; XTP System; on page 22). This section contains basic SIS communication; Host Device Connection; Device-Initiated Message; is the firmware version number.

XTP T UWP 302 • SIS Configuration and Control 17 SIS Configuration and Control The XTP T UWP 302 can be configured and controlled using Extron Simple Instruction Set (SIS) commands or the XTP System Configuration Software (see XTP System Configuration Software on page 22). This section contains basi...

Page 24 - Error Responses; ASCII to Hex Conversion Table; ASCII to Hexadecimal Conversion; Symbol Definitions

XTP T UWP 302 • SIS Configuration and Control 18 Error Responses When the XTP T UWP 302 receives an SIS command and determines that it is valid, it performs the command and sends the corresponding response to the host device. If the command is determined invalid or contains invalid parameters, the s...

Page 25 - Command and Response Tables for SIS Commands; Input Commands

XTP T UWP 302 • SIS Configuration and Control 19 Command and Response Tables for SIS Commands Command ASCII Command (Host to Device) Response (Device to Host) Additional Description Input Commands Input selection Select input X! ! In X!] Select input X! . View the selected input ! In X! ] View the s...

Page 26 - Picture Adjustment Commands

XTP T UWP 302 • SIS Configuration and Control 20 Command ASCII Command (Host to Device) Response (Device to Host) Additional Description Black signal for audio only NOTE: The switcher uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal so audio can be passed without video. Enable ...

Page 27 - EDID Commands; EDID Minder; Advanced Configuration Commands

XTP T UWP 302 • SIS Configuration and Control 21 Command ASCII Command (Host to Device) Response (Device to Host) Additional Description EDID Commands NOTE: For EDID management, use the XTP System Configuration Software (see EDID Minder on page 33). Advanced Configuration Commands HDCP authorized de...

Page 28 - XTP T UWP 302 • XTP System Configuration Software; Installing the XTP System Configuration Software; The program is available for download on the Extron website,; Extron Website Download Page; On the Extron website, click the; Download; From the left sidebar, click the; Click the; Download Now

XTP T UWP 302 • XTP System Configuration Software 22 XTP System Configuration Software This section contains installation and configuration procedures for the XTP System Configuration Software for configuring and controlling the XTP T UWP 302. Topics in this section include: • Installing the XTP Sys...

Page 29 - Using the XTP System Configuration Software; Connections; Config port; From the Connections screen, select the; USB; Connect

XTP T UWP 302 • XTP System Configuration Software 23 Using the XTP System Configuration Software The XTP T UWP 302 can be controlled directly from the side panel config port or remotely from an XTP matrix switcher. Connections When opening the XTP System Configuration Software, the Connections scree...

Page 30 - Top Menu; File menu; File Menu; Disconnect; Tools Menu

XTP T UWP 302 • XTP System Configuration Software 24 Top Menu The top menu bar contains three menus for configuring software settings. File menu The File menu contains options for disconnecting and exiting the program. To access the menu, click the File menu. Figure 20. File Menu Disconnect This opt...

Page 31 - Update Firmware; Downloading Firmware

XTP T UWP 302 • XTP System Configuration Software 25 Update Firmware This option uploads firmware from the host device to the connected device. NOTE: If necessary, download new firmware from the Extron website (see Downloading Firmware on page 37). 1. From the Tools menu, select Update Firmware . A ...

Page 32 - Help menu; Help Menu; About the Software

XTP T UWP 302 • XTP System Configuration Software 26 Help menu The Help menu contains XTP System Configuration Software information, the help file, and a link to the Extron website. Figure 24. Help Menu About the Software This option provides basic information about the XTP System Configuration Soft...

Page 33 - Device Settings; Transmitter Device Settings Screen; AV Controls panel; Input selection

XTP T UWP 302 • XTP System Configuration Software 27 Device Settings The Device Settings screen allows a user to view and edit various device settings for the device directly connected to the host device. Click the Device Settings icon on the Global Navigation bar to open the Device Settings screen....

Page 34 - Input name; analog; Auto Memory; HDCP authorization; HDCP Authorized

XTP T UWP 302 • XTP System Configuration Software 28 Input/Output tab Click the Input/Output tab to open the Input/Output screen. It contains input information and options to apply automatic settings to individual inputs. Figure 27. Input/Output Tab Input name — Displays the input name. Signal type ...

