Page 2 - Table of contents; Important safeguards; Order forms and parts list; Where to find important vacuum information; Keep this information; Write the model, type and serial number here:; Before you start your vacuum cleaner; Registration; To register your product visit; Inspection
Page 3 - IS; Do not leave vacuum cleaner when plugged in; . Turn off the switch and unplug the electrical; READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER; SAVE THESE INSTRUCTIONS; To reduce the risk of electric shock; , this appliance has a polarized plug (one blade is wider; WARNING; IMPORTANT SAFEGUARDS; Motor; Do Not Oil
E N G L IS H Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com 1 To reduce the risk of fire, electric shock, or injury:• Do not use outdoors or on wet surfaces.• Do not leave vacuum cleaner when plugged in . Turn off the switch and unplug the electrical cord when not in use and before s...
Page 4 - How to identify parts of vacuum cleaner; Type S belt; filter EF6; Brush roll; Maintenance schedule; Maintenance Schedule is also located on back side of dust cup.; BRUSH ROLL – Clean monthly; Filter assembly; N O T I C E
2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com How to identify parts of vacuum cleaner Type S belt Exhaust/HEPA filter EF6 Washable filter DCF25 Brush roll Handle Turbo nozzle (on some models) Dust cup release Filter assembly (located inside dust cup) Dust cup Exhaust/HEPAfilter co...
Page 5 - Dusting brush; Stair hose; (on some models or available for purchase); Crevice tool; (wand 2 on some models or available for purchase); How to use accessories; C A U T I O N; When using tools, always place handle in upright
E N G L IS H 3 W A N D 11 W A N D 22 W A N D 11 WA N D 22 W A N D 11 TOO LS FLO ORS Dusting brush Use for furniture, drapes and vents. Turbo nozzle (on some models or available for purchase) Use for furniture and stairs. Stair hose (on some models or available for purchase) Make sure vacuum is below...
Page 6 - How to maintain your vacuum cleaner; Make sure vacuum cleaner is turned off and power cord is unplugged.; Maintain brush roll; Motor pulley can become hot with normal use.; How to clear a blockage; Make sure vacuum is turned off and power cord is unplugged.
Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com 4 How to clean brush roll Check brush roll periodically and remove debris.Use scissors to clip threads or hair (Fig. 1). How to replace brush roll • Lay vacuum with back on floor. Remove 3 screws (Fig. 2). Rotate brush roll plate up and ...
Page 7 - How to maintain turbo nozzle; Allow unit to cool completely before servicing.; The Eureka limited warranty
E N G L IS H Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com 5 How to maintain turbo nozzle (on some models) • Turn nozzle onto back side. Remove 1 screw. • Rotate lower part of cover down over brush and lift off cover. • Clear blockage from brush roll area. Use scissors to clip threa...
Page 8 - Problem solving; N O T I C E : T h e r m a l c u t - o f f; Cause; Problem
Problem solving Make sure vacuum is turned off and power cord is unplugged. ! N O T I C E : T h e r m a l c u t - o f f This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating. If the vacuum suddenly shuts off , proceed as follows: 1) Push the power switch ...