Extron ECP 1000 - Manuals

ECP 1000 • Installation ECP 1000 • Installation Installation, cont’d 2-3 5 Continue the procedure for installing the SGS 408. 6 Attach power cords and plug the SGS 408 seamlessswitcher, ECP 1000 event control panel, input devices, andoutput devices into a grounded AC source. 7 Select an input from t...

ECP 1000 • Installation Installation, cont’d ECP 1000 Event Control Panel 3 Chapter Three Operation Top Panel Controls Power-up Using the Menus Applying a Switch 2-4

ECP 1000 • Operation ECP 1000 • Operation Operation, cont’d In the display of attached screens, a dot represents ascreen that is not attached. Using the Menus The ECP 1000 menus allow you to do the following: • Change the backlight intensity (see below). • Perform a system reset (see page 3-5). • Pr...

ECP 1000 • Operation ECP 1000 • Operation Operation, cont’d Figure 3-5 — Programming the ECP 1000 2. Press the Next button. The Program Ready menuappears. 3. Do one of the following:• To program the ECP 1000, use the SGS 408 ControlProgram. See chapter 4 for information. When youare finished using t...

ECP 1000 • Operation ECP 1000 • Operation Operation, cont’d When the either title effect ends, the preview image disappears,and the program image is again intact. To apply a title, do the following: 1. Press the Title button. 2. Press the screen selection buttons that correspond to thescreens you wa...

ECP 1000 • Operation ECP 1000 • Operation Operation, cont’d Figure 3-11 — Square wipe effects Applying a wipe To apply a wipe, do the following: 1. Press the effect button that is programmed to perform thewipe you want. 2. If this is the first time any effect has been selected since theECP 1000 was ...

ECP 1000 • Operation Operation, cont’d ECP 1000 Event Control Panel 4 Chapter Four Control Software for Windows Installing the Software Starting the Software 3-12

ECP 1000 • Control Software for Windows ECP 1000 • Control Software for Windows Control Software for Windows, cont’d Control Software for Windows The SGS 408 Control Program (Extron part number 29-049-01) ,which is used to configure the ECP 1000, is compatible withWindows 95/98 and Windows NT. It al...

ECP 1000 • Control Software for Windows Control Software for Windows, cont’d ECP 1000 Event Control Panel A Appendix Reference Information Maintenance and Upgrades Specifications Part Numbers 4-4

ECP 1000 • Reference Information ECP 1000 • Reference Information Reference Information, cont’d A-3 Reference Information A-2 Maintenance and Upgrades You can perform the following maintenance operations andupgrades to the ECP 1000: • Cleaning the fan filter • Installing a firmware update You can al...

ECP 1000 • Reference Information ECP 1000 • Reference Information Reference Information, cont’d A-4 Screwdriver TEXT A-5 Separate board and cover without straining the internal wire connectors. Remove 11screws Align Notches U9 U11 ECP 1000 E V E N T C O N T R O L P A N E L S C R E E N A D J U S T 5....

ECP 1000 • Reference Information Reference Information, cont’d A-6 Enclosure dimensions ................. 4.6" H x 13.1" W x 7.0" D 11.7 cm H x 33.3 cm W x 17.8 cm D(T-bar control adds up to 1.8” ((4.6 cm)) toheight.) Product weight ............................. 4.4 lbs (2.0 kg)Shipping ...

Precautions This symbol is intended to alert the user of importantoperating and maintenance (servicing) instructionsin the literature provided with the equipment. This symbol is intended to alert the user of thepresence of uninsulated dangerous voltage withinthe product's enclosure that may present ...