Page 2 - Table of Contents; Using the MACH Vacuum Cleaner 06
Table of Contents Overview ………………………………………… 02 Button Control ……………………………… 03 Charging ………………………………………… 04 Turning On ……………………………………… 05 Initial Setup Using the MACH Vacuum Cleaner 06 Add Water and Floor CleanerStart / Stop cleaning LCD Screen Guide ………………………… 09 Selecting a Cleaning Mode ………… 10 Us...
Page 3 - Overview
02 EN Overview max m a c h Mode button Power button LCD display screen Rubber cover Clean water tank High-performance filter Dirty water tank Rolling brush cover Multi-surface rolling brush (Not suitable for use on high-pile rugs) Removable cover Charging base Self-cleaning button Handle barFloor cle...
Page 4 - Button Control; Action
02 EN EN 03 Button Control Action Function 1s Press and hold the power button for 1 second • Turn on or off Press the power button • During cleaning, pause or resume current task• During menu setting, skip to the previous menu option 1s Press and hold the mode button for 1 second • Enter menu settin...
Page 5 - Charging
04 EN Charging Before first use, fully charge the MACH Vacuum Cleaner for 4 hours. max 1 2 m a c h 3 1 Wrap your power cable as needed and keep your cable organized. 2 Connect the power cord to a power outlet. 3 Place the MACH Vacuum Cleaner onto the charging base. • The LCD display lights up and yo...
Page 6 - Turning On
04 EN EN 05 Turning On 1 max max m a c h 1s 2 1 Gently step on the foot pedal and push the handle bar backward until you hear a click. 2 Press and hold the power button for 1 second to turn on the MACH Vacuum Cleaner. • The LCD display lights up. Initial Setup Before you start, make sure that: • You...
Page 7 - Using the MACH Vacuum Cleaner; Add Water and Floor Cleaner; Add Clean Water; Click
06 EN Using the MACH Vacuum Cleaner Add Water and Floor Cleaner Add Clean Water 1 max 2 max max Click 3 4 max 1 Remove the clean water tank from the MACH Vacuum Cleaner. 2 Open the rubber cover. 3 Add tap water until it reaches the MAX water line. • Do not use mineral or purified water. 4 Replace th...
Page 8 - Add Floor Cleaner
06 EN EN 07 Add Floor Cleaner 1 2 3 4 Click 1 Remove the floor cleaner tank. 2 Open the rubber cover. 3 Add floor cleaner into the floor cleaner tank. 4 Replace the floor cleaner tank. You will hear a click when it is locked in place. • To use the floor cleaner during cleaning, make sure the floor c...
Page 9 - Start / Stop cleaning
08 EN Start / Stop cleaning • The MACH Vacuum Cleaner cannot clean high-pile rugs more than 1cm in height.• Do not clean carpets which are made of materials including wool or other animal furs. • It is recommended to clean your carpets in suction mode. m a c h max 3 2 max Click max m a c h 1s 1 max ...
Page 10 - LCD Screen Guide
08 EN EN 09 LCD Screen Guide The LCD screen will show you the working status of the MACH Vacuum Cleaner. 4 2 3 8 7 5 1 6 1 Shows current volume level of voice prompts (High / Low / Mute) 2 Shows the animation of current work mode 3 Lights up when floor cleaner switch is turned on 4 Shows current char...
Page 11 - Selecting a Cleaning Mode; Using the Trigger
10 EN Selecting a Cleaning Mode During cleaning, press the mode button to select a cleaning mode. • You will hear the corresponding voice prompt when a mode is selected. Mode Use Smart mode (default) For daily mopping and hard floor washing Steam mode Ideal for removing stubborn stains and bacteriaIn...
Page 12 - Using the Menu
10 EN EN 11 Using the Menu From the menu, you can access additional features and information. m a c h 1s 1 Press and hold the mode button for 1 second to access the menu options. • Select a language. • Adjust volume.• Enable or disable EcoClean™ Ozone disinfection. The icon is displayed when this fe...
Page 13 - Status Light Indication
12 EN Status Light Indication Status lights Indication Status Steam status light Scrolling red light Preparing steam Pulsing red light Ready for steam release Steady red Release steam (when holding the trigger) Off Exit steam mode Ozone status light Steady white Enable ozone disinfection Off Disable...
Page 15 - Drying of the Rolling Brush; Clean the Dirty Water Tank
14 EN Drying of the Rolling Brush If only the rolling brush needs to be dried, hold the trigger for 2 seconds when the MACH Vacuum Cleaner is on the charging base. • The device begins drying of the rolling brush. max m a c h Clean the Dirty Water Tank 1 5 max max 4 3 2 max 6 ma x Click ma x 1 Remove...
Page 16 - Enable Descaling Mode
14 EN EN 15 Enable Descaling Mode Steam release may be decreased after the MACH Vacuum Cleaner has been used for a period of time. It is recommended to descale the MACH Vacuum Cleaner every half a year. m a c h m a c h 1s 1 Press and hold the mode button for 1 second to access the menu options. 2 Pr...
Page 17 - Start descaling
16 EN Start descaling 1 6 7 3 2 4 5 max Click m a c h max max max max max max Click 1 Place the MACH Vacuum Cleaner on the charging base. 2 Remove the clean water tank. 3 Open the plastic bag and pour the whole bag of citric acid into the clean water tank. Then add clean water until it reaches the M...
Page 18 - Clean the Rolling Brush Manually
16 EN EN 17 Clean the Rolling Brush Manually The multi-surface rolling brush can be cleaned automatically through self-cleaning, but some foreign substances, such as hair, can easily get tangled in the rolling brush, so it is best to clean the rolling brush manually if it occurs. • Before removing t...
Page 19 - Clean the High-Performance Filter; Clean the Removable Cover
18 EN Clean the High-Performance Filter It is recommended to clean the filter once a week. 1 2 3 ma x max 1 Remove the dirty water tank. 2 Remove the high-performance filter. 3 Rinse the filter and dry it completely before next use. Clean the Removable Cover It is recommended to clean the cover once a ...
Page 20 - Clean the Steam Nozzles; Troubleshooting; MACH Vacuum Cleaner is not working normally:; Suction power is decreased or there is a loud noise:
18 EN EN 19 Clean the Steam Nozzles When the steam nozzles are clogged by any foreign objects, clean them with a dry cloth or paper towel. Troubleshooting MACH Vacuum Cleaner is not working normally: • Make sure the battery is fully charged.• Make sure the handle bar has been pushed backward and you...
Page 21 - Specifications
20 EN Specifications Model V1 Ultra Rated voltage (charging base) AC 100-240 V Battery life •Maximum 82 minutes (in smart and suction modes)•Maximum 15 minutes (in steam mode) Battery energy 159.84 Wh Battery capacity 7400 mAh Charging time ≤4 hours Noise 65 dBA, measured according to SPL (sound pre...
Page 22 - 4-month limited warranty
20 EN EN 21 Customer Service For tutorial videos, FAQs, manuals, and more information, please visit: https://support.eufylife.com Warranty: 24-month limited warranty Contact Us [email protected] (US/CA) +1 (800) 994 3056(UK) +44 (0) 1604 936200 (DE) +49 (0) 69 9579 7960( 日本 ) 03 4455 7823 www.eufyli...
