Page 2 - Do NOT use in humid or wet conditions; IMPORTANT SAFETY WARNINGS; WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.; WARNING; NOT for use in or on boats or recreation vehicles.; DANGER; DANGER
1 Do NOT use in humid or wet conditions WARNING IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL & SMOKER. WHEN YOU SEE THE SAFET...
Page 3 - carefully follow all of the messages.
CALIFORNIA PROPOSITION 65 WARNING WARNING: This product can expose you to chemicals, including carbon monoxide, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov WARNING: CONTAINS LEAD. MAY BE HARMFUL IF EA...
Page 6 - TURNING ON THE GRILL:; Initial Lighting Instructions; BREAKING IN YOUR GRILL:; cooking surfaces of your grill.; • DO NOT leave your grill unattended while in use.; IF AN EXTENSION CORD IS NECESSARY:; and is marked as suitable for outdoor use.; USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR PELLET GRILL &
5 TURNING ON THE GRILL: Initial Lighting Instructions (To be used on initial fi ring or anytime the grill runs out of pellets) Always allow the auger tube to fully load with pellets to ensure proper lighting of the grill. Step 1 Open hood to cooking chamber and remove cooking grate and grease tray. ...
Page 7 - SUBSEQUENT LIGHTING INSTRUCTIONS:
Step 2 Plug power cord into a GFCI (grounded) outdoor electrical outlet. Use only a GFCI (grounded) protected circuit, never remove the grounding plug or use with an adapter of 2 prongs; and use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved fo...
Page 8 - TURNING OFF THE GRILL:
7 Follow these steps If the grill does not ignite or if the fi re in the fi re pot goes out while cooking: Step 1 Turn the temperature control knob to “OFF” and unplug. Open cooking chamber lid and remove all food, cooking grate, grease tray and heat baffle plate. CAUTION: Some parts may contain sha...
Page 11 - CLEANING AND MAINTENANCE:
PROPER CARE & MAINTENANCE: • Remove wood pellets from hopper if grill will not be used for a long period of time. Wood pellets can become soggy due to moisture/humidity and can cause the auger to bind up or not push pellets to burn chamber. • Disposal of ashes – Ashes should be placed in a metal...
Page 12 - BEFORE STORING YOUR GRILL:; • Clean all surfaces.; TRANSPORTING AND STORAGE:; the utensils thoroughly with soap and hot water.
11 BEFORE STORING YOUR GRILL: • Clean all surfaces. • If storing the grill outdoors, close the wood pellet lid and cover the grill with a cover for protection from the weather. • If the grill is stored outside during the rainy season, care should be taken to ensure that water does not get into the p...
Page 15 - cause any undesired operation.
IC: 25523-EGG1000ASFCC ID: 2AURUEGG1000ASThe device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause any un...
Page 16 - ASSEMBLY INSTRUCTIONS:; READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY; • Phillips
15 ASSEMBLY INSTRUCTIONS: READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT. The following tools are required to assemble this Even Embers Pellet Fueled Ceramic Egg: • Phillips S...
Page 18 - Part Bag Contents
Part Bag Contents 26 Pcs M6x45 Bolts 16 Pcs M6x12 Bolts 1 Pcs M4x30 Bolt 2 Pcs M4x10 Bolts 2 Pcs M8 Nuts 22 Pcs M6 Nuts 4 Pcs M4 Nuts 1 Pcs M4 Spacer M6x45 Bolts - 26 Pcs M6x12 Bolts - 16 Pcs M4x30 Bolts - 1 Pc M4x10 Bolts - 2 Pcs M8 Nuts - 2 Pcs M6 Nuts - 22 Pcs M4 Nuts - 4 Pcs M4 Spacer - 1 Pc 17
Page 19 - WHEELS; using; AXLE BOLTS; and two; M8 NUTS
18 • Attach legs using sixteen M6x12 BOLTS • Attach WHEELS 16 using AXLE BOLTS 15 and two M8 NUTS Step 2 Step 1
Page 29 - WARRANTY
OM1000AS0121 ©2021 The Boltz Group LLC. Carrollton, Texas 75006 U.S.A. www.evenembers.com Owner’s Manual for Models EGG1000AS The Boltz Group warrants to the original pur chas er that the Even Embers Pellet Fueled Ceramic Egg is free from defects due to workmanship or materials for: One-year: frame,...
