Extron PCM 240 - Manuals

Extron PCM 240 – Manual in PDF format online.

Manuals:

Manual Extron PCM 240

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - If this is not required, proceed to step 3.; Step 2 — Install the Electrical Box.; On the room side of the tile, slide the plaster ring under the screws.; Step 3 — Secure the PCM Base Plate to the Ceiling.; Tie wire installation; Replace the cut ceiling tile, checking the orientation.; Risk of Personal Injury and property damage.; • DO NOT rest or lean on the mounting plate or

2 PCM 240 • Installation Guide (Continued) f. Using these dimensions, mark and cut a hole (using a 2 inch hole saw) for the projector pipe in the removed ceiling tile (see figure 3). g. If required, to prepare the ceiling tile for a power outlet, use the PCM plate to trace and cut out the 2-gang hol...

Page 3 - Potential Damage to Property.; • The four hanging wires should be taut, taking; Step 4 — Final Installation.; To fit the mounting pole, do the following:; PCM; Adjust the Turnbuckles.

3 f. Loop the safety cable through the center anchor or lag eye bolt, attach it to the plate center holes (figure 6) and secure it with the cable clamps. g. Cut appropriate lengths of the supplied tie wire. Loop the wire through the anchors or lag eye bolts and the turnbuckles, then twist the wire a...

Page 4 - Specifications; General; Base plate �������������������������������� 25�8” L x 8�0” W x 1�2” D (65�5 cm L x 20�3 cm W x 2�9 cm D)

PCM 240 • Installation Guide (Continued) 4 68-1180-01 Rev D 08 12 Specifications General Maximum load capacity ������������������ 50 lbs (22�7 kg)Material ����������������������������������������� Steel plate, Tie wire: steel, 14 AWG, 70,000 psi tensile strengthDimensions Base plate ����������������...

Extron Manuals