Eureka 5700 - Manuals

5 Cord Retainer. To use, push electrical cord down into cordretainer. O N / O F F S w i t c h . I n t e r n a t i o n a l s y m b o l I m e a n s O n ,International symbol O means Off. Dust Bag Cover Latch. Pull up on latch to remove bag covergiving access to the dust bag and motor filter. Filter Do...

7 CAUTION: Assemble the cleaner before using. CAUTION: Moving parts, make sure on/off switch is in off (0) position before plugging in. NOTE: Features may vary by model yet all parts assemble the same. Attach Hose From rear of cleaner, align handle with groove andslide onto cleaner. If necessary, us...

8 Cord Hook Cord Hook Store Electrical Cord Store Hose and Accessories You will find your cord retainer on the handle above theupper cord hook. Firmly push the electrical cord downinto the cord retainer. This will place the cord out of theway the next time you vacuum. Next wind the cord around the t...

1. To use accessories remove hose from rear of cleaner by lifting up and twisting. 2. Place desired accessory onto end of hose or wand. • Turn ridge end to center. • Push wands together. • Grasp both wands near ridges. Dusting/Upholstery Brush is for furniture, blinds, books, lamp shades, shelves, c...

Remove dust bag cover by lifting up on latch andpivoting dust bag cover out and away from cleaner. 10 The instructions in this booklet ser ve as a guide to routine maintenance. To avoid unnecessary service calls, check the dustbag, filters, belt, and brush roll often. NOTE: When vacuuming carpet fre...

11 Pre-Motor Filter Check the pre-motor filter each time the dust bag is changed.Clean or replace as needed. To Clean Pre-Motor Filter 1. Locate dust bag support in bottom of dust bag compartment. Remove filter centered in the bottom of the dust bagcompartment. 2. Shake filter to remove excess dust....

12 Br ush Roll Belt Br ush Roll 5. Place new belt around motor shaft. 6. Place belt around brush roll pulley. 7. Align left end cap with base. Push end cap securely into place. 8. Pull right side of brush roll to stretch belt. Secure right end cap into base. IMPORTANT 9. Rotate brush roll by hand tw...

13 How To Change Light Bulb (Only for models with a headlight) NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb. Lower handle. Remove the screw from lens cover.Requires a Phillips® head screwdriver. Pull lens cover from cleaner. Pull old light bulb out of...

To Clear Blockages in Hose NOTE: Turn off the switch and unplug the electrical cord before clearing hose. Locate upper hose adapter on the back of thecleaner. Remove nested wands from back of cleaner for easyaccess to hose adapter tabs. Press hose adapter tabs together and pull hoseadapter away from...

Motor will not start. Electric Plug Push plug securely into outlet.Try another outlet.Check circuit breaker. Motor suddenly stops. Thermal Cut Off Page 6. Does not clean the carpet Filters Clean or replace the filters. Hint: If picking up fine or floor. dust, the filters may not look dirty but a fin...

THE EUREKA LIMITED WARRANTY W hat This Warranty Covers Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to theoriginal purchaser and members of his or her immediate household. The w...

©2002 White Consolidated, Ltd. Part No. 72104 (4/02) Printed in U.S.A. Thank you for selecting a Eureka cleaner. 1 wand, 1 crevice wand 1 vacuum cleanerhandle Accessory Items in This Carton 1 hardware package (2 screws) Questions? Do Not Return To Store Call 1-800-282-2886 7 a.m. to 8 p.m., Central ...