Exmark Lazer Z AS - Manuals

Exmark Lazer Z AS – Manual in PDF format online.

Manuals:

Manual

Manual Exmark Lazer Z AS

Summary

Page 3 - Introduction; CONGRATULATIONS

Introduction CONGRATULATIONS on the purchase of your Exmark Ultra Vac. This product has been carefullydesigned and manufactured to give you a maximumamount of dependability and years of trouble-freeoperation. This manual contains operating, maintenance,adjustment, and safety instructions for your Ex...

Page 4 - Contents

Contents Introduction ........................................................... 3Safety ..................................................................... 5 Safety Alert Symbol ......................................... 5Safe Operating Practices .................................. 5Safety and Ins...

Page 5 - Safety; Safety Alert Symbol; Safe Operating Practices; Training; CAUTION; Operation

Safety Safety Safety Alert Symbol This Safety Alert Symbol (Figure 2) is used both inthis manual and on the machine to identify importantsafety messages which must be followed to avoidaccidents This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Figure 2 1. Safety alert symbol The s...

Page 6 - Slope Operation; Extreme; DANGER; Do Not mow slopes when grass is wet.

Safety DANGER There are rotating blades in the blower andunder the mower deck. Blade contact cancause serious operator or bystander injuryor even death. • Do Not reach into blower unless rotationindicator has stopped. Disengage PTO,stop engine, remove key, wait for allmoving parts to stop. engage pa...

Page 7 - Maintenance and Storage

Safety • Remove or mark obstacles such as rocks, treelimbs, etc. from the mowing area. Tall grass canhide obstacles. • Watch for ditches, holes, rocks, dips and rises thatchange the operating angle, as rough terrain couldoverturn the machine. • Avoid sudden starts when mowing uphill becausethe mower...

Page 8 - Safety and Instructional Decals

Safety Safety and Instructional Decals • Keep all safety signs legible. Remove all grease,dirt and debris from safety signs and instructionallabels. • Replace all worn, damaged, or missing safetysigns. • When replacement components are installed, besure that current safety signs are affixed to there...

Page 10 - Specifications; Model Numbers; Systems; Bagging System; Dimensions

Specifications Specifications Model Numbers Serial Nos: 720,000 and Higher LZUV52–Fits Lazer Z and Lazer Z AS with 52 inch deck. UV60–Fits Lazer Z, Lazer Z XP, Lazer Z XS, and Lazer Z AS with 60 inch deck. UV6672–Fits Lazer Z, Lazer Z XP, Lazer Z XS, and Lazer Z AS with 66 inch or 72 inch deck. Syst...

Page 11 - Torque Requirements; Product Overview

Product Overview Curb Weight: w/Ultra Vac 52 inch Deck-All 254 lb (115 kg) 60 inch Deck-SN 599,999and Lower & All Lazer AS 324 lb (147 kg) 60 inch Deck-SN 600,000and Higher Air-Cooled(except AS) 243 lb (110 kg) 60 inch Deck-SN 600,000and Higher Liquid-Cooled 261 lb (118 kg) 66 inch Deck-AllAir-C...

Page 12 - WARNING; Mowing

Operation Operation Note: Determine the left and right sides of the machine from the normal operating position. Pre-Start Make sure you understand the controls, theirlocations, their functions, and their safetyrequirements. Ensure the blower, belt cover, bags, tube and hoodare in good condition, pro...

Page 14 - Bagger Installation for Bagging; The

Operation Note: The removable weights are heavy. Use care when lifting them. Make sure that you canhold them securely before lifting them. Usecaution when positioning your hands so that youDo Not set them down on your hands or fingers. Note: The portions of the Ultra Vac bagger that are not bolted t...

Page 15 - Units with removable floorpan weight:; Transporting; Transporting a Unit

Operation Figure 7 1. Clevis Pin 2. Hairpin 11. Units with removable floorpan weight: Tighten knob on weight assembly until the weightis clamped securely to the caster arm. 12. Hook weight plate assembly over the top of the weight mounting plates and secure with twohairpins as shown in Figure 8). Fi...

Page 16 - Loading a Unit; Do Not attempt to turn the unit

Operation WARNING Loading a unit on a trailer or truck increasesthe possibility of backward tip-over.Backward tip-over could cause serious injuryor death. • Use extreme caution when operating aunit on a ramp. • Use only a single, full width ramp; DoNot use individual ramps for each sideof the unit. ...

Page 17 - Maintenance; Periodic Maintenance; Service Interval: Before each use or daily; Check Bags; Service Interval: Before each use or daily

Maintenance Maintenance Note: Determine the left and right sides of the machine from the normal operating position. WARNING While maintenance or adjustments are beingmade, someone could start the engine.Accidental starting of the engine couldseriously injure you or other bystanders. Remove the key f...

Page 18 - Lubricate Grease Fittings; See chart for service intervals.; Check Condition of Belt; Service Interval: Every 50 hours

Maintenance Lubricate Grease Fittings Note: See chart for service intervals. 1. Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake. 2. Lubricate fittings with NGLI grade #2 multi-purpose gun grease. Refer to the following chart for fitting locationsand lubrication s...

Page 19 - Cleaning; Clean Blower; Service Interval: Yearly or before storage

Maintenance Cleaning Clean Muffler and RearFrame Area Service Interval: Before each use or daily Stop engine, wait for all moving parts to stop, andremove key. Engage parking brake. WARNING Operating engine parts, especially themuffler, become extremely hot. Severe burnscan occur on contact and debr...

Page 20 - Troubleshooting; condition prior to mower use.

Troubleshooting Troubleshooting Important: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use. When a problem occurs, Do Not overlook the simple causes. For example: starting problems could becaused by an empty fuel tank. The followi...

Page 22 - Service Record

Service Record Date: Description of Work Done: Service Done By: 22

Page 24 - M I D - M O U N T R I D I N G AC C E S S O R I E S; SEE EXMARK’S COMPLETE LINE OF ACCESSORIES; WALK-BEHIND ACCESSORIES

M I D - M O U N T R I D I N G AC C E S S O R I E S SEE EXMARK’S COMPLETE LINE OF ACCESSORIES WALK-BEHIND ACCESSORIES GRASS CATCHER LAZERLOCKER MICRO-MULCH SYSTEM TURF STRIPER STANDON CUSTOM RIDE SEAT SUSPENSION SYSTEM DECK LIFT ASSIST KIT HITCH KIT LAZERLOCKER LIGHT KIT MICRO-MULCH SYSTEM OPERATOR C...