Extron Ultra Series - Manuals

Table of Contents, cont’d CrossPoint / MAV Matrix Switchers • Table of Contents ii Creating a configuration ....................................................................................................... 3-13 Example 1: Creating a set of video and audio ties ....................................

iii CrossPoint / MAV Matrix Switchers • Table of Contents Chapter Four • Programmer’s Guide .................................................................................. 4-1 Serial Ports ...............................................................................................................

Table of Contents, cont’d CrossPoint / MAV Matrix Switchers • Table of Contents iv Chapter Five • Matrix Software ............................................................................................. 5-1 Matrix Switchers Control Program ..........................................................

v CrossPoint / MAV Matrix Switchers • Table of Contents Chapter Six • HTML Operation ................................................................................................. 6-1 Download the Startup Page ..........................................................................................

Table of Contents, cont’d CrossPoint / MAV Matrix Switchers • Table of Contents vi 68-521-20 A 05 08 All trademarks mentioned in this manual are the properties of their respective owners. TOC updated 4-18. Appendix A • Ethernet Connection ................................................................

CrossPoint / MAV Matrix Switchers 1 Chapter One Introduction About this Manual About the CrossPoint / MAV Matrix Switchers Definitions Features

CrossPoint / MAV Matrix Switchers • Introduction 1-2 Introduction About this Manual This manual contains installation, configuration, and operating information for the complete Extron family of full-function, medium- and large-sized, analog video matrix switchers, specifically: • CrossPoint 450 Plus...

1-3 CrossPoint / MAV Matrix Switchers • Introduction VID 50/ 60 Hz 1 2 3 4 Y/VID B-Y H/HV R/R-Y V G/Y B/B-Y RS -232 LA N RE SE T AC T LIN K RG B/R- Y,Y ,B-Y YC SD I R-Y /C RG B/R -Y,Y ,B-Y /YC /VID 100 -24 0V .3A INPUT OUTPUT INPUT OUTPUT L A N A CT L IN K 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 ...

Introduction, cont’d CrossPoint / MAV Matrix Switchers • Introduction 1-4 DVD Player SoundSystem VCR Video Camera CRT Projector Monitor LCD Projector Extron MAV Plus 1616 HDA Matrix Switcher System Control 16 Outputs 16 Inputs Ethernet C I NPUT S Y IN PUT S C OUT PUT S Y OUT PUT S O U T P U T S 1 3 ...

1-5 CrossPoint / MAV Matrix Switchers • Introduction • 6U high enclosure  CrossPoint Ultra 816, 168, and 1212, 1616 HV and HVA switchers • 8U high enclosure  CrossPoint 450 Plus 2412 and 2424 HV and HVA switchers  MAV Plus 2412, 2424, 3216, and 3232 SVA switchers • 10U high enclosure  CrossPoint...

Introduction, cont’d CrossPoint / MAV Matrix Switchers • Introduction 1-6 The CrossPoint Ultra Series switchers have a minimum bandwidth of 525 MHz (-3 dB). All models can also switch RGBS, RGsB, RsGsBs, HDTV, compo - nent video, S-video, and composite video. CrossPoint 450 Plus switchers There are ...

Introduction, cont’d CrossPoint / MAV Matrix Switchers • Introduction 1-8 Definitions The following terms, which apply to Extron matrix switchers, are used throughout this manual: Tie — An input-to-output connection. Set of ties — An input tied to two or more outputs. (An output can never be tied to...

1-9 CrossPoint / MAV Matrix Switchers • Introduction Digital Sync Validation Processing (DSVP ™) (CrossPoint) — In critical environments or unmanned, remote locations, it may be vital to know that sources are active and switching. Extron’s DSVP confirms that input sources are active by scanning all ...

Introduction, cont’d CrossPoint / MAV Matrix Switchers • Introduction 1-10 Operational flexibility — Operations such as input/output selection, setting of presets, and adjustment of audio levels can be performed on the front panel or via the Ethernet or serial link. The serial links allow remote con...

1-11 CrossPoint / MAV Matrix Switchers • Introduction Power — The matrix switchers’ 100 VAC to 240 VAC, internal power supply(s) provides worldwide power compatibility. Primary and redundant power supplies — (CrossPoint 450 Plus and MAV Plus 2412, 2424, 3216, and 3232 switchers only) Includes two in...

CrossPoint / MAV Matrix Switchers 2 Chapter Two Installation Mounting the Switcher Rear Panel Views Rear Panel Connections Front Panel Configuration Port

CrossPoint / MAV Matrix Switchers • Installation 2-2 Installation Mounting the Switcher The matrix switchers are housed in rack-mountable, metal enclosures with 19" rack ears. The amount of vertical rack space required for each switcher is as follows: • 2U high enclosure  MAV Plus 84, 88, 124, ...

2-3 CrossPoint / MAV Matrix Switchers • Installation Mounting instructions 1 . Insert the switcher into the rack, aligning the holes in the mounting bracket with those in the rack (figure 2-1). 2 . Secure the switcher to the rack using the supplied bolts. Figure 2-1 — Installing the switcher in a ra...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-4 Rear Panel Views All connectors for all switchers are on the rear panel. Figure 2-2 through figure 2-11 show a representative sampling of all of the matrix switchers described in this manual. See “Rear Panel Connections”, on p...

2-5 CrossPoint / MAV Matrix Switchers • Installation CrossPoint Ultra switchers Figure 2-3 shows the CrossPoint Ultra 1616 HVA RGB video and stereo audio matrix switcher. N The CrossPoint Ultra 816 and 168 are housed in the same 6U enclosure, but have fewer output connectors to accommodate their sma...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-6 MAV Plus switchers Figure 2-5 shows the MAV Plus 3232 SVA S-video and stereo audio switcher. N The MAV Plus 2412, 2424, and 3216 are housed in the same 8U enclosure, but have fewer input and/or output connectors to accommodate...

