Page 2 - Precautions; Safety Instructions • English
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may pres...
Page 3 - 注意; FCC Class A Notice
安全须知 • 中文 这个符号提示用户该设备用户手册中有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压,有触电危险。 注意 阅读说明书 • 用 户 使 用 该 设 备 前 必 须 阅 读 并 理 解 所 有 安 全 和 使 用 说 明 。 保存说明书 • 用户应保存安全说明书以备将来使 用。 遵守警告 • 用户应遵守产品和用户指南上的所有安 全和操作说明。 避免追加 • 不要使用该产品厂商没有推荐的工具或 追加设备,以避免危险。 警告 电源 • 该 设 备 只 能 使 用 产 品 上 标 明 的 电 源 。 设 备 必 须 使 用 有 地 线 的 供 电 系 统 供 电 ...
Page 5 - IPL T S Series Interfaces • Table of Contents; Table of Contents; Chapter One • Introduction
i IPL T S Series Interfaces • Table of Contents Table of Contents Chapter One • Introduction ................................................... 1-1 About this Manual .................................................................... 1-2 IPL T S Series Products .......................................
Page 6 - Table of Contents, cont’d; Launching the GlobalViewer Interface
ii IPL T S Series Interfaces • Table of Contents Table of Contents, cont’d All trademarks mentioned in this manual are the properties of their respective owners. Launching the GlobalViewer Interface ............................ 3-22 Step fourteen: launch GlobalViewer ...................................
Page 7 - IPL T S Series Interfaces; Chapter One; Introduction; About this Manual
IPL T S Series Interfaces 1 Chapter One Introduction About this Manual IPL T S Series Products Global Configurator
Page 8 - IPL T S Series Interfaces • Introduction; The Extron IPL T S Series interface boxes can be installed as; Typical IPL T S Series Interface application
IPL T S Series Interfaces • Introduction Introduction 1-2 About this Manual This setup guide describes the: • IPL T S Series products• Global Configurator application• IPL T S Series hardware installation• IPL T S Series software configuration IPL T S Series Products The Extron IPL T S Series interf...
Page 9 - IPL T S1
IPL T S Series Interfaces • Introduction 1-3 IPL T S1 12 VDC power supply • RJ-45 Ethernet receptacle • 9-pin D RS-232 serial port • IPL T S2 12 VDC power supply • RJ-45 Ethernet receptacle • Two 9-pin D RS-232, RS-422, • or RS-485 serial ports - or - Two 3.5 mm captive screw • RS-232, RS-422, or RS...
Page 10 - Global Configurator; Global Configurator application screen
IPL T S Series Interfaces • Introduction Introduction, cont’d 1-4 Global Configurator Global Configurator (GC) is a software application that gives users the ability to create a single configuration file of all the controlled devices on their audio/video (A/V) network.There are two types of devices ...
Page 11 - Use Global Configurator version 2.2 or later.; System requirements; If ActiveX is not enabled, you may get a prompt from the; Installing Global Configurator
IPL T S Series Interfaces • Introduction 1-5 Using GC you can configure a single room controller, or create a web-based remote monitoring system for hundreds of A/V devices in multiple locations. You may configure an IPL T S Series interface using GC without having the device physically connected to...
Page 12 - Software
IPL T S Series Interfaces • Introduction Introduction, cont’d 1-6 1 . Insert the Extron Software Products CD into your drive. 2 . Wait for the Extron Software Products page to load. 3 . Click on the Software icon. 4 . Scroll down to the Global Configurator description and click the Install link in t...
Page 13 - Chapter Two; Hardware Setup; Front Panel
IPL T S Series Interfaces 2 Chapter Two Hardware Setup Front Panel Rear Panel Power Connection Local Area Network (LAN) Connection Serial Device Connection
Page 14 - IPL T S Series Interfaces • Hardware Setup
IPL T S Series Interfaces • Hardware Setup Hardware Setup 2-2 a Power LED — green when power is on b Reset button — recessed multiple function reset button c TX LED — green when data is being transmitted d RX LED — green when data is being received e RTS LED — green when ready to send data f CTS LED...
