Page 2 - Precautions; FCC Class A Notice; Extron’s Warranty
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may pres...
Page 3 - 注意
安全须知 • 中文 这个符号提示用户该设备用户手册中有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压,有触电危险。 注意 阅读说明书 • 用 户 使 用 该 设 备 前 必 须 阅 读 并 理 解 所 有 安 全 和 使 用 说 明 。 保存说明书 • 用户应保存安全说明书以备将来使 用。 遵守警告 • 用户应遵守产品和用户指南上的所有安 全和操作说明。 避免追加 • 不要使用该产品厂商没有推荐的工具或 追加设备,以避免危险。 警告 电源 • 该 设 备 只 能 使 用 产 品 上 标 明 的 电 源 。 设 备 必 须 使 用 有 地 线 的 供 电 系 统 供 电 ...
Page 4 - MSW 4V SDI rs • Quick Start Guide; Quick Start Guide — MSW 4V SDI rs; Installation; Extron
MSW 4V SDI rs • Quick Start Guide QS-1 Quick Start Guide — MSW 4V SDI rs Installation Step 1 Turn all of the equipment off and disconnect it from the power source. Step 2 Select your mounting option, install the appropriate brackets and mount the MSW. Otherwise, install the four rubber feet (include...
Page 5 - Quick Start Guide — MSW 4V SDI rs, cont’d; MSW 4V SDI rs • Table of Contents; Operation — Connecting an input to the; Table of Contents; Chapter One • Introduction
MSW 4V SDI rs • Quick Start Guide Quick Start Guide — MSW 4V SDI rs, cont’d QS-2 TOC-i MSW 4V SDI rs • Table of Contents Step 6 Power up the input and output devices, then connect power to the MSW. Turn on the mini SDI switcher by connecting the external power supply. See the appropriate chapters in...
Page 6 - Table of Contents, cont’d; MSW 4V SDI rs; Chapter One; Introduction; Features; Appendix A • Specifications, Part Numbers, and; Specifications
TOC-ii MSW 4V SDI rs • Table of Contents Table of Contents, cont’d MSW 4V SDI rs 1 Chapter One Introduction About.this.Manual Features Appendix A • Specifications, Part Numbers, and Accessories .........................................................................................A-1 Specification...
Page 7 - MSW 4V SDI rs • Introduction; About this Manual
MSW 4V SDI rs • Introduction Introduction MSW 4V SDI rs • Introduction 1-2 1-3 About this Manual The Extron MSW 4V SDI is a four-input, two parallel output, mini SDI (serial digital interface) switcher (MSW). The MSW is a member of the Extron VersaTools ® line of basic distribution amplifiers, switc...
Page 8 - Chapter Two; Installation and Operation
Introduction, cont’d 1-4 MSW 4V SDI rs • Introduction MSW 4V SDI rs 2 Chapter Two Installation and Operation Installation Rear.Panel.Connections Front.Panel.Controls.and.Indicators
Page 9 - MSW 4V SDI rs • Installation and Operation; Rack mounting; UL requirements
MSW 4V SDI rs • Installation and Operation Installation and Operation MSW 4V SDI rs • Installation and Operation 2-2 2-3 Installation The 1U high, quarter rack width MSW 4V SDI rs can be mounted on a rack shelf, under a desk, or on a tabletop. Rack mounting For optional rack mounting, mount the MSW ...
Page 10 - Installation and Operation, cont’d; Furniture mounting; Rear Panel Connections
MSW 4V SDI rs • Installation and Operation Installation and Operation, cont’d 2-4 MSW 4V SDI rs • Installation and Operation 2-5 Furniture mounting Furniture mount the MSW using the optional MBU 123 VersaTools under-desk mounting kit (part #70-212-01) as follows:1 . If necessary, remove the feet fro...
Page 11 - Contact connector
MSW 4V SDI rs • Installation and Operation Installation and Operation, cont’d 2-6 MSW 4V SDI rs • Installation and Operation 2-7 See chapter 3, “Serial Communication” for Simple Instruction Set (SIS) commands to communicate with the MSW 4V SDI rs via RS-232. d Contact connector — Connect a remote co...
Page 12 - Front Panel Controls and Indicators; Input selection; on; off
MSW 4V SDI rs • Installation and Operation Installation and Operation, cont’d 2-8 MSW 4V SDI rs • Installation and Operation 2-9 Front Panel Controls and Indicators Figure 2-7 shows the front panels of the MSW 4V SDI rs. A/V SWITCHER MODE NORMAL AUTO AUTO SWITCH 1 2 3 4 6 2 1 5 4 3 Figure 2-7 — MSW ...
Page 13 - Chapter Three; Serial Communication
MSW 4V SDI rs • Installation and Operation Installation and Operation, cont’d 2-10 MSW 4V SDI rs 3 Chapter Three Serial Communication Using.Simple.Instruction.Set.(SIS TM ).Control Windows-based.Control.Program Updating.the.Firmware
Page 14 - MSW 4V SDI rs • Serial Communication; Using Simple Instruction Set (SIS; Switcher-initiated messages
MSW 4V SDI rs • Serial Communication Serial Communication MSW 4V SDI rs • Serial Communication 3-2 3-3 Using Simple Instruction Set (SIS TM ) Control Host-to-switcher communications The Extron Simple Instruction Set (SIS) commands consist of one or more characters per field. No special characters ar...
Page 15 - Serial Communication, cont’d; Using the command/response table; Symbol definitions; Command; esponse table for Simple Instruction Set (SIS) commands
MSW 4V SDI rs • Serial Communication Serial Communication, cont’d 3-4 MSW 4V SDI rs • Serial Communication 3-5 Using the command/response table The Command/response table for Simple Instruction Set (SIS) commands is shown at right. The symbols used throughout the table represent variables in the com...
Page 16 - Windows-Based Control Program; Installing the software; Using the software; Control Program
MSW 4V SDI rs • Serial Communication Serial Communication, cont’d 3-6 MSW 4V SDI rs • Serial Communication 3-7 Windows-Based Control Program The Universal Switcher Control Program (part #29-031-01), is compatible with Windows 2000 and Windows XP or later, and it provides remote control of input sele...
Page 17 - Updating the Firmware; Using the control program to update the firmware
MSW 4V SDI rs • Serial Communication Serial Communication, cont’d 3-8 MSW 4V SDI rs • Serial Communication 3-9 Updating the Firmware Extron periodically updates product firmware in conjunction with the release of new software revisions. When updating any Extron software to the latest revision level,...
Page 18 - Appendix A; and Accessories; Exit; Using the help system
MSW 4V SDI rs • Serial Communication Serial Communication, cont’d 3-10 MSW 4V SDI rs A Appendix A Specifications, Part Numbers, and Accessories Specifications Parts 8 . A status bar, showing the progress of the upload appears in the Firmware Loader window. The firmware upload to the switcher may tak...
Page 20 - Specifications, Part Numbers, and Accessories; MSW 4V SDI rs • Specifications, Part Numbers, Accessories; General; Specifications are subject to change without notice.; Parts; Included parts; Optional accessories; Accessories
Specifications, Part Numbers, and Accessories MSW 4V SDI rs • Specifications, Part Numbers, Accessories MSW 4V SDI rs • Specifications, Part Numbers, Accessories A-4 A-5 Contact closure .............................. (1) 3.5 mm captive screw connector, 5 poleContact closure pin configurations 1 = in...