2-7 CrossPoint / MAV Matrix Switchers • Installation Figure 2-7 shows a MAV Plus 1616 HDA component/HDTV video and stereo audio switcher. N The rear panel of the MAV Plus 816 and 168 models have the same features as the MAV Plus 1616 series models (figure 2-7 and figure 2-8), but have fewer input an...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-8 Figure 2-9 shows a MAV Plus 128 AV RCA composite video and stereo audio (with inputs and outputs on RCA connectors) matrix switcher. INPUTS OUTPUTS 1 1 L R 2 2 L R 3 3 L R 4 4 L R 5 5 L R 6 6 L R 7 7 L R 8 8 L R 9 9 L R 10 10 ...

2-9 CrossPoint / MAV Matrix Switchers • Installation Rear Panel Connections C Use Electrostatic discharge (ESD) precautions (be electrically grounded) when making connections. Electrostatic discharge can damage equipment, even if you cannot feel, see, or hear it. C Remove system power before making ...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-10 1 R G B H V 1 2 2 2 2 2 1 1 1 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 RED CrossPoint 450 Plus 2412, 2424, 3216, 3232 CrossPoint Ultra816, 168, 1212, 1616 CrossPoint Ultra84, 88, 124, 128 GREEN BLUE Input 1 Input or Output 1 Input o...

2-11 CrossPoint / MAV Matrix Switchers • Installation Video (MAV Plus switchers) N Video input and output connections are made with female BNC connectors. Some video input and output devices do not have BNC video output connectors. For these cases, a suitable cable or connector adapter is necessary....

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-12 7 Y INPUTS 8 1 2 7 C INPUTS 8 1 2 MAV Plus 816, 168, 1212, 1616 SVA and SV S-video 1 MAV Plus 88, 128, 1212 SVA and SV S-video Y C MAV Plus 2412, 2424, 3216, 3232 SVA and SV S-video 1 21 22 2 3 23 24 4 1 21 22 2 3 23 24 4 1 2...

2-13 CrossPoint / MAV Matrix Switchers • Installation Sync termination switches (CrossPoint) c Sync termination switches — The RGB (CrossPoint) matrix switchers have input Sync termination switches on the rear panel (figure 2-16) that provide a way to condition non-TTL sync levels greater than 5 Vp-...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-14 Audio input and output (audio models) By default, the audio ties follow the video ties. Audio breakaway, which can be activated via the front panel or under Ethernet or serial port control, allows you to select from any one o...

2-15 CrossPoint / MAV Matrix Switchers • Installation e Connections for balanced and unbalanced audio outputs — These 3.5 mm, 5-pole captive screw connectors output the selected unamplified, line level audio. Connect audio devices, such as an audio amplifier or powered speakers. See figure 2-19 to p...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-16 RS-232/RS-422 h RS-232/RS-422 connector — Connect a host device, such as a computer, touch panel control, or RS-232 capable PDA to the switcher via this 9-pin D connector for serial RS-232/RS-422 control (figure 2-20). RS-232...

2-17 CrossPoint / MAV Matrix Switchers • Installation Cabling and RJ-45 connector wiring It is vital that your Ethernet cables be the correct cables, and that they be properly terminated with the correct pinout. Ethernet links use Category (CAT) 5e or CAT 6, unshielded twisted pair (UTP) or shielded...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-18 Reset button j Reset button — The Reset button initiates four levels of reset to the matrix switcher. Press and hold the button while the switcher is running or while you power up the switcher for different reset levels. See ...

2-19 CrossPoint / MAV Matrix Switchers • Installation Figure 2-23 shows another configuration, in which the timing source passes through three video cameras and a video scan converter before connecting to the switcher. This type of video camera is capable of synchronizing with the external timing so...

Installation, cont’d CrossPoint / MAV Matrix Switchers • Installation 2-20 Front Panel Configuration Port (Matrix Sizes up to 1616 Only) AUDIO VIDEO I/O CONTROL ENTER PRESET VIEW ESC CONFIG ULTRA-WIDEBAND MATRIX SWITCHER WITH ADSP ™ CROSSPOINT ULTRA SERIES 13 Figure 2-24 — Front panel configuration ...

2-21 CrossPoint / MAV Matrix Switchers • Installation N A front panel Configuration port connection and a rear panel Remote port connection can both be active at the same time. This port is RS-232 only, with its default protocols as follows: • 9600 baud • no parity • 8 data bits • 1 stop bit • no fl...

CrossPoint / MAV Matrix Switchers 3 Chapter Three Operation Front Panel Controls and Indicators Front Panel Operations Rear Panel Operations Optimizing the Audio (Audio Models) Troubleshooting Configuration Worksheets

CrossPoint / MAV Matrix Switchers • Operation 3-2 Operation N The operation of the CrossPoint 450 Plus, CrossPoint Ultra, and MAV Plus switchers is very similar. There are two exceptions: • The video selection button is labeled “RGBHV” on the CrossPoint models and “Video” on the MAV Plus switchers. ...

3-3 CrossPoint / MAV Matrix Switchers • Operation AUDIO VIDEO I/O CONTROL ENTER PRESET VIEW ESC INPUTS 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 13 1 2 3 4 5 6 7 8 9 10 11 12 OUTPUTS 14 15 16 13 AV MATRIX SWITCHER WITH IP LINK™ MAV PLUS SERIES CONFIG 8 6 5 4 3 7 1 2 Figure 3-2 — Front Panel, MAV Plus 1616...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-4 Input and output buttons Primary functions Action: Select input or output for tie being created. Indications: Blink : potential tie/untie. Lit : current tie Amber : video and audio tie Green : video only tie Red : audio only tie 1 2...

