Page 2 - IR Broadcaster with Emitter Port • Introduction; Introduction; The IR Broadcaster; Front and rear panels; Installing and Setting Up the IR Broadcaster
IR BROADCASTER Emitter Comm. Responder LED Broadcast Emitters Front Rear 2 IR Broadcaster with Emitter Port • Introduction Introduction The IR Broadcaster (part #60-272-02) The Extron Infrared Broadcaster transmits IR signals that have been“learned” by an Extron system switcher or Extron MediaLinkCo...
Page 3 - Extron System 7SC; Connecting an IR Broadcaster, IR Emitter, and a system switcher; Using a signal with a carrier signal; ON; Top View
IR Broadcaster with Emitter Port • Installation & Operation White = Signal Black = Ground IR Emitter Tip (Signal) Sleeve (Gnd) SYSTEM 7SC COMPUTER S-VIDEO L R VIDEO AUDIO S-VIDEO L R VIDEO INPUT 7 CONTROL IR DISPLAY VOLUME RX LEARN TXRX ADJUST DETAIL NEXT CONT MENU BRIGHT TINT COLOR DISPPWR DISP...
Page 4 - IR Broadcaster with Emitter Port • Installation & Operation; Installation and Operation, cont’d
IR Broadcaster with Emitter Port • Installation & Operation Installation and Operation, cont’d 4 Freq. (kHz) 13,400.00 6,700.004,466.703,350.003,350.002,680.002,233.30 1,675.00 1,914.30 1,675.00 Closed = up, Open = down, DIP Switch Settings for IR Broadcaster-Generated Carrier Frequencies (DIP s...
Page 5 - Making the Cable
IR Broadcaster with Emitter Port • Installation & Operation 5 Freq. (kHz) 110.70109.80108.90108.10108.08107.20106.30 104.70 105.50 104.70 Closed = up, Open = down, 1 2 3 4 5 6 7 101.53 98.5395.7393.0590.5588.1585.90 81.70 83.75 79.7577.9076.13 72.83 74.45 71.28 63.2062.03 59.83 60.90 58.7857.75 ...
Page 6 - Installation and Operation; The contact assignments for the connector are as follows:; cr; CAUTION
IR Broadcaster with Emitter Port • Installation & Operation Installation and Operation 6 Wiring tip-ring-sleeve and tip-sleeve connectors The illustration below shows how to wire a 3.5 mm stereo-style (tip-ring-sleeve) connector for the IR Broadcaster voltage, signal, and groundwires to connect ...
Page 7 - IR Broadcaster with Emitter Port • Installation and Operation; Wiring the System 5/5cr/5cr Plus’ captive screw connector; Wiring the System 7SC’s captive screw connector; IR; Wiring the MLC’s one-piece captive screw connector
7 IR Broadcaster with Emitter Port • Installation and Operation 7 1/4” (0.6 cm) of insulation from each wire. Do not solder the tips. Inserteach wire into the correct position on the captive screw connector, andtighten each screw. See the diagrams below. To pass through an IR signal that includes a ...
Page 8 - Extron’s Warranty
Extron Electronics, USA 1230 South Lewis StreetAnaheim, CA 92805USA714.491.1500 Fax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C3821 AH AmersfoortThe Netherlands+31.33.453.4040 Fax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Road, #04-01PM Industrial BuildingSingapore 368363+6...