Page 2 - 警告; 注 意; Extron; Korean; 항목에 대한 자세한 내용은 Extron 웹 사이트(
Safety Instructions • English WARNING : This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. ATTENTION: This symbol, , when used on the product, is intended to...
Page 3 - FCC Class A Notice; Extron Safety and Regulatory; ” on the Extron website.; Copyright; The following registered trademarks
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equ...
Page 4 - Conventions Used in this Guide; Notifications; Electrical Shock that may result in injury.; Software Commands; CE; File; Specifications Availability
Conventions Used in this Guide Notifications The following notifications are used in this guide: CAUTION: Electrical Shock that may result in injury. Use tools with care to prevent injury. ATTENTION: Attention indicates a situation that may damage or destroy the product or associated equipment. NOTE...
Page 5 - Contents; Introduction; Setting the Jumpers on New Generation; Operation; MTP AV Series • Contents
Contents Introduction .................................................... 1 About the MTP Transmitters and Receivers ........ 1TP Cable Advantages ......................................... 2Transmission Distance ........................................ 2 Installation ..................................
Page 7 - MTP AV Series • Introduction; About the MTP Transmitters and Receivers; MTPs can be configured for stereo audio output.
MTP AV Series • Introduction 1 Introduction This section introduces the MTP transmitters and receivers. Topics discussed in this section are: • About the MTP Transmitters and Receivers • TP Cable Advantages • Transmission Distance About the MTP Transmitters and Receivers The Extron MTP transmitters ...
Page 8 - TP Cable Advantages
MTP AV Series • Introduction 2 TP Cable Advantages Twisted pair (TP) cable is much smaller, lighter, more flexible, and less expensive than coaxial cable. These TP products make cable runs simpler and less cumbersome. Termination of the cable with RJ-45 connectors is simple, quick, and economical. T...
Page 9 - MTP AV Series • Installation; Installation; Signal Jumpers for Generational Compatibility; Transmitter
MTP AV Series • Installation 3 Installation This section describes the installation procedures, including: • Signal Jumpers for Generational Compatibility • Panel Features and Connections CAUTION: Installation and service must be performed by authorized personnel only. Signal Jumpers for Generationa...
Page 10 - Setting the Jumpers on New Generation Non AAP Models; Removing the MTP Cover; For the receiver; Removing the Audio Board
MTP AV Series • Installation 4 Setting the Jumpers on New Generation Non AAP Models 1. Remove and retain the four screws (two on each side of the unit) that secure the cover to the MTP (see figure 1 ). SHARP GAIN Figure 1. Removing the MTP Cover 2. For the receiver , slide the cover slightly forward...
Page 11 - Video Board Jumper Locations; Receiver Audio Board Jumper Locations
MTP AV Series • Installation 5 6. Locate the jumper blocks (see figure 3 ) on the video board. Shift the jumper to the alternate location. Transmitter Front Panel Receiver Front Panel Receiver Rear Panel TransmitterRear Panel Mono (default jumper position) Compatible with new model transmitter/recei...
Page 12 - Setting the Jumpers on AAP Transmitters; figure; Locate the jumper block (see figure
MTP AV Series • Installation 6 Setting the Jumpers on AAP Transmitters 1. Remove and retain the two screws that secure the back cover to the MTP (see figure 5 ). 12V 0.5A MAX OUTPUT POWER − + 1. Remove these Screws 2. Carefully pull the RJ-45 connector through this hole. Figure 5. Removing the MTP C...
Page 13 - Panel Features and Connections; Transmitter Input Connections; Video and Audio Input Connections; Audio input captive screw connector (MTP T SV A, MTP T AV); Unbalanced Stereo Input; Balanced Stereo Input; Captive Screw Input Connector Wiring
MTP AV Series • Installation 7 Panel Features and Connections Transmitter Input Connections Figure 8 shows all of the combinations of video and audio input connectors that you may encounter with your MTP transmitter. 12V 0.5a INPUT MTP T AV RCA OUTPUT MAX VIDEO L R INPUT L R 12V 0.5a MTP T AV OUTPUT...