3-5 CrossPoint / MAV Matrix Switchers • Operation a Input buttons — The input buttons have one primary function (•) and seven secondary functions ( ❏ ): • Select and identify an input. ❏ (Input 1 only) With the Output 1 button, select I/O Group mode. See “I/O grouping” on page 3-24. ❏ Assign an inpu...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-6 Control buttons Primary functions Action: Save changes Select Preset mode Select View mode Cancel/escape Indication: Blink : save needed Blink : Save preset Lit : Recall preset View mode selected Flashes once ENTER PRESET VIEW ESC S...

3-7 CrossPoint / MAV Matrix Switchers • Operation d Preset button — The Preset button has two primary functions (•) and three secondary functions ( ❏ ): • Activates Save Preset mode to save a configuration as a preset and Recall Preset mode to activate a previously-defined preset. • Blinks when Save...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-8 f Esc ( > ) button — The Esc ( > ) button has two primary functions (•) and six secondary functions ( ❏ ): • Cancel operations or selections in progress and reset the front panel button indicators. N The Esc ( > ) button do...

3-9 CrossPoint / MAV Matrix Switchers • Operation You must specify video, audio, or both when you are creating or viewing a configuration. This is done with the RGBHV button (CrossPoint switchers) or Video button (MAV Plus switchers) ( g ) and Audio ( h ) buttons. g RGBHV (CrossPoint) button or Vide...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-10 Power indicators (2412 and larger models only) i Primary and Redundant Power Supply LEDs — Green — Indicates that the associated power supply is operating within normal tolerances. Red — Indicates that the associated power supply i...

3-11 CrossPoint / MAV Matrix Switchers • Operation Front Panel Operations The following paragraphs detail the power-up process and then provide sample procedures for the following actions: • Creating ties, sets of ties, and configurations • Changing a configuration • Viewing ties, sets of ties, and ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-12 Front panel security lockouts In the procedural descriptions that follow, it is assumed that the switcher is in Lock mode 0 (fully unlocked). The following two Lock modes are also available: • Lock mode 1 — All changes are locked f...

3-13 CrossPoint / MAV Matrix Switchers • Operation Creating a configuration The current configuration can be changed using the front panel buttons. Change the current configuration as follows: 1 . Press the Esc button to clear any input button indicators, output button indicators, or control button ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-14 Example 1: Creating a set of video and audio ties In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your action. N This example assumes that there are no t...

3-15 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the output 3, output 4, and output 8 buttons (figure 3-8). C O N T R O L PRESET ENTER ESC VIEW 1 2 3 4 5 6 7 8 1 5 16 17 18 19 20 21 22 23 24 31 32 OU TP U TS Press and release the Output 3, Output 4, and Output 8 buttons.The b...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-16 Example 2: Adding a tie to a set of video and audio ties In the following example, a new video tie is added to the current configuration. The steps show the front panel indications that result from your action. N This example assum...

3-17 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the output 1 button (figure 3-14). 1 2 3 4 5 6 7 8 1 5 16 17 18 19 20 21 22 23 24 31 32 OU TP U TS Press and release the Output 1 button.The button blinks green to indicate that only the selected RGBHV or video input will be ti...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-18 Example 3: Removing a tie from a set of video and audio ties In the following example, an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action. N This...

3-19 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the output 4 button (figure 3-20). 1 2 3 4 5 6 7 8 1 5 16 17 18 19 20 21 22 23 24 31 32 OU TP U TS C O N T R O L PRESET ENTER ESC VIEW Press and release the Output 4 button.The button blinks red to indicate the pending change: ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-20 Viewing a configuration The current configuration can be viewed using the front panel buttons. The View-only mode prevents inadvertent changes to the current configuration. View-only mode also provides a way to mute video and audio...

3-21 CrossPoint / MAV Matrix Switchers • Operation Example 4: Viewing video and audio, audio only, and video only ties In the following example, we view the video and audio, audio-only, and video-only ties in the current configuration. The steps show the front panel indications that result from your...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-22 4 . Press and release the input 5 button (figure 3-25). 1 2 3 4 5 6 7 8 1 6 17 18 19 20 21 22 23 24 32 I NPU TS 1 2 3 4 5 6 7 8 1 6 17 18 19 20 21 22 23 24 32 U O TPUTS Green Green Amber Amber The output buttons for outputs that ar...

3-23 CrossPoint / MAV Matrix Switchers • Operation 6 . Press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio button to toggle the Video button on green and the Audio button either unlit or providing background illumination (figure 3-27). 1 2 3 4 5 6 7 ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-24 I/O grouping I/O grouping is a matrix switcher feature that allows you to subdivide the front panel controls of the matrix into four smaller functional sub-switchers and limit tie creation using the front panel only . Inputs and ou...

3-25 CrossPoint / MAV Matrix Switchers • Operation 1 . Press the Esc button to clear any input buttons, output buttons, or control buttons that may be lit. 2 . To enter I/O Group mode, press and hold the Input 1 and Output 1 buttons simultaneously until the input and output buttons light to display ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-26 Example 5: Grouping inputs and outputs In the following an example, several switcher inputs and outputs are assigned to groups. The steps show the front panel indications that result from your action. 1 . Press and release the Esc ...

3-27 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the input 1 through 4 and output 1 through 4 buttons (figure 3-33). 1 2 3 4 5 6 7 8 15 16 17 18 19 20 21 22 23 24 31 32 1 2 3 4 5 6 7 8 15 16 17 18 19 20 21 22 23 24 31 32 I NPU TS OU TP U TS Press and release the Input 1 throu...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-28 7 . Simultaneously press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and Audio button (figure 3-36). The switcher exits I/O Group mode. N As an alternative, if you do not push any front panel b...

3-29 CrossPoint / MAV Matrix Switchers • Operation Example 6: Setting the RGB delay for an output In the following example, the RGB delay is increased for output 17. The steps show the front panel indications that result from your action. 1 . Press and release the Esc button (figure 3-37). C O N T R...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-30 4 . Press and release the Esc ( > ) button once (figure 3-40) to increase the RGB delay by a half second. Press and release the Esc ( > ) button twice more to increase the RGB delay by a whole second. Note the input button in...

