Extron FF 220T - Manuals

Extron FF 220T – Manual in PDF format online.

Manuals:

Manual Extron FF 220T

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Amplifier; Cable Clamp Adapter; Using apeaker wires without a conduit:

2 5. Route the cables through the cover plate — Using a flexible conduit: a. Route the wires through the conduit. b. Insert the conduit into the cover plate opening using an appropriate conduit adapter, and secure the conduit to the plate, as shown below. c. Pull the wires out of the conduit and thr...

Page 3 - Connect wires from the transformer to the speaker.; Direct Connection; From Amplifier; From Amplifier; Red Wire; To Second Speaker; Two Speakers; Wiring to a Single Speaker; Wiring to Multiple Speakers; Red Wires

3 c. Strip 3/16” (5 mm) from the wire ends and keep the wire end strands together by twisting them. Do not tin the wires. d. Secure the wires to the appropriate taps on the captive screw connectors of the 7-connector terminal block (on the transformer side of the cover plate) as indicated on the tap...

Page 4 - DO NOT allow any slack in these support cables.; Bend Up Tab; for further details.; Repeated bending of the tab

4 68-1683-50 Rev. C 08 13 10. Replace the transformer cover plate and tighten the two cover plate screws that were loosened in step 4 . 11. Set the speaker on top of a T-rail making sure to hide the edges behind the grid rail. ExistingCeiling TileRails T-rail Crosspiece(supplied) Ceiling Tile Extron...

Extron Manuals