Page 35 - Analog Video tab; Analog Video Tab; Signal Sampling panel; Save presets

XTP T UWP 302 • XTP System Configuration Software 29 Analog Video tab Click the Analog Video tab to open the Analog Video screen. It contains signal sampling, image shifting, and saving and recalling input preset options. Figure 28. Analog Video Tab Signal Sampling panel Signal sampling optimizes th...

Page 36 - Audio tab; Audio; Audio Tab; Input format section; Input format; Audio Format; Auto; Analog audio gain; Gain

XTP T UWP 302 • XTP System Configuration Software 30 Audio tab Click the Audio tab to open the Audio screen. It contains settings for input format and analog audio gain. Figure 29. Audio Tab Input format section Input format — From the Audio Format drop-down list, select the format for input 2. It c...

Page 37 - General tab; General Tab; Executive mode section; Unlock the front panel; Auto-input Switching section; ZXXX; System reset

XTP T UWP 302 • XTP System Configuration Software 31 General tab Click the General tab to open the general screen. It contains settings for executive mode, auto switch mode, and factory reset. Figure 30. General Tab Executive mode section Unlock the front panel — Click the Unlock Front Panel radio b...

Page 38 - Device Information panel

XTP T UWP 302 • XTP System Configuration Software 32 Device Information panel The Device Information panel displays device information and settings. General Information section Model — Displays the device model. Firmware version — Displays the full firmware version. Signal Information section Select...

Page 39 - EDID Minder Screen; Assign EDID; To assign EDID to selected inputs:; Assign; To assign EDID to all inputs:; Assign to All

XTP T UWP 302 • XTP System Configuration Software 33 EDID Minder Use the EDID Minder screen to assign unique EDID to the input or match current output resolutions to the input. Click the EDID Minder icon on the global navigation bar. The EDID Minder screen opens.The EDID Minder screen displays a tab...

Page 40 - Import EDID; EDID Minder Filters; Common timings

XTP T UWP 302 • XTP System Configuration Software 34 Import EDID 1. On the EDID Minder screen, click the Add EDID to Library button. 2. Select the desired EDID file and click Open . The EDID appears in the Available EDID pane. 3. Assign the EDID from the Available EDID pane to import the EDID settin...

Page 41 - XTP T UWP 302 • Reference Information; Updating Firmware with Firmware Loader; Downloading Extron Firmware Loader; Locating Software on the Extron Website; On the Extron; website; On the left sidebar, click the; Software

XTP T UWP 302 • Reference Information 35 Reference Information This section contains mounting information and instructions for updating firmware. Topics in this section include: • Updating Firmware with Firmware Loader • Mounting Template Updating Firmware with Firmware Loader To upload and update f...

Page 42 - Navigating to Firmware Loader; Navigate to Firmware Loader.; link on the right that corresponds with the program.; Installing Firmware Loader

XTP T UWP 302 • Reference Information 36 Figure 34. Navigating to Firmware Loader 3. Navigate to Firmware Loader. 4. Click the Download link on the right that corresponds with the program. 5. Submit any required information to start the download. Note where the file is saved. Installing Firmware Loa...

Page 43 - Downloading Firmware from the Extron Website; Firmware; Navigate to the XTP T UWP 302.; link to the right of the desired device.

XTP T UWP 302 • Reference Information 37 Downloading Firmware Figure 35. Downloading Firmware from the Extron Website 1. On the Extron website , click the Download tab. 2. On the left sidebar, click the Firmware link. 3. Navigate to the XTP T UWP 302. 4. Ensure the available firmware version is a la...

Page 44 - Installing Firmware with Firmware Loader; completed

XTP T UWP 302 • Reference Information 38 Installing Firmware with Firmware Loader Use the Firmware Loader utility to upload firmware to the transmitter when connected directly to the device. 1. Connect the host device to the side panel USB port. 2. Open Firmware Loader and establish a connection bet...

Page 45 - Mounting Template; Template for the 3-gang; TEMPLATE IS; NOT; SURFACE; Mounting Template for 3-gang Mud Rings

XTP T UWP 302 • Reference Information 39 Mounting Template Figure 37 is a example of a mounting template for preparing mounting surfaces. It is not to full size. Template for the 3-gang mounting bracket 6.41" (16.3 cm) 4.50" (11.4 cm) TEMPLATE IS NOT FULL SIZE. Recommended cut-out area for t...

Page 46 - Contact Information; USA; xtron

Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +1.919.850.1001 FAX Extron Europe +800.3987.6673 (Inside Europe Only)+31.33.453.4040 +31.33.453.4050 FAX Extron Asia +65.6383.4400+65.6383.4664 FAX Extr...