3-31 CrossPoint / MAV Matrix Switchers • Operation Using presets The current configuration (configuration 0) can be saved as a preset in any one of 32 preset memory addresses. Preset locations are assigned to the input buttons and (where necessary) output buttons. Up to 20 or 32 (depending on the nu...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-32 Example 7: Saving a preset In the following example, the current configuration is saved as a preset. The steps show the front panel indications that result from your action. 1 . Press and release the Esc button (figure 3-43). C O N...

3-33 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the Enter button (figure 3-46). The current configuration is now stored in the selected memory location. C O N T R O L PRESET ENTER ESC VIEW The Enter and Preset buttons return to unlit or background illumination. Press the Ent...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-34 3 . Press and release the input or output button for the desired preset (figure 3-49). 1 2 3 4 15 16 17 18 19 20 31 32 I NPU TS C O N T R O L PRESET ENTER ESC VIEW Press and release the Input 1 button. The button blinks red to indi...

3-35 CrossPoint / MAV Matrix Switchers • Operation Muting and unmuting video and/or audio outputs Individual outputs can be muted or unmuted as follows: N Mutes are protected when front panel Lock mode 2 is selected. You can view the status of the output (muted or unmuted) in Lock mode 2 but you can...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-36 Example 9: Muting and unmuting an audio/RS-232 output In the following example, several switcher outputs are muted and unmuted. The steps show the front panel indications that result from your action. 1 . Press and release the Esc ...

3-37 CrossPoint / MAV Matrix Switchers • Operation 4 . One at a time , press and hold the Output 3 button and then the Output 4 button (figure 3-53) for approximately 2 seconds until each button begins to blink. The output 3 and output 4 video and audio signals are muted. 3 4 3 4 The button blinks a...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-38 Viewing and adjusting the input audio level (audio models) On models with audio, the audio level of each input can be displayed and adjusted through a range of -18 dB to +24 dB to ensure that there is no noticeable volume differenc...

3-39 CrossPoint / MAV Matrix Switchers • Operation 5 . Press and release the Audio button to exit the Audio mode. The Audio button stops blinking. N • Pressing the Enter or Preset button also exits Audio mode. Pressing the Preset button changes to Recall Preset mode. • There is one audio level setti...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-40 5 6 7 8 12 13 4 3 2 1 10 9 11 0 = unlit button = lit button Green indicates a positive (gain) level, red indicates a negative (attenuation) level 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-42 3 . Press and release the Input 5 button (figure 3-59). Press and release the Input 5 button.The button lights green. Each output button indicates 1 dB when lit.When the buttons are lit green, they indicate a gain (+) audio level.W...

3-43 CrossPoint / MAV Matrix Switchers • Operation 4 . Press and release the View ( < ) button once (figure 3-62) to decrease the input audio level by 1 dB. Press and release the View ( < ) button several more times (figure 3-62) to decrease the input audio level by 1 dB per button press. Note...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-44 5 . Press and release the Audio button (figure 3-65). I / O RGBHV AUDIO The Audio button stops blinking and lights. Press the Audio button to exit audio mode. All input buttons and output buttons return to unlit or background illum...

3-45 CrossPoint / MAV Matrix Switchers • Operation Reading the displayed volume N This section is a detailed look at reading the output volume display on the switcher’s front panel. If you do not need to read the exact value of the volume setting, skip this section. There are 65 steps of volume atte...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-46 5 Highest # input button lit 32-input switcher dB of attenuation Output volume 76 0% None 16-input switcher None 12-input switcher None Highest # input button lit 32-input switcher dB of attenuation Output volume 16-input switcher ...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-48 Example 11: Viewing and adjusting an output volume level In the following example, the audio output volume is viewed and adjusted. The steps show the front panel indications that result from your action. Audio output volume is disp...

3-49 CrossPoint / MAV Matrix Switchers • Operation Figure 3-69 shows the same volume (41.5%) as in figure 3-68, but displayed on a 16-input-button switcher, such as an MAV Plus 1616 HDA. 11 16 2 1 3 4 5 6 7 8 9 10 14 12 13 15 • • • INPUTS Blinking button –39 dB attenuation, 41.5% volume Unlit button...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-50 4 . Press and release the Esc ( > ) button once (figure 3-71) to increase the volume by 1.5%. Press and release the Esc ( > ) button several more times (figure 3-71) to increase the volume by 1.5% per button press. Note the i...

3-51 CrossPoint / MAV Matrix Switchers • Operation Figure 3-73 shows the same volume (61%) as in figure 3-71, but displayed on a 12-input-button switcher, such as a MAV Plus 128 RCA. INPUTS 1 2 3 4 5 6 7 8 9 10 11 12 •• • Lit Buttons Unlit Buttons Fast Blinking Button The input LEDs display the sele...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-52 Setting the front panel locks (Executive modes) The matrix switchers have three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are: • Lock mode 0 — The front pane...

3-53 CrossPoint / MAV Matrix Switchers • Operation Selecting Lock mode 2 or toggling between mode 2 and mode 1 N If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. If the switcher is in Lock mode 2, this procedure selects mode 1. Toggle the lock on and off by pressing and ho...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-54 Background illumination The buttons on the front panel can be set to provide amber background illumination at all times or the background illumination can be turned off. To toggle the background illumination on or off, press and ho...

3-55 CrossPoint / MAV Matrix Switchers • Operation 2 . Release the Control buttons. N The serial port settings are protected when front panel Lock mode 2 is selected. You can view the settings in Lock mode 2 but you cannot change them from the front panel. See “Setting the front panel Locks ( Execut...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-56 Reset Mode Comparison/Summary Mode Activation Result Purpose/Notes 1 Hold down the recessed Reset button while applying power to the switcher. N After a mode 1 reset is performed, update the switcher’s firmware to the latest versio...

