Extron P/2 DA2 D - Manuals

Extron P/2 DA2 D – Manual in PDF format online.

Manuals:

Manual

Manual Extron P/2 DA2 D

Summary

Page 2 - Precautions; Safety Instructions • English; Extron’s Warranty

Precautions This symbol is intended to alert the user of importantoperating and maintenance (servicing) instructionsin the literature provided with the equipment. This symbol is intended to alert the user of thepresence of uninsulated dangerous voltage withinthe product's enclosure that may present ...

Page 3 - Controls and Installation; FCC Class A Notice; cables must be used with the unit to ensure compliance.

P/2 DA2 WM Series, EC, & D Controls and Installation FCC Class A Notice This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference whe...

Page 4 - Chapter 1 • Introduction; Table of Contents

P/2 DA2 WM/EC/D/AAP Series • Table of Contents P/2 DA2 WM/EC/D/AAP Series • • • • • Table of Contents Chapter 1 • Introduction ......................................................... 1-1 About the P/2 DA2 WM F/EC F, AAP andD Models .....................................................................

Page 5 - Chapter One; Introduction; Features; ii; Templates; Table of Contents, cont’d

P/2 DA2 WM/EC/D/AAP Series • Table of Contents P/2 DA2 WM/EC/D/AAP Series • • • • • Table of Contents 1 Chapter One Introduction About the P/2 DA2 WM F/ EC F, AAP, and D Models Features P/2 DA2 WM/EC/D/AAP Series ii Templates .............................................................................

Page 6 - Chapter Two; Front and Rear Panels; The; Stereo audio

P/2 DA2 WM/EC/D/AAP Series • Introduction P/2 DA2 WM/EC/D/AAP Series • Introduction 2 Chapter Two Controls and Installation Front and Rear Panels Installing the P/2 DA2 WM F/EC F Installing the P/2 DA2 D P/2 DA2 WM/EC/D/AAP Series Introduction About the P/2 DA2 WM F/EC F, AAP, and DModels The P/2 DA...

Page 7 - Unity –; P/2 DA2 WM EC F faceplate features; Front faceplate; P/2 DA2 WM F faceplate features; Audio input jack —

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation Unity – output signal level is same as that of input with no added peaking 50% – increases the output signal level and adds 50% of the maximum peaking to the signal N If the edges of the ima...

Page 8 - Controls and Installation, cont’d; Power input —; Configuration DIP switches —; au; Audio output —

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-4 2-5 Controls and Installation, cont’d P/2 DA2 WM F/EC F rear panel P/2 DA2 WM F/EC F rear connectors N Both WM F and WM EC F models have the same rearpanel connectors. 1 Power input — 12...

Page 9 - Easy setup procedure; Gain switch —; SECTION A–A; Video output —

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-6 Controls and Installation, cont’d Installing the P/2 DA2 WM F/EC F Easy setup procedure The wall-mounted P/2 DA2 WM F kit consists of the faceplate/distribution amplifier assembly and a ...

Page 10 - Power up all of the input and output devices.; Installing the mud ring bracket; Rotate all doglegs; inward; Insert the mud ring into the hole.; Standard mud rings only:; If you are going to screw the; Mod; Installing a mud ring bracket

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-8 Controls and Installation, cont’d 6 Power up all of the input and output devices. 7 The image should now display on screen. If it does not,double check steps 3 through 6 and make adjustm...

Page 11 - Connecting audio output; Unbalanced audio; Fastening captive screws; Unbalanced Output; CAUTION; Cabling; and connect the audio output cable to the 3.5 mm

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-11 Controls and Installation, cont’d Connecting audio output Before connecting audio output, determine whether your audiosystem is unbalanced or balanced. Then, follow the instructionsbelo...

Page 12 - Installing adapter plates; Balanced audio; Installing architectural adapter plates; Balanced Output

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-13 Controls and Installation, cont’d #4-40 Nut w/ CaptiveWasher P/2 DA2 WM F AAP EC(up to 3 plates) P/2 DA2 WM F AAP(up to 4 plates) Adapter Plate INPUT AUTO POWER ID PIN 4 UNITY GAIN/PEAK...

Page 13 - P/2 DA2 WM EC F Euro Channel installation; Euro Channel installation; Setting the DIP switches; — Set both pins to On if you are using the P/2 DA2; OFF; — Set both pins to Off if you are attaching a local; P/2 DA2 WM F wall mount installation; Wall mounting the P/2 DA2 WM F

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation Controls and Installation, cont’d 2-15 P/2 DA2 WM EC F Euro Channel installation Once the input and output cables have been connected andtested on the P/2 DA2 WM F EC, the distribution ampli...

