Page 2 - Content
Content 1…………………………………..………………………………Safety instructions 2…………………………………..………………………………Installation 3…………………………………..………………………………Start using your cooker hood 4…………………………………..………………………………Troubleshooting 5…………………………………..………………………………Maintenance and cleaning 6…………………………………..………………………………Environment protectio...
Page 3 - SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS T his manual explains the proper installation and use of your cooker hood, please read it carefully before using even if you are familiar with the product.The manual should be kept in a safe place for future reference. Never to do: ● D o not try to use the cooker hood without the...
Page 5 - MOUNTING OF THE V-FLAP
● N EVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. INSTALLATION (VENT OUTSIDE) MOUNTING OF THE V-FLAP If the cooker hood does not have an assembled V-flap 1, you should mount the half- parts to its body. The images only ...
Page 8 - Notice; For safety reason, please use only the same; Start Using Your Cooker Hood; Toggle switch
8 1. Remove the filter. 2. Remove the front cover to expose the front vents. Do not remove the top 120mm outlet cover. 3. Make sure that internal switches are in recirculating position. (see above) 4. Drill 4 fixing holes as per the drawing.Ensure that access has been allowed for the power cable and...
Page 10 - GREASE MESH FILTERS
10 achieved without damage. GENERAL Cleaning and maintenance should be carried out with the appliance cold especially when cleaning.Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces. STAINLESS STEEL The stainless steel must be cleaned regularly (e.g.weekly) to ens...
Page 11 - CARBON FILTER-not supplied; BULB REPLACEMENT
11 - Angle the filter into the slots at the back of the hood. - Push the button on the handle of the filter. - Release the handle once the filter fits into a resting position. - Repeat to install all filters. CARBON FILTER-not supplied Activated carbon filter can be used to trap odors. Normally the ...
Page 12 - ENVIRONMENTAL PROTECTION:
12 down the junction box cover(If there is wire pressing plate which pressed the light wire, the wire pressing plate needs to be dismantled first).See pic 1. Find out the terminal of the light connecting wire and pull it out. See pic 2. Use a tool or the hand to press the spring splinterof both ...
Page 13 - INFORMATION FOR DISMANTLING
13 (4) Remember to switch off the cooker hood after cooking. INFORMATION FOR DISMANTLING Do not dismantle the appliance in a way which is not shown in the user manual. The appliance could not be dismantled by user. At the end of life, the appliance should not be disposed of with household waste. Che...
Page 14 - Pronto; 5 Glynburn Road, Glyn
Pronto Service + Support: 1800 440 335 Email: [email protected]HEAD OFFICE 65 Glynburn Road, Glyn d e SA 5070 Ph: 08 8165 1012 www.euroappliances.com.au