3-57 CrossPoint / MAV Matrix Switchers • Operation Performing soft system resets (resets 3, 4, and 5) Perform a soft reset of the switcher as follows: 1 . Use an Extron Tweeker or other small screwdriver to press and hold the rear panel Reset button until the front panel Video and Audio buttons blin...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-58 Performing a hard reset The hard reset function restores the switcher to the base firmware that it was shipped with. This reset also clears all ties and presets, clears all video and audio mutes, clears all I/O grouping, clears all...

3-59 CrossPoint / MAV Matrix Switchers • Operation Optimizing the Audio (Audio Models) Each individual input audio level can be adjusted within a range of -18 dB to +24 dB, so there are no noticeable volume differences between sources and for the best headroom and signal-to-noise ratio. Adjust the a...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-60 Configuration Worksheets Rather than trying to remember the configuration for each preset, use worksheets to record this information. Make copies of the blank worksheet on page 3-63 (32-input button and -output button switchers) an...

3-61 CrossPoint / MAV Matrix Switchers • Operation Worksheet example 2: Daily configuration Figure 3-85 continues from worksheet example 1 by showing the video and audio ties that make up the configuration of preset 1. Solid lines shows video ties and dashed lines show the audio ties. Main Hall PJ#1...

Operation, cont’d CrossPoint / MAV Matrix Switchers • Operation 3-62 Worksheet example 3: Test configuration The A/V system in our fictional organization needs to be fine tuned on a regular basis. Figure 3-86 shows a typical test configuration, with an Extron video test generator (input 12) generati...

3-63 CrossPoint / MAV Matrix Switchers • Operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 26 27 28 29 30 31 32 In pu t so ur ce s O ut pu t d es tin at io ns P re se t # T itl e: V id eo : A ud io : F ill in th e pr es et n um be r a nd u se c ol or s, o r d as he s, e tc . t o m ak e co nn ec tin g...

3-65 CrossPoint / MAV Matrix Switchers • Operation 16-button switchers configuration worksheet 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 15 16 10 12 13 14 15 16 9 In pu t so ur ce s O ut pu t d es tin at io ns P re se t # T itl e: V id eo : A ud io : F ill in th e pr es et n um be r a nd u...

CrossPoint / MAV Matrix Switchers 4 Chapter Four Programmer’s Guide Serial Ports Ethernet (LAN) Port Host-to-Switcher Instructions Switcher-Initiated Messages Switcher Error Responses Using the Command/Response Tables Command/Response Table for SIS Commands Command Response Table for IP-specific SIS...

CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-2 Programmer’s Guide Serial Ports The switchers have two serial ports that can be connected to a host device such as a computer running the HyperTerminal utility, an RS-232 capable PDA, or a control system. These ports make serial control of t...

4-3 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Front panel Configuration port N This port is hardwired for RS-232 only. The optional 9-pin D to 2.5 mm mini jack TRS RS-232 cable, part # 70-335-01 (figure 4-2), can be used for connection to the Configuration port. 6 feet (1.8 m) Part #70-...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-4 Ethernet (LAN) Port The rear panel Ethernet connector on the switcher can be connected to an Ethernet LAN or WAN. Communication between the switcher and the controlling device is via Telnet (a TCP socket using port...

4-5 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Default IP addresses To access the CrossPoint or MAV Plus switcher via the LAN port, you need the Extron IP address, and may need the subnet mask and the gateway address. If the IP address has been changed to an address comprised of words an...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-6 Verbose Mode Telnet connections to a CrossPoint or MAV Plus switcher can be used to monitor for changes that occur on the switcher, such as front panel operations and SIS commands from other Telnet sockets or a ser...

4-7 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Spr nn ] The switcher initiates the Spr message when a preset has been saved from the front panel. nn is the preset number. Rpr nn ] The switcher initiates the Rpr message when a preset has been recalled from the front panel. nn is the prese...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-8 Using the Command/Response Tables The command/response tables begin on page 4-10. Lower-case letters are acceptable in the command field except where indicated for the gain and attenuation commands. The table below...

4-9 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Command/Response Table for SIS Commands Symbol definitions Symbols are used throughout the table to represent variables in the command/ response fields. Command and response examples are shown throughout the table. N Input and output numbers...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-10 Command ASCII command (host to switcher) Response (switcher to host) Additional description Create ties N X@ = Input number 00 – (maximum number of inputs for your model) (00 = untied) X# = Output number 01 – (max...

4-11 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description Video mute commands N X# = Output number 01 – (maximum number of outputs for your model) X$ = Mu...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-12 Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description Audio output volume N X# = Output number 01 – (maximum number of outp...

4-13 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description Audio mute commands N X# = Output number 01 – (maximum number of outputs for your model) X$ = Mu...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-18 Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description I/O Grouping (continued) N X1^ = Group # (for I/O grouping) 1 through...

4-19 CrossPoint / MAV Matrix Switchers • Programmer’s Guide Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description Lock (executive) modes N X$ = Lock mode 0, 1, or 2 N See “Setting the front panel locks ( Execut...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-20 Command/response table for SIS commands (continued) Command ASCII command (host to switcher) Response (switcher to host) Additional description Information requests N X1& = Inputs Total number of inputs for th...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-22 Command/Response Table for IP-specific SIS Commands Symbol definitions X3) = Matrix name (Up to 240 alphanumeric characters) N The following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-24 Command/response table for IP-specific SIS commands Command ASCII command (host to switcher) Response (switcher to host) Additional description IP setup commands Set matrix name EX3) CN } Ipn• X3)] Read matrix nam...

Programmer’s Guide, cont’d CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-26 Special Characters The HTML language reserves certain characters for specific functions. The switcher does not accept these characters as part of preset names, the switcher ’s name, passwords, or locally created f...

