Page 5 - not be subject to physical contact.; Important; adjust the front feet to create a level.
The wine cooler must be positioned that the plug is accessible. Release the power cord and move your wine cooler to its finally location. The wine cooler should be installed in a suitable place where the compressor will not be subject to physical contact. Important For freestanding installation, the...
Page 6 - and occur as follows:
OPERATING YOUR WINE COOLER 1. Turning on your wine cooler. Plug in and switch on the wine cooler by pressing on the power button for a few seconds. When you use the wine cooler for the first time (or restart the wine cooler after having it power off for a long time), there will be a few degrees vari...
Page 7 - process every 8 hours and it will last about 30 minutes.
Avoid obstructing the internal fan (located inside on the back panel of the wine cooler) Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling. Do not pull out more than one loaded shelf at a time as this may cause the wine cooler to tilt forward. Do ...
Page 10 - Interior Light; You can turn on/off the interior light by pressing the “Globe” button.; Installing Stainless Steel Handle; follow the below instruction:
For easy access to the bottles, you must pull the shelves approximately 1/3 of its depth out of the rail compartment. The wooden shelves are designed with stopper to hook against each sides of the shelf track to prevent bottles from falling. hen removing a shelf from the rail compartment in E150WSCS...
Page 11 - Reversing the Door Swing of Wine Cooler; the instructions below:; cushioning to protect the floor and the wine cooler.
Reversing the Door Swing of Wine Cooler This appliance has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the instructions below: Important...
Page 12 - by a qualified electrician.
Power Failures and Operation Anomalies In the event of a power interruption, all previous temperature settings are automatically erased and it will revert to a preset temperature setting. Most power failures are corrected within a short period of time. An hour or two’s loss of power will not affect ...
Page 13 - CARE AND MAINTENANCE
CARE AND MAINTENANCE Clean the condenser The condenser must be kept clean and free of dust at all times. It is recommended that the cleaning routine be conducted at intervals appropriate to the speed of accretion of dust on the condenser. Failure to keep the condenser clean will damage the refrigera...
Page 15 - TROUBLESHOOTING GUIDE; PROBLEM
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Wine Cooler does not operate. Not plugged in. The appliance is turned off. The circuit breaker tripped or a blown fuse. Wine Cooler is not cold enough. Check the temperature control setting. External environment may require a higher setting. The door is o...
Page 16 - POWER FAILURES AND OPERATION ANOMALIES; effect on your wines.
POWER FAILURES AND OPERATION ANOMALIES In the event of a power interruption, all previous temperature settings are automatically erased and it will revert to a preset temperature setting. Most power failures are corrected within a short period of time. An hour or two’s loss of power will not affect ...
Page 17 - TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION Features - E150WSCS 1 Wine Coolers Glass front door with s/steel trim + handle Double glazed door UV filtered Computerized temperature control Dual temperature zones 5-12 C (Upper area) 12-22 C (Lower area) Intuitive optimum humidity control unit Separate internal blue LED li...
Page 18 - Product Dimensions
E150WSCS Product Dimensions 595mm width x 600mm depth x 875mm height (Door handle extra 45mm depth) E150WSCS
Page 21 - WIRING DIAGRAM
Page 22 - SPARE PARTS
