Emerson SS-100- Manuals

Page 5 - Table of Contents

SS-100 Serial Server • v Table of Contents 1 INSTALLING THE SS-100 .......................................................................................................................................... 1 1.1. W ORKING WITH THE N ETWORK A DMINISTRATOR ................................................

Page 7 - Installing the SS-100; IP Address Specification; Network Considerations; Requirements

SS-100 Serial Server Installing the SS-100 • 1 1 Installing the SS-100 The CPC SS-100 Serial Server (P/N 570- 2000) is a device that allows Retail Solutions REFLECS controllers (RMCC, BEC, or BCU) to communicate over a TCP/IP Ethernet network using the controller’s serial port. Tra-ditionally, REFLE...

Page 8 - SS-100 HALComm and UltraSite Wiring Layouts; SS-100 Direct to HALComm Steps

2 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010 ed) • DB-25/DB-9 female/female null modem cable (not provided) • Static IP Address Requirements for Computers Connecting to SS- 100: • IBM PC running Windows 9x/NT/XP/2000 set up on an IP network • EzWebCon Installed (downloa...

Page 9 - SS-100 to Reflecs Steps

SS-100 Serial Server SS-100 Wiring Requirements • 3 7. Plug 110VAC/5VDC power transformer into the SS-100. SS-100 to Reflecs Steps 1. Connect the 25-pin end of the D25/DB9 straight-through connector to the SS-100. 2. Connect the 9-pin female end of the laptop cable to the straight-through serial con...

Page 10 - Configuring the

4 • SS-100 HALComm and UltraSite Wiring Layouts 026-1607 Rev 4 07-APR-2010 3 Configuring the SS-100 1. IMPORTANT: Download the latest version of EZWebCon from the Lantronix Web site www.lantronix.com . 2. Connect the SS-100 to the LAN and power up the unit. 3. Open EZWebCon on your computer (which m...

Page 11 - Setting the Server Properties

SS-100 Serial Server Configuring the SS-100 • 5 word ( system is the default password) and click Login : 3.1. TCP/IP Setup 1. Click the TCP/IP link from the list along the left- hand side of the Home screen: 2. Contact your Network Administrator to go through the following steps. (Steps correspond t...

Page 12 - UltraSite

6 • Setting the Port Properties for UltraSite and HALComm in Lantronix 026-1607 Rev 4 07-APR-2010 2. Set the Port Inactivity Timeout to 5 minutes under Server Settings and click the Update Server Settings button. 3.3. Setting the Port Properties for UltraSite and HALComm in Lantronix 3.3.1. UltraSit...

Page 13 - HALComm

SS-100 Serial Server Configuring the SS-100 • 7 3.3.2. HALComm If using HALComm, set the following parameters on the Lantronix: • Set the Flow drop-down list to ctsrts . • Check the Inactivity Logout and Modem Emulation boxes. • Type an A in the Start Character field. • Click the Update Port Setting...

Page 14 - Reflecs; Troubleshooting; BCU; BEC

8 • UltraSite32 Setup as Alarm Receiver for SS-100 026-1607 Rev 4 07-APR-2010 4 Reflecs 4.1. UltraSite32 Setup as Alarm Re-ceiver for SS-100 1. Open UltraSite32 and add a site for the Reflecs controller that will be connected via Lantronix. 2. Right-click on a site in the Tree View and select Edit C...

Page 15 - RMCC

SS-100 Serial Server Reflecs • 9 Communications to access the Communications Setup screen : 3. Set LAN Adapter as the Dial-out Device. 4. Press 0 to go back to the Configuration screen. 5. Press 3. System Information to open the BEC System Information screen. 6. Press the down arrow once and the sec...