Emerson SOLATRON Plus Three Phase Power Conditioners- Manuals

Page 3 - Contents; Warnings Defined

Solatron™ Plus Series Instruction Manual • iii Contents 1.0 Important Safety Instructions ..................................................................... 4 1.1 Safety Precautions .................................................................................................. 4 2.0 Warnings D...

Page 4 - Important Safety Instructions; Safety Precautions — Warnings; with or without a load being supplied.

Solatron™ Plus Series Instruction Manual • 4 1.0 Important Safety Instructions This manual contains important safety instructions that should be followed during the installation of the Solatron™ Plus. Please read all safety, installation, and operating instructions before attempting to install or op...

Page 5 - efficiency and extending the useful life of protected loads.; No Harmonic Interactions:

Solatron™ Plus Series Instruction Manual • 5 3.0 Introduction The SolaHD Solatron™ Plus Series is designed to provide a tightly regulated, isolated voltage source to sensitive loads. It increases reliability by improving efficiency and extending the useful life of protected loads. Input voltages fro...

Page 6 - Installation Instructions; ensure adequate ventilation.; The following environmental conditions must be met:; Failure to comply with the above environmental conditions

Solatron™ Plus Series Instruction Manual • 6 4.0 Installation Instructions 4.1 Unpacking Upon receipt of the unit, immediately inspect the enclosure(s) and contents for obvious signs of damage and/or mishandling (loose parts, enclosure dents or holes). If damaged, photograph the unit, inform the car...

Page 7 - Electrical Connections; nameplate indication.; Ensure that the source voltage and maximum load kVA

Solatron™ Plus Series Instruction Manual • 7 4.4 Electrical Connections The unit is designed to operate from a voltage source as indicated on the name- plate and to power loads where maximum continuous kVA does not exceed the nameplate indication. Ensure that the source voltage and maximum load kVA ...

Page 8 - Input; All power and ground cable connections have been secured.

Solatron™ Plus Series Instruction Manual • 8 4.4.2 Lug Size Table (per phase) Three-Phase Input Output 208/240 V 480/600 V 208/240 V 480/600 V 20 #10-1/0 #10-1/0 #14-2/0 #14-2/0 30 #14-4/0 #10-1/0 #14-2/0 #14-2/0 50 #14-4/0 #10-1/0 #14-2/0 #14-2/0 75 #14-4/0 #10-1/0 (2) #6-350 #14-2/0 NOTE: All lugs...

Page 9 - Problem

Solatron™ Plus Series Instruction Manual • 9 5.1.4 Reset the Auxiliary Breaker 1. Open the main circuit breaker. 2. Remove the front cover. 3. Reset the auxiliary breaker by opening and closing the breaker (so both breaker handles are in the up position). 4. Replace the front cover. 5. Close the inp...

Page 11 - All maintenance should be performed by qualified; checked once per month and cleaned if necessary.; Warranty Information; Please see the “Terms & Conditions of Sale”.

Solatron™ Plus Series Instruction Manual • 11 8.0 Maintenance ! Warning! All maintenance should be performed by qualified personnel only, with the incoming power disconnected (except as required to measure voltage). Qualified personnel MUST be familiar with industrial electrical equipment and all sa...