Page 15 - Rear Panel
IPL T S Series Interfaces • Hardware Setup 2-3 a Power receptacle — connects the supplied 12 VDC power supply b LAN Activity LED — yellow LED blinks when sending and receiving data c LAN receptacle — RJ-45 receptacle for network connection d Link LED — green when connected to a network e Captive scr...
Page 16 - Hardware Setup, cont’d; crossover
IPL T S Series Interfaces • Hardware Setup Hardware Setup, cont’d 2-4 Power Connection To connect the power supply: 1 . Insert the 2-pole captive screw connector into the power supply receptacle on the rear panel of the interface. 2 . Connect the female end of the power supply AC cord into the power...
Page 17 - Pinouts for the two types of Ethernet cables are shown below:; Serial Device Connection; Straight-through Cable
IPL T S Series Interfaces • Hardware Setup 2-5 Pinouts for the two types of Ethernet cables are shown below: N The diagram is representative of both the patch (straight-through) and the crossover cable. Both types of cables have twisted pairs of conductors inside the sheath. Serial Device Connection...
Page 18 - Pin; Captive screw connector
IPL T S Series Interfaces • Hardware Setup Hardware Setup, cont’d 2-6 9-pin D connector Connect any audio/video device using a serial cable with a 9-pin D connector to any one of the COM ports on the rear panel of an IPL T S Series interface. COM1 LAN 00-05-A6-00-00-02 POWER 12V .5A MAX COM1 TX RX T...
Page 21 - Chapter Three; Software Setup; Creating a Global Configurator Project File
IPL T S Series Interfaces 3 Chapter Three Software Setup Creating a Global Configurator Project File Configuring a New Device Building and Uploading a GC File Launching the GlobalViewer ® Interface
Page 22 - IPL T S Series Interfaces • Software Setup; Step one: download device drivers; or; GC
IPL T S Series Interfaces • Software Setup Software Setup 3-2 Creating a Global Configurator Project File After you have installed the Global Configurator (GC) application on your PC, follow the steps in this chapter to download device drivers, create a GC project file, configure your IPL T S Series...
Page 23 - Download
IPL T S Series Interfaces • Software Setup 3-3 5 . Click the right arrow (Subscribe) button. 6 . Repeat steps 3 through 5 for each type of device you plan to add to your audio/video network. 7 . Click the Download button. The Download Complete dialog box opens. 8 . Click the Close button. 9 . Click ...
Page 24 - Software Setup, cont’d; Step two: create a new project; To create a new Global Configurator project file:; Create a New Project; Click; OK
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-4 Step two: create a new project To create a new Global Configurator project file: 1 . Click File > New . The Start Options dialog box opens. 2 . Select Create a New Project . 3 . Click OK . The Project Settings dialog box opens ...
Page 25 - Enter the IP address of the first device you will add to your
IPL T S Series Interfaces • Software Setup 3-5 4 . Enter the IP address of the first device you will add to your GC project file in the Next Assigned IP Address field. 5 . Make the desired date/time selections. 6 . Click OK . The Add Device dialog box opens.
Page 26 - Step three: add a device; Add Device
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-6 Step three: add a device There are four ways to launch the Add Device dialog box: • Press Ctrl+A on the keyboard• Click Edit > Add Device... • Click the Add Device icon • When you select Create a Project in the Start Options di...
Page 27 - Auto Configure IP Address
IPL T S Series Interfaces • Software Setup 3-7 6 . If the device you are adding is password protected, enter the appropriate admin and user passwords. (The default condition is no admin or user password.) 7 . Click Auto Configure IP Address . 8 . Enter the device’s MAC address (found on a label on t...
Page 28 - Step four: define the location of the new device; New Location
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-8 Step four: define the location of the new device Global Configurator allows you to keep track of the devices on your audio/video network by creating a custom tree of folders in which you can place and organize your audio/video dev...
Page 29 - Step five: save the new Global Configurator file; Save
IPL T S Series Interfaces • Software Setup 3-9 Step five: save the new Global Configurator file To save the new GC project file: 1 . Click File > Save - or - click the Save icon. If the file has not previously been saved, the Save As dialog box opens. 2 . Enter a unique name in the Project Name f...
