Extron WMK 100 - Manuals

Extron WMK 100 – Manual in PDF format online.

Manuals:

Manual Extron WMK 100

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - PRELIMINAR; For ideal installation secure the base plate to at least one; Mount the switcher and power supply; Figure 3 — Non-masonry wall mounting; Wall Studs; IG; PEA; Figure 4 — Toggle assembly installation

PRELIMINAR Y WMK 100 Installation Notes, cont'd 2 1B. To mount the WMK 100 onto a non-masonry wall: i. At the desired site locate the wall studs and mark their locations. N For ideal installation secure the base plate to at least one wall stud (see figure 3). Drywall Kap toggles can be used for hole...

Page 3 - iii; Cable the switcher; PVS 305SA Setup Guide; Raceway Option; Figure 6 — Cabling run options; c j; Cabling the switcher

PRELIMINAR Y 3 3. Run cables Run signal cables from the proposed PoleVault input wall plates, control device location, and the speakers to the WMK 100 location. Cables can be routed behind the walls, or through a surface raceway (e.g., Wiremold 700 or 2400 series) directly to the WMK 100.3A. If runn...

Page 4 - Europe; Asia; Japan; Middle East; General Specifications; Mounting; Specifications are subject to change without notice.; © 2009 Extron Electronics. All rights reserved.; Figure 7— Attach WMK 100 cover

4 5. Final installation. a. After completion of cabling, place the cover over the installed plate, and secure at each corner with the provided 6-32 button head screws. N Ensure any cables exiting the box (e.g., to display device and external electrical outlet) pass through a raceway knockout. b. Swi...

Extron Manuals