EVGA 200-LM-1700 - Manuals

5 1.2 Safety Instructions Safe Environment Do not store or use the InterView in locations that are exposed to heat, extreme cold, high humidity or dusty environment. Room temperature conditions are recommended. Do not subject InterView to severe vibrations or high impact conditions. Do not allow wat...

6 1.3 Product Views Panel Front View 1. Integrated Webcam 2. Balance Bar 3. Multiplatform Control Base 4. Integrated 3-Port USB 2.0 Hub 5. 17 Inch LCD Panels 5 3 1 2 5 4

8 Control Base Back View 1. USB to PC Port 2. Microphone Jack 3. DMS Port 4. AC Power Connector 1 2 3 4

9 2. INTERVIEW SPECIFICATIONS 2.1 InterView Technical Specifications General Model number EVGA InterView 1700 LCD Screen type 17’’Wide TFT Preset display area Horizontal 367.20 mm Vertical 229.50 mm Synchronization Horizontal 31.5 kHz to 81.1 kHz Vertical 56 Hz to 76 Hz Viewing angle Horizontal 20° ...

11 3. SETTING UP INTERVIEW Read the safety instructions before setting up the InterView. 3.1 Steps to Assembling InterView 1. Rotate the balance bar out from the bottom of the base: 2. Remove the caps on the stand and the panel: 3. Assemble the stand and the panel:

12 4. Push in the button and turn it clockwise to lock up the stand and the panel: 5. Open up the panel: 6. Push the balance bar back into the base:

13 3.2 Connecting InterView to a PC Before setting up InterView, you must power down your computer(s). 1. Connect the monitor to a computer(s) using the DMS to Dual DVI-I cord. Note: You can use either the D-Sub plug or the DVI-D plug if there’s no available DVI-I port on your PC. 2. Plug the power ...

15 3.3 Plug and Play Compatibility You can use InterView with any Plug and Play compatible system. The system configures itself and optimizes the display’s settings. In most cases, InterView‘s installation is automatically processed unless the user intervenes.

16 4. HOW TO ADJUST INTERVIEW 4.1 Rotating/Folding Each panel can rotate 180 degrees. The display will automatically adjust to the correct position. Each panel can be opened and closed 90 degrees horizontally.

17 4.2 Control Buttons 1. Power Button: Powers the InterView ON or OFF 2. Panel Selection Button: Selects the monitor to be adjusted 3. Brightness Adjust (Down): Decreases brightness levels 4. Brightness Adjust (Up): Increases brightness levels 5. Auto Adjust: Adjusts vertical position, phase, horiz...

18 5. SYSTEM REQUIREMENTS AND SOFTWARE INSTALLATION 5.1 System Requirements Operating Systems Supported: - Windows XP Home Edition - Windows XP Professional - Windows XP Professional X64 Edition - Windows Vista™ - Windows Vista™ 64-bit Hardware: - 64MB of System Memory or more - 50MB Hard Disk space...

19 (Step 2) Processing Installation - Click Webcam software installation to start the installation process - Click Next, select the application you would like to install, then click Next to continue Note: For users who select to install both webcam driver and application, the installation will start...

20 - Installation in process, the dialogue box will automatically close when the installation completes. Installing the Webcam Driver - Click Install - Click Install

21 - Click Finish then select the option to restart you computer after the installation completes Note: Depending on each user’s PC system and hardware performance, it may take 10 to 15 seconds before entering to the next step, please be patient. - Click Finish to exit the wizard, then the computer ...

22 5.3 Using the InterView Camera Application Main Panel Layout 1. Display screen 2. Record 3. Snapshot 4. Color setting page 5. Snapshot setting page 6. Record setting page 7. Misc setting page 1 2 3 4 5 6 7

23 Color Setting Page This panel allows users to adjust the color settings by dragging the track bars. 1. Brightness adjustment 2. Contrast adjustment 3. Hue adjustment 4. Saturation adjustment 5. Sharpness adjustment 6. White balance adjustment 7. Gamma adjustment 8. Color / Gray scale 9. Backlight...

24 Snapshot Setting Page The InterView webcam application allows users to capture a single photo as well as continuous shooting. In this panel, the application allows users to set snapshot functions, such as time intervals and output formats. 1. Photo quantity for continuous shooting (1-30) 2. Time ...

25 Record Setting Page This panel allows adjustments to the recording function of the webcam. 1. Select the audio device to be captured 2. Select the audio recording source. Ex: Microphone 3. Select the audio encoder to encode the audio stream 4. Select the video encoder to encode the video stream 5...

26 Misc Setting Page Within this panel, users can adjust settings that control different aspects of the image. 1. Video Flip: Flips the video horizontally/vertically 2. Exposure control - Low Light: avoid under-exposure in low light environment - High Light: avoid under-exposure in high light enviro...

27 6. TROUBLESHOOTING 6.1 Self-Test Feature Check Self-Test Feature Check (STFC) allows users to check if the monitor works properly. 1. Turn off both your computer and the monitor 2. Unplug the DMS cable from the back of the computer 3. Turn on the monitor 4. If the monitor is functioning properly,...

30 7. SERVICE INFORMATION 7.1 Product Registration and Customer Support Should you require any assistance with the installation or troubleshooting of the EVGA InterView, please visit the Support section of our website at www.evga.com/support. There you’ll be able to download drivers, check out our e...

31 Your LCD display is subject to replacement if it meets the criteria outlined in the following table: Product Bright Dots Dark Dots Total Dots InterView 6 or more 6 or more Combination of Bright and Dark = 6 or more 7.3 Warranty Terms and Conditions EVGA monitors are covered by a 3 Year limited wa...