Page 14 - Preparing the site and installing the wall box; Mark the guidelines for the opening on the wall.; • Connect pins 1 and 2 on both jumpers (factory default); P/2 DA2 WM F Rear View; Setting the internal jumpers

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-17 Controls and Installation, cont’d Installing the P/2 DA2 D The P/2 DA2 D is a wall-mounted product and can be mountedinto an electrical wall box. These instructions include sitepreparat...

Page 15 - Mounting the distribution amplifier to the wall box; Attaching the wall box to a wall stud; Mounting the distribution amplifier

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM/EC/D/AAP Series • Controls and Installation 2-19 Controls and Installation, cont’d 3. Mount the distribution amplifier to the wall box withmachine screws, as shown in the following illustration. Mounting the distribution amplifier to ...

Page 16 - Operation; Appendix A; Specifications; Di; Replacing the faceplate; An example of the P/2 DA2 D installation is shown below.

P/2 DA2 WM/EC/D/AAP Series • Controls and Installation P/2 DA2 WM Series, EC, & D Operation A Appendix A Specifications, Dimensions, Parts, and Templates Specifications Dimensions Parts and Accessories Templates P/2 DA2 WM/EC/D/AAP Series CO MP UT ER IN MO NIT OR OU T AU DIO IN Projector ExtronM...

Page 17 - Video; ID bits can be terminated (pins 4 and 11) via a switch setting.; Video input

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix A-3 Video output Number/signal type P/2 DA2 D ........................ 1 VGA–QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video mainoutput1 VGA–QXGA RGBHV, RGBS, RGsB,RsGsBs, HDTV component video localmonitor output P/2 DA...

Page 19 - Dimensions; All dimensions are given in inches.; P/2 DA2 WM F faceplate dimensions; WM F model faceplate dimensions; Product weight; Specifications are subject to change without notice.

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix Dimensions Dimensions of the P/2 DA2 WM F and its AAP version areprovided here for those who wish to make their owncustomized faceplates. The following diagrams are not drawnto scale. All dimensions are given in inches. P/2 ...

Page 20 - P/2 DA2 D faceplate dimensions; D model faceplate dimensions; P/2 DA2 WM F AAP faceplate dimensions; WM F AAP model faceplate dimensions

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix .0000 [0. 0 0 0 ] .000 [0. 0 0 0 ] 1.700 [4 3 .00] 2X 0.050 [ 1 .2 7 0 ] 0.155 [ 3 .9 3 7] 1.445 [ 3 6.70 3 ] 1.550 [ 3 9. 3 70] 1.600 [40 .6 4 0 ] 0. 0 0 0 [ 0 .000] 0. 0 6 0 [ 1 .524] 0. 1 0 0 [ 2 .540] 0. 2 2 5 [ 5 .715] ...

Page 21 - Optional architectural adapter plates; or; Examples of adapter plates; Parts and Accessories; Included Parts; Model; MR Series mud ring brackets; Part number; Mud ring mounting brackets

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix A-11 Optional architectural adapter plates A variety of optional adapter plates for pass-throughconnections may be ordered for the P/2 DA2 WM F AAP andP/2 DA2 WM F AAP EC. See the figure below. The WM F AAPmodel can accommod...

Page 22 - al

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix le rr a b r o t ce n n oc F21 el a me f r o t ce n n oc Fe la me f r o t ce n n oc F6 9 0- 071 0-1 1-1 2- el a me f o n o h p oe re t" s¼(2) (2) (2) (2) (1) (1) (1) (1) 1e la me f o n o h p oe re t s " ¼s la ni mr e ...

Page 23 - not; P/2 DA2 WM F mounting template; FOR FURNITURE MOUNT; TEMPLATE I; NOT; FULL

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix Templates Use these templates as a guide for cutting the hole in theinstallation surface (wall or furniture). N This templates for the P/2 DA2 WM F and the P/2 DA 2WM F AAP are not full size. Do not scale. P/2 DA2 WM F mount...

Page 24 - AREA FOR; P/2 DA2 D mounting template; t Templ; SURFACE; Please measure the printed template before cutting.; P/2 DA2 WM F AAP mounting template

P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM/EC/D/AAP Series • Appendix P/2 DA2 WM F AAP C u t-O u t Templ a te for Extron' s To install P/2 DA2directly intofurniture or wall,cut along this line. Loc a tion of P/2 DA2 W a ll Pl a te SURFACE CUT-OUT AREA FOR FURNITURE MOUNT 4.50" (11.4 3 cm) ...