CrossPoint / MAV Matrix Switchers 5 Chapter Five Matrix Software Matrix Switchers Control Program Special Characters Button Label Generator Program

CrossPoint / MAV Matrix Switchers • Matrix Software 5-2 Matrix Software Matrix Switchers Control Program The Windows ® -based Extron Matrix Switchers Control Program communicates with the switcher via the Ethernet LAN port, the rear panel Remote RS-232/RS-422 port, and the front panel Configuration ...

5-3 CrossPoint / MAV Matrix Switchers • Matrix Software 4 . Follow the on-screen instructions. By default, the installation of the Matrix Switchers Control Program creates a C:\Program Files\Extron\ Matrix_ Switchers directory, and it places the following four icons into a group folder named “Extron...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-4 Using the Matrix Switcher Control software Many items found in the Matrix Switchers Control Program are also accessible via front panel controls (see chapter 3, ”Operation”) and under SIS control (see chapter 4, “Program...

5-5 CrossPoint / MAV Matrix Switchers • Matrix Software a . Examine the Matrix IP Address field in the IP Connection window. The field displays the last Matrix IP address entered. If the IP address is correct : Proceed to step 3b . If the address is not correct: Either click in the Matrix IP Address...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-6 Figure 5-6 — Sample program window (complete) • To set up audio in Follow mode (audio and video have the same tie configuration), select the Follow box at the bottom of the window. To set up audio in breakaway mode (audi...

5-7 CrossPoint / MAV Matrix Switchers • Matrix Software IP Settings/Options window The IP Settings/Options window (figure 5-7) provides a location for viewing and, if connected via either serial port or if you are logged on via the LAN port as an administrator, editing settings unique to the Etherne...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-8 Edit this field as follows: 1 . Click in the Matrix IP address field. The graphic cursor becomes a text cursor. 2 . Edit the address as desired. 3 . Press the Tab key on the keyboard or click in another field to exit the...

5-9 CrossPoint / MAV Matrix Switchers • Matrix Software Subnet Mask field The Subnet Mask field is used to determine whether the CrossPoint or MAV switcher is on the same subnet as the controlling PC or the mail server when you are subnetting. For more information, see “Subnetting — A Primer”, in Ap...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-10 Sync Time to PC button Clicking the Sync Time to PC button causes the computer you are operating to send its internal time to the switcher in a set time command. GMT (offset) field The GMT field displays the amount of t...

5-11 CrossPoint / MAV Matrix Switchers • Matrix Software User Password field The User Password field displays the password required to log on to the CrossPoint or MAV switcher via the LAN port as a user, without all of the administrator ’s rights and privileges. Passwords are case sensitive and are ...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-12 E-mail Addressee fields The eight E-mail Addressee fields permit the administrator to identify the e-mail addresses of the personnel to whom the CrossPoint or MAV switcher e-mails notification of its failure and repair ...

5-13 CrossPoint / MAV Matrix Switchers • Matrix Software Updating firmware The firmware upgrade utility provides a way to replace the firmware that is coded on the switcher ’s control board without taking the switcher out of service. N The Firmware Loader must be installed on your computer to perfor...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-14 6 4 5 4 Folder wherefirmware isinstalled Figure 5-10 — Downloading firmware upgrade files 5 . Click Next . The program extracts the firmware files and places them in a folder identified in the InstallShield Wizard windo...

5-15 CrossPoint / MAV Matrix Switchers • Matrix Software 6 . Click Finish to exit the program. 7 . Connect a Windows-based computer to either switcher serial port or the switcher LAN port. See chapter 2, “Installation”, for more details. 8 . Start the Matrix Switchers Control Program and connect to ...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-16 Serial-port-connected firmware upload 10 11 Figure 5-12 — Firmware loading 10 . Click Browse . The select file window appears. 11 . Navigate to the folder where you saved the firmware upgrade file. Select the file and c...

5-17 CrossPoint / MAV Matrix Switchers • Matrix Software 12 14 13 13 Figure 5-13 — Confirm window 13 . If necessary, change the port number in the device port field: • Rear panel RS-232/RS-422 port, enter 1 . • Front panel Configuration port, enter 2 . Click the OK button. The Firmware Loader report...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-18 Uploading HTML files You can create customized HTML pages for the switcher to display. The HTML Files List window (figure 5-14) provides a way to view the contents of the switcher ’s file system and to upload custom HTM...

5-19 CrossPoint / MAV Matrix Switchers • Matrix Software Windows buttons, drop boxes, and trashcan The buttons, drop boxes, and trash can on the right side of the program window perform the following functions: Power — Unavailable for CrossPoint and MAV switchers, because the switcher power cannot b...

5-21 CrossPoint / MAV Matrix Switchers • Matrix Software Hardware status — Provides an overall view of the status of the matrix switcher, including the primary and secondary power supply status and the individual voltages, the fan and temperature status, the Remote RS-232/RS-422 port configuration, ...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-22 Preferences menu Immediate changes — Causes configuration changes to take effect immediately. Hold/verify changes — Delays implementation of configuration changes until the Changes – Take button is pressed. Ties as line...

5-23 CrossPoint / MAV Matrix Switchers • Matrix Software Icons in I/O boxes — Erases any numbers in the I/O boxes in the Control Program window (figure 5-6). You can place icons in the boxes. Numbers in I/O boxes — Erases any icons in the I/O boxes in the Control Program window and fills each box wi...

Matrix Software, cont’d CrossPoint / MAV Matrix Switchers • Matrix Software 5-24 Special Characters The HTML language reserves certain characters for specific functions. The switcher will not accept these characters as part of preset names, the switcher ’s name, passwords, or locally created file na...

