Page 2 - Safety Instructions; ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION; All wiring must conform to National and Local Electrical Codes.; WARNING
2 Safety Instructions WARNING: To avoid fire, shock, and serious personal injury, follow all instructions carefully.1. Read your Owner's Manual carefully before installing the Remote Control or WallControl. Retain Owner's Manual for future reference. 2. Before servicing or cleaning the ceiling fan, ...
Page 3 - PROCEDURES; CONTROL PROCEDURES
General Your Emerson Ceiling Fan/Light SR600Remote Control consists of hand-heldtransmitter and a receiver which ismounted under the fan ceiling cover. Theremote control is designed to separatelycontrol your ceiling fan speed and lightintensity. The remote control transmitter is poweredby two AAA al...
Page 4 - Figure 1; Figure 2; Installation of Storage
4 Setting Operating Frequency of SR600 Remote Control 1. Slide the five switch levers in theremote control to your choice of ON(up) or down positions. Use a ball-pointpen or small screwdriver and slide thelevers firmly up or down. 2. When power is restored, push and holdthe fan OFF button ( ) for 3 ...
Page 5 - General; Figure 3
General Your Emerson Ceiling Fan/Light SR650Remote Control consists of hand-heldtransmitter with wall mount and a receiverwhich is mounted under the fan ceilingcover. The remote control is designed toseparately control your ceiling fan speedand light intensity. The remote control transmitter is powe...
Page 6 - Figure 5; Setting Operating
Figure 5 Setting Operating Frequency of SW605 Wall Control Your wall control has code switches whichmust be set in one of 32 possible codecombinations (Figure 5). The five levers(numbered 1, 2, 3, 4, and 5) on theswitches are factory-set in the ON (up)position. Change the switch settings asfollows: ...
Page 7 - Installation of Wall Control; SINGLE-POLE INSTALLATION; Figure 6; Figure 7
Installation of Wall Control SINGLE-POLE INSTALLATION (Figure 6) 1. Disconnect electrical power to thebranch circuit at the circuit breaker orfuse box before attempting to install theceiling fan wall control into the outlet box. 2. Remove faceplate and screws fromexisting wall control. Pull control ...
Page 8 - Figure 8
3-WAY WIRlNG DIAGRAM:NEW CONSTRUCTION 6. Screw wall control into wall box usingthe supplied screws. Leave wallcontrol in “OFF” mode until faninstallation is completed. 7. The wall control is supplied with awhite, ivory, and almond color switchcovers. Choose the finish that bestsuits your needs and s...
Page 9 - Figure 9; Operation of Your Wall; IMPORTANT
HOT BLK TRAVELER WIRES BLACK LOAD EXISTING WALL CONTROL FAN/LIGHTWALL CONTROL BLK BLACK LOAD TRAVELER WIRES HOT BLK EMERSON ® EMERSON ® BLK BLK HI MED LOW FAN OFF LIGHT ON OFF HI MED LOW FAN OFF LIGHT ON OFF 3-WAY WIRING DIAGRAM: RETROFIT Figure 9 Operation of Your Wall Control (Figure 10) Your wall...
Page 10 - INSTRUCTION TO THE USER (if device contains a digital device); Reorient or relocate the receiving antenna.; Fan/Light Fails to Operate; • Check that the speed switch on the; Short Range; • If the remote control operates the fan; Trouble Shooting
10 INSTRUCTION TO THE USER (if device contains a digital device) This equipment has been tested and found to comply with the limits for a class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residenti...
Page 11 - LIMITED WARRANTY; nearest authorized service center.
11 LIMITED WARRANTY What The Warranty Covers: All products covered by this Owner’s Manual are warranted against all defects in workmanship andmaterials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: All components are covered by this warrant...
Page 12 - Air Comfort Products; DIVISION OF EMERSON ELECTRIC CO.
Part No. F40BP74170000 Printed in China 12/09 Form No. BP7417 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 BP7417 SR600 SR650 SW605 12/15/09 8:29 PM Page 12