Page 30 - Step six: configure contacts; The Contact Manager dialog box is used to enter the name,; Add
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-10 Configuring a New Device Step six: configure contacts The Contact Manager dialog box is used to enter the name, e-mail address, and company name of the network’s contacts.To configure contacts: 1 . Click Edit > Contact Manager...
Page 31 - The Email Manager dialog box is used to create custom e-mails
IPL T S Series Interfaces • Software Setup 3-11 Step seven: configure e-mail The Email Manager dialog box is used to create custom e-mails that are delivered as directed by the settings in the GC Schedule and Monitor dialog boxes. To create custom e-mails: 1 . Click Edit > Email Manager... 2 . Co...
Page 32 - Step eight: assign device drivers; Driver Configuration
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-12 Step eight: assign device drivers The Driver Configuration tab of Global Configurator allows you to assign a device driver to each serial port of the device. To assign a device driver: 1 . Select a serial port in the IP Link Tree...
Page 33 - Step nine: set scheduled actions and e-mail; Schedule
IPL T S Series Interfaces • Software Setup 3-13 Step nine: set scheduled actions and e-mail deliveries The Schedule tab is used to set scheduled actions and e-mail deliveries. A single schedule can include both actions and e-mail assignments. To schedule an action: 1 . Click the Schedule tab. 2 . Cl...
Page 34 - Enter a unique schedule name.; Next; Actions; Apply Action
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-14 3 . Enter a unique schedule name. 4 . Select the schedule times. 5 . Click Next . 6 . Click Actions . 7 . Select a subject port (device). 8 . Select an available option (action). 9 . Click Apply Action .
Page 36 - Contact Manager
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-16 The Add an Email window opens in the right pane. 6 . Select an e-mail message. 7 . Select a recipient (Contact). 8 . Click Apply Email/Contacts . The new e-mail and recipient is now displayed in the left pane. 9 . Click the Conta...
Page 37 - Step ten: set monitored conditions; Monitor
IPL T S Series Interfaces • Software Setup 3-17 Step ten: set monitored conditions The Monitor tab is used to respond with an action or e-mail to a specified condition or event. Actions vary by selected device, and include options such as Enable/Disable PINs, Lockout Front Panel, Time Delay, etc. Cu...
Page 39 - Building and Uploading a GC File; Step eleven: build the Global Configurator file; • Build All Configurations
IPL T S Series Interfaces • Software Setup 3-19 12. Click Next again to add an e-mail notification. 13. Select an e-mail message and contacts, and click Apply Email/Contacts . 14. Click Done . The dialog box closes. Building and Uploading a GC File Before a Global Configuration (GC) file is active i...
Page 40 - Step twelve: upload the Global Configurator file; Click the; Begin; When the upload process completes, the Progress and Status; Test GV System; button to view the GlobalViewer
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-20 Step twelve: upload the Global Configurator file When the build process completes, the Upload dialog box opens. 1 . Click the Begin button. When the upload process completes, the Progress and Status fields are updated to indicate...
Page 41 - If for any reason you need to change any of the previously; Tools > Change Device Settings; Settings; to open the Settings drop-down listing.; Set; in the drop-down listing to
IPL T S Series Interfaces • Software Setup 3-21 Step thirteen: change device settings (if desired) If for any reason you need to change any of the previously configured settings: 1 . Click Tools > Change Device Settings . 2 . Select a device. 3 . Click Settings to open the Settings drop-down list...
Page 42 - Step fourteen: launch GlobalViewer
IPL T S Series Interfaces • Software Setup Software Setup, cont’d 3-22 Launching the GlobalViewer Interface GlobalViewer is a graphical user interface that is generated by Global Configurator (GC). When a GC file is built and uploaded to a GlobalViewer host device, you can launch the GlobalViewer in...
Page 44 - Extron’s Warranty
Extron’s Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will,...
Page 45 - Chapter 1; Setup Guide Checklist
© 2008 Extron Electronics. All rights reserved. Extron USA - West Headquarters +800.633.9876 Inside USA / Canada Only +1.714.491.1500 +1.714.491.1517 FA X Extron USA - East +800.633.9876 Inside USA / Canada Only +1.919.863.1794 +1.919.863.1797 FA X Extron Europe +800.3987.6673 Inside Europe Only +31...