5-25 CrossPoint / MAV Matrix Switchers • Matrix Software Using the Button-Label Generator software 1 . To run the Button-Label Generator program, click Start > Programs > Extron Electronics > Button Label Generator > Button Label Generator . The Button-Label Generator window appears (fig...

CrossPoint / MAV Matrix Switchers 6 Chapter Six HTML Operation Download the Startup Page Status Tab Configuration Tab File Management Tab Control Tab Special Characters

CrossPoint / MAV Matrix Switchers • HTML Operation 6-2 HTML Operation The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN, using a web browser such as Microsoft ® Internet Explorer ® . The browser ’s display of the switcher ’s status or operation has the appe...

6-3 CrossPoint / MAV Matrix Switchers • HTML Operation a . Does the address include a specific file name, such as 10.13.156.10/file_name.html? If so , the switcher downloads that HTML page. b . Is there a file in the switcher ’s memory that is named “index.html”? If so , the switcher downloads “inde...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-4 DSVP page (CrossPoint switchers) You can view a snapshot-in-time of the input frequencies of connected inputs on the Digital Sync Validation Processing (DSVP) page (figure 6-3). Click the DSVP link to the left of the Statu...

6-5 CrossPoint / MAV Matrix Switchers • HTML Operation Configuration Tab System Settings Page The CrossPoint or MAV switcher downloads the System Settings page (figure 6-4) when you click the Configuration tab. The screen consists of fields in which you can view and edit IP administration and system...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-6 IP Settings fields The IP Settings fields provide a location for viewing and editing settings unique to the Ethernet interface. After editing any of the settings on this page, click the Submit button at the bottom of the p...

6-7 CrossPoint / MAV Matrix Switchers • HTML Operation Date/Time Settings fields The Date/Time Settings fields (figure 6-5) provide a location for viewing and setting the time functions. Figure 6-5 — Date/Time Settings fields Change the date and time settings as follows: 1 . Click the desired value’...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-8 Passwords page Access the Passwords page (figure 6-6) by clicking the Passwords link on the System Settings page. Refresh System Settings Firmware Upgrade Email Settings Figure 6-6 — Passwords page The fields on the Passwo...

6-9 CrossPoint / MAV Matrix Switchers • HTML Operation Email Settings page Reach the Email Settings page (figure 6-7) by clicking the Email Settings link on the System Settings page. The Email Settings page has fields for setting up the switcher ’s e-mail notification capabilities. For the e-mail se...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-10 Email address fields The eight Email address fields identify the e-mail addresses of the personnel to whom the CrossPoint or MAV switcher e-mails notification of its failure and repair status. Standard e-mail address conv...

6-11 CrossPoint / MAV Matrix Switchers • HTML Operation 6 . Click the Firmware Upgrade link. 7 . Click the Browse button. An open file window appears. 8 . Navigate to the folder where you saved the firmware upgrade file. Select the file. N Valid firmware files must have the file extension “.S19”. An...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-12 N The following characters are invalid in file names: {space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?. 1 . Click the Browse button. 2 . Browse through your PC system and select the desired file(s). N If you want o...

6-13 CrossPoint / MAV Matrix Switchers • HTML Operation Creating or deleting a tie Make or break a tie as follows: 1 . Click the Video Only , Audio Only , or Video & Audio button to select video, audio, or both for switching (audio breakaway or audio follow). Each mouse click on a button toggles...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-14 Change the input gain and attenuation (audio models) Users can set each input’s level of audio gain or attenuation (-18 dB to +24 dB) from the RGB and Audio Settings page. Audio levels can be adjusted so there are no noti...

6-15 CrossPoint / MAV Matrix Switchers • HTML Operation Mute and unmute one or all outputs Mute one or all outputs as follows: 1 . To select an individual output to mute or unmute , click the Output drop box. A drop down scroll box appears (figure 6-14). Figure 6-14 — Output selection drop box 2 . C...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-16 Change the RGB delay (CrossPoint switchers) The RGB delay interval defines how long the screen is blanked when switching to a new input for the selected output.Change the RGB delay as follows: 1 . Click the Output drop bo...

6-17 CrossPoint / MAV Matrix Switchers • HTML Operation Change the output volume level (audio models) Users can set each output’s volume level through a range of zero steps of attenuation (full attenuation, minimum volume) to 64 steps of attenuation (no attenuation, full volume) from the RGB and Aud...

6-19 CrossPoint / MAV Matrix Switchers • HTML Operation Global Presets page You can save and recall global presets from the Global presets page (figure 6-20). Access the Global presets page by clicking the Global Presets link on the left of the Control page. Set and View Ties Refresh RGB & Audio...

HTML Operation, cont’d CrossPoint / MAV Matrix Switchers • HTML Operation 6-20 Recalling a preset To recall a global preset to be the current configuration, click the button associated with the desired preset. Special Characters The HTML language reserves certain characters for specific functions. T...

CrossPoint / MAV Matrix Switchers A Appendix A Ethernet Connection Ethernet Link Subnetting — A Primer

CrossPoint / MAV Matrix Switchers • Ethernet Connection A-2 Ethernet Connection Ethernet Link The rear panel Ethernet connector on the CrossPoint or MAV switcher can be connected to an Ethernet LAN or WAN. This connection makes SIS control of the switcher possible using a computer connected to the s...

A-3 CrossPoint / MAV Matrix Switchers • Ethernet Connection Pinging to determine Extron IP address The Microsoft ® Ping utility is available at the DOS prompt. Ping tests the Ethernet interface between the computer and the CrossPoint or MAV switcher. Ping can also be used to determine the actual num...

Ethernet Connection, cont’d CrossPoint / MAV Matrix Switchers • Ethernet Connection A-4 Microsoft (R) windows 2000 (TM) Version 5.0 (Build 2195)Welcome to Microsoft Telnet ClientTelnet Client Build 5.00.99203.1 Escape Character is 'CTRL+]' Microsoft Telnet> Figure A-3 — Telnet screen Telnet tips ...

