Eureka 4880 - Manuals

6 6. You will find your cord retainer on the handle above the upper cord hook. Firmly push the electrical corddown into the cord retainer before using the vacuum.This will place the cord out of the way while you arevacuuming. Remove cord from retainer when readyt o s t o r e v a c u u m o r w h e n ...

7 HOW TO USE 1. Cord Retainer. To use, push electrical cord down into cord retainer. 2. Motor Filter Indicator (red light) (on some models). Indicates when motor filter needs to be cleaned or replaced. 3. HEPA Filter Indicator (red light) (on some models) Indicates when the HEPA filter needs to be r...

8 HOW TO USE (continued) 15. Hose Retainers (2). Place hose on retainers to store hose on unit. 16. Electrical Cord Hooks (2). Wrap electrical cord around them to store electrical cord on unit. The upper cord hook turns to release the cord. Turn the hook up to store the cord. 17. Clear Dirt Tube. Th...

9 How To Use Accessories NOTE: Place cleaner on floor with the handle i n s t o r a g e p o s i t i o n w h i l e u s i n gaccessories. Do not place cleaner onfurniture or steps. 1. Separate hose end from cleaner by pulling up with a slight twisting motion. Remove hose from hoseretainers. 2. Place d...

10 1 2 NOTE: Turn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hotd u r i n g n o r m a l u s e . To p r e v e n t i n j u r y, a v o i dtouching the motor shaft when checking the belt. 1. Move brush roll control lever to hard floor position. 3. Remove...

5. Insert right end into base. Make sure it is fully intoposition. Ensure belt is centered on brush roll pulley.NOTE: The new belt will appear to be too large. Thisis normal. How To Replace Brush Roll Belt (continued) 5 6. Replace base plate by first inserting all 4 front tabsinto slots on base. Rot...

12 Dust CupLever 1 2 FilterTube 3 Filter 6 FilterTubeRetainer Seals 6 7 HOW TO MAINTAIN (continued) NOTE: Turn off the switch and unplug the electrical cord before emptying dust cup. Never operate the vacuum cleaner without the dust cupand filters properly installed. Emptying the Dust Cup: It is cle...

14 How to Remove and Check Clear Tube Low suction or poor pickup may be due to a blockage in the vacuum cleaner. To Check Attachment Hose 1. Remove hose and check suction at end of hose - if little or no suction, check dust cup and filters. Empty dust cup and clean or replace filters, if needed . If...

How to Reassemble Clear Tube 10. Reattach hose to clear tube. Insert hose and rotate clockwise to secure. 11. Hook the bottom of the clear tube on the cleaner next to the combination brush storage location. 12. Swing top of tube up and against the cleaner till quarterturn lock is in place. Then fast...

Motor will not start. 䡺 Electric Plug 䡺 Push plug securely into outlet. 䡺 Try another outlet. 䡺 Check circuit breaker. Motor suddenly stops. 䡺 Thermal Cut Off 䡺 Refer to page 8. Does not clean the carpet or 䡺 Dust Cup and Filter(s) 䡺 Empty the dust cup. Hint: If picking up fine dust, the dust floor....

71643 61111 61110 71119-2 28251-119N 60990-2 61499-1 61250-1 57940-2 61498-1 71548 71681 70557-1 9.99 19.99 4.99 8.49 4.99 4.99 19.49 31.49 1.49 15.99 5.99 2.99 5.99 Motor Filter/Tube Filter HEPA Filter Cartridge (style HF2) Belt (style R) - Extended Life, package of 1 Extension Tubes Crevice Tool C...

THE EUREKA LIMITED WARRANTY W hat This Warranty Covers Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to theoriginal purchaser and members of his or her immediate household. The w...

©2001 White Consolidated, Ltd. Printed in U.S.A. Part No. 71389 (1/03) Thank you for selecting a Eureka cleaner. 1 set of nesting wands 1 crevice tool 1 vacuum cleanerhandle to be installedon unit Accessory Items in This Carton 1 hardware package (2 screws) Questions? Do Not Return To Store Call 1-8...