Page 2 - IMPORTANT SAFEGUARDS; WARNING; SAVE THESE INSTRUCTIONS; Index
2 IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock, or injury.• Do not use outdoors or on wet surfaces.• Do not lea...
Page 3 - HOW TO ASSEMBLE; Step A Attach Hose; GENERAL INFORMATION; Thermal Cut Off
HOW TO ASSEMBLE CAUTION: Assemble the cleaner before using. CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. NOTE: Features may vary by model yet all parts assemble the same. Step A Attach Hose To reduce the risk of electric shock, this appliance has a polarized ...
Page 4 - Step B Attach Handle; Step C Store Hose and Accessories; Step E Check Cyclonic Cassette
4 HOW TO ASSEMBLE (Continued) Step B Attach Handle CAUTION: Do not catch cord under handle. 3. From rear of cleaner, align handle with groove and slide onto cleaner. If necessary, use thumb and finger pressure to slide handle into position. 4. Once handle is in place, check that the hose adapter tab...
Page 5 - HOW TO USE
Handle Release ON/OFF 4 3 2 5 Clean Under Use Handle Release 3 HOW TO USE The upright vacuum cleaner design allows use on multiple types of carpeting and on upholstery or bare floors with attachments. When using the attachment tools, place the handle in the upright position. Do not place cleaner on ...
Page 6 - How To Use Accessories; Mini Turbo Nozzle
6 Crevice Tool Dusting Side Combination Tool gives two types of cleaning tools. (On some models.) • Use brush side to dust furniture, blinds, books, lamps, shelves. • Use upholstery side for curtains, draperies, cushions, fabrics. • Turn ridge end to center. • Push wands together. • Pull apart. Upho...
Page 7 - HOW TO MAINTAIN; To Change Cassette Micron Filter:; To Change the Cassette Micron Filter:; FOR INSTRUCTIONS ON HOW TO REMOVE THE CYCLONIC CASSETTE FROM THE
It is clearly visible when the dust compartment is full and needs emptying. Lift screen as shown (3) to completely empty cyclonic cassette. It is possible to clean out the cyclonic cassette by using another vacuum. CAUTION: The cyclonic cassette can be washed in warm water, if desired, but strong de...
Page 8 - Brush Roll
2 8 HOW TO MAINTAIN 1. Lower handle to floor to change belt.2. Loosen, but do not remove, two screws to release hood. Lift hood to remove. 3. Lift left end of brush roll.4. Remove and discard belt. 3 Motor Pulley Belt Brush Roll The instructions in this booklet serve as a guide to routine maintenanc...
Page 9 - To remove HEPA; filters; filters; HEPA Cartridge Filters; How to Clear Hose Clogs; filter frame; To replace filters into; Filters in Filter Frame
9 To remove HEPA cartridge filters 1. Push down latch and pull filter cassette back.2. Then lift filter up and remove. To replace HEPA cartridge filters 1. Place bottom tabs of filter cassette into slots.2. Rotate filter toward cleaner.3. Push upward on the latch to secure into place. NOTE: To have ...
Page 10 - THE EUREKA LIMITED WARRANTY; GENUINE; Motor Filter
10 THE EUREKA LIMITED WARRANTY W hat This Warranty Covers Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to the original purchaser and members of his or her immediate household. T...
Page 11 - Problem Solving
11 Use 15 watt replacement light bulb, part number 48815. HOW TO MAINTAIN (continued) How To Change Light Bulb (only for models with a headlight) NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb. 1. Lower handle. Remove two screws from lens cover. 2. Pull...