A-5 CrossPoint / MAV Matrix Switchers • Ethernet Connection Local echo Once connected to the CrossPoint or MAV switcher, by default, Telnet does not display your keystrokes on the screen. SIS commands are typed in blindly and only the SIS responses are displayed on the screen. To command Telnet to s...

Ethernet Connection, cont’d CrossPoint / MAV Matrix Switchers • Ethernet Connection A-6 Subnetting — A Primer It is not the purpose of this manual to describe TCP/IP protocol in detail. However, some understanding of TCP/IP subnetting (a subnet is a sub set of a net work — a set of IP devices that h...

A-7 CrossPoint / MAV Matrix Switchers • Ethernet Connection Determining whether devices are on the same subnet To determine the subnet, the local device’s IP address is compared to the remote device’s IP address (figure A-6). Each address’s octets are compared or not compared , depending on the valu...

CrossPoint / MAV Matrix Switchers B Appendix B Reference Information CrossPoint 450 Plus Specifications CrossPoint Ultra Specifications MAV Plus Specifications Part Numbers and Accessories Button Labels

CrossPoint / MAV Matrix Switchers • Reference Information B-2 Reference Information CrossPoint 450 Plus Specifications Video Routing 2412 Series .......................... 24 x 12 matrix 2424 Series .......................... 24 x 24 matrix 3216 Series .......................... 32 x 16 matrix 3232 ...

B-3 CrossPoint / MAV Matrix Switchers • Reference Information Sync Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs Output type .................................... RGBHV, RGBS, RGsB, RsGsBs (follows input) Input level ...................................... 0.5 V to 5.0 V...

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-4 Control/remote — switcher Serial host control port ................. 1 RS-232 or RS-422, rear panel 9-pin female D connector Baud rate and protocol ................. 9600 (default), 19200, 38400, 115200 baud ...

B-5 CrossPoint / MAV Matrix Switchers • Reference Information CrossPoint Ultra Specifications Video Routing 84 Series .............................. 8 x 4 matrix 88 Series .............................. 8 x 8 matrix 816 Series ............................ 8 x 16 matrix 124 Series ......................

B-7 CrossPoint / MAV Matrix Switchers • Reference Information Audio input— audio models only Number/signal type ..................... 8, 12, or 16 stereo, balanced/unbalanced Connectors ..................................... (8, 12, or 16) 3.5 mm captive screw connectors, 5 pole Impedance ..............

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-8 General Power 84/88/124/128 Series ....... 35 watts (typical) 38 watts (loaded) 816/1212/168/1616 Series 45 watts (typical) 52 watts (loaded) Temperature/humidity ................ Storage: -40 to +158 °F (-40...

B-9 CrossPoint / MAV Matrix Switchers • Reference Information MAV Plus Specifications Video — video models Routing 88 Series .............................. 8 x 8 matrix 816 Series ............................ 8 x 16 matrix 128 Series ............................ 12 x 8 matrix 1212 Series ..............

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-10 3216/3232 Series composite video models 32 BNC female 3216/3232 Series S-video models 32 x 2 BNC female Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for com...

B-11 CrossPoint / MAV Matrix Switchers • Reference Information Audio — audio models Routing 88 Series .............................. 8 x 8 stereo matrix 816 Series ............................ 8 x 16 stereo matrix 128 Series ............................ 12 x 8 stereo matrix 164 Series .................

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-12 Audio output — audio models Number/signal type MAV Plus 128 AV RCA ..... 8 stereo, unbalanced All other models ................ 4, 8, 12, 16, 24, or 32 stereo, balanced/unbalanced Connectors MAV Plus 128 AV ...

B-13 CrossPoint / MAV Matrix Switchers • Reference Information Enclosure dimensions (Depth excludes connectors and controls. Width excludes rack ears.) 88/128 Series (all) and 816/1212/164/168/1616 Composite Video Series and/or Stereo Audio Series 3.5" H x 17.0" W x 9.4" D (2U high, full...

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-14 Part Numbers and Accessories CrossPoint 450 Plus matrix switcher part numbers Matrix switcher part numbers Part number CrossPoint 450 Plus 2412 HV 60-470-12 CrossPoint 450 Plus 2412 HVA 60-470-11 CrossPoint ...

B-15 CrossPoint / MAV Matrix Switchers • Reference Information MAV Plus matrix switcher part numbers MAV Plus matrix switcher part numbers Part number MAV Plus 84 HD component/HDTV video 60-658DZ MAV Plus 84 HDA component/HDTV video and audio 60-658DY MAV Plus 84 SV S-video 60-685CZ MAV Plus 84 SVA ...

B-17 CrossPoint / MAV Matrix Switchers • Reference Information Included parts These items are included in each order for a CrossPoint or MAV matrix switcher: Included parts Part number Tweeker (small screwdriver) CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus User’s Manual 5-pole captive screw au...

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-18 Accessory Part number MKP 1000 remote keypad MKP 1000, black 60-239-02 MKP 1000, white 60-239-03 MKP 1000WT, water-tight, black 60-239-52 MKP 1000WT, water-tight, white 60-239-53 MCP 1000M (master) matrix co...

B-19 CrossPoint / MAV Matrix Switchers • Reference Information Plenum BNC-5 mini high resolution cable Part number Plenum BNC-5 Mini HR bulk, 500' 22-103-02 Plenum BNC-5 Mini HR bulk, 1000' 22-103-03 N Bulk cable in lengths up to 5000’ (1524 meter) rolls is available with or without connectors. Asso...

Reference Information, cont’d CrossPoint / MAV Matrix Switchers • Reference Information B-20 Button Labels Page B-21 provides strips of blank button labels. If desired, copy them or cut them out, write button information in each button area as desired, and put them in the switcher ’s input or output...

Extron’s Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will,...