EVGA 630i - Manuals - manualsarea.com

Page 3 - Safety Instructions

Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: • Preparing the motherboard • Installing the CPU • Installing the CPU fan • Installing the memory • Installing the motherboard • Connecting cables and setting switch...

Page 4 - Figure; therboard L; Layout

1. 2. 3. 4. 5. 6. 7. 8. 9. 10 11 10 CPU Socket NVIDIA MCP with 4-Pin CPU Fan CoDDR2 DIMM MemFDD Connector 24-Pin ATX PowerIDE HDD ConnectSATA Ports Front Panel Heade 9 12 Figure Passive Cooling nnector mory Slots r Connector tor er 8 12 13 18 19 e 1. e-7010 Note: Actual m 10. USB 11. Fron12. PCI S13...

Page 5 - Figu; sis Back Pa

1. PS/2. LAN 3. PS/4. e-75. USB6. Aud GrePin OraBlaGre /2 Keyboard PoN Port with LED /2 Mouse Port 7050 Integrated B 2.0 ports (Fo dio Port 2-C een Lin k Mic ange ck ey 1 3 ort Ds to indicate s d Graphics VGA our) Channel ne-Out c In Figu Activity LED Status Off Blinking (Green) status: A Output 6-C...

Page 6 - Preparing the Motherboard; Installing the CPU; Unhook the socket lever by pushing; Installing the CPU heat sink/fan; Unlock a DIMM slot by pressing the module clips outward.

Preparing the Motherboard Installing the CPU Be very careful when handling the CPU. Hold the processor only by the edges and do not touch the bottom of the processor. Use the following procedure to install the CPU onto the motherboard. 1. Unhook the socket lever by pushing down and away from the soc...

Page 7 - Installing the Motherboard; Installing the I/O Shield; inside; Securing the Motherboard into a System Case; Align the mounting holes with the studs/spacers.

Installing the Motherboard The sequence of installing the motherboard into the chassis depends on the chassis you are using and if you are replacing an existing motherboard or working with an empty chassis. Determine if it would be easier to make all the connections prior to this step or to secure t...

Page 9 - Note

Co Tco Co PlL USB onnecting S The Serial AATA II devthe thin Securrent Sertransfer rat There are four onnectors sup onnecting I lease refer to ayout for the Front Pan The front pconnect th PWRL Attachindicat PWRS Attachon the HD_LE AttachLED in RESET Attachsystem Note : the nam B Headers The...

Page 10 - Front Audio Connector; Fan Connections; section of the CMOS Setup. Both fans are

Audio The audio connector supports the HD audio standard. Most cases come with a 10 pin standard block which will align and plug directly in to the header. In some cases there will be individual plugs which will need to be plugged in. Table 1. Front Audio Connector Connector Pin Signal Front Audio C...

Page 11 - Expansion Slots; PCI Slots; Install your Operating System

Expansion Slots The EVGA nForce motherboard contains four expansion slots, two PCI Express slots and two PCI slots. PCI Slots The two PCI slots support many expansion cards such as a LAN card, USB card, SCSI card and other cards that comply with PCI specifications. When installing a card into the PC...