Page 14 - to identify the tip, ring, and sleeve wires in various connectors.; mm Stereo Plug Connector; Typical Audio Connectors; Audio input RCA connectors (RCA and AAP models); RCA Audio Connectors
MTP AV Series • Installation 8 CAUTIONS: • The length of the exposed (stripped) portion of the copper wires is important. The ideal length is 3/16 inches (5 mm) . Longer bare wires can short together. Shorter bare wires are not as secure in the direct insertion connectors and could be pulled out. • ...
Page 15 - Transmitter and Receiver Throughput Connections; Throughput Connections; Transmitter output and receiver input connector
MTP AV Series • Installation 9 Transmitter and Receiver Throughput Connections Figure 12 identifies the connections between the transmitter and receiver. 12V 0.5A MAX OUTPUT POWER − + MTP Transmitters MTP Receivers INPUT L R MTP T AV OUTPUT VIDEO 12V 0.5a INPUT MTP T SV A RCA OUTPUT MAX 12V 0.5a MAX...
Page 16 - TP cable termination; Connector; TP Cable Termination; not recommended; Crossover Cable; A cable that is wired as T568A at one end and
MTP AV Series • Installation 10 TP cable termination Figure 13 details the recommended termination of TP cables with RJ-45 connectors in accordance with the TIA/EIA T 568A or TIA/EIA T 568B wiring standards. You can use either standard, but ensure that you use the same standard on both cable ends. A...
Page 17 - Power Connections and Indicators; Power connector; Power Connector Wiring; Signal Jumpers
MTP AV Series • Installation 11 Power Connection (All Models) See figure 14 to identify the power connections, indicators, and panel screws. MTP Transmitters MTP Receivers MTP AAP Transmitters INPUT MTP T SV A RCA OUTPUT S-VIDEO L R OUTPUT MTP R SV A RCA INPUT S-VIDEO R L 12V 0.5a MAX 12V 0.5a MAX A...
Page 18 - Power LED; Receiver Output Connections; Output Connector Wiring
MTP AV Series • Installation 12 ATTENTION: • Power supply voltage polarity is critical. Incorrect voltage polarity can damage the power supply and the MTP. Identify the power cord negative lead by the ridges on the side of the cord (see figure 15 ). • The length of the exposed (stripped) copper wire...
Page 19 - Connect a balanced; Captive Screw Connector Wiring for Audio Output; — Connect a stereo audio device to these
MTP AV Series • Installation 13 c Captive screw audio connector (MTP R SV A, MTP R AV) — Connect a balanced or unbalanced audio device, such as an audio amplifier, to this 3.5 mm, 5-pole captive screw connector (see figure 17 to properly wire the output connector). Do not tin the wires! Balanced Aud...
Page 20 - MTP AV Series • Operation; Front Panel Features; MTP Receiver Front Panels; Troubleshooting — Skew Delay Compensation
MTP AV Series • Operation 14 Operation This section describes: • Front Panel Features • Troubleshooting — Skew Delay Compensation Front Panel Features SHARP C GAIN Y GAIN SHARP GAIN MTP R S-video ReceiverFront Panel MTP R Composite VideoReceiver Front Panel 2 3 3 1 2 3 1 Figure 18. MTP Receiver Fron...
Page 21 - MTP AV Series • Reference Information; Reference; Mounting Options; UL Requirements; Elevated operating ambient
MTP AV Series • Reference Information 15 Reference Information This section provides information on: • Mounting Options Mounting Options NOTE: For rack, furniture, or projector mount installation, see the instructions provided with the kit. UL Requirements The following Underwriters Laboratories (UL...
Page 22 - AAP Accessories
MTP AV Series • Reference Information 16 Frame Mounting (AAP Models) The MTP T AV AAP transmitters can be mounted to any Extron AAP mounting frame that accepts a double space (double height) AAP module (see “ AAP Accessories ” on page 15 for a partial list of AAP devices). NOTE: The rear panel MTP c...
Page 23 - Contact Information; USA; xtron
Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +1.919.850.1001 FAX Extron Europe +800.3987.6673 (Inside Europe Only) +31.33.453.4040 +31.33.453.4050 FAX Extron Asia 800.3987.6673 (Inside Asia Only)+6...