Emerson MP200- Manuals

Page 2 - IMPORTANT NOTES; Shielded cables must be used with this unit to ensure compliance

2 IMPORTANT NOTES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This e...

Page 3 - SYSTEM REQUIREMENTS

3 COPYRIGHT/TRADEMARKS Microsoft ® , WMA™ and the Windows ® logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac ® and the Mac ® logo are trademarks of Apple Computer, Inc. registered in the United States and/or other countries. Penti...

Page 5 - PREPARATION FOR USE; POWER SOURCES; WHEN TO CHANGE THE BATTERY

5 PREPARATION FOR USE POWER SOURCES This player is designed to operate on one alkaline “AAA” batteries, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty. INSTALLING THE BATTERIES The battery compartme...

Page 6 - LOCATION OF CONTROLS

6 LOCATION OF CONTROLS 1 2 3 4 5 67 89 10 11 15 12 13 17 16 14 1.) Battery Compartment2.) MODE Button3.) PLAY/PAUSE Button 4.) REC (RECORD) Button5.) HOLD Switch6.) VOLUME + Button7.) VOLUME - Button8.) FWD SKIP/SEARCH Button9.) REV SKIP/SEARCH Button 10.) STOP Button11.) REPEAT Button 12.) EQ Butto...

Page 7 - MULTIFUNCTION LCD DISPLAY

7 MULTIFUNCTION LCD DISPLAY 1.) Music Mode Indicator2.) Repeat One Indicator3.) Repeat All Indicator 4.) Battery Indicator5.) Current/Total Song Indicator6.) Song Information7.) Bitrate Information 8.) Volume Indicator9.) Elapsed Time Indicator10.) Preset EQ [ Nor. (Normal)/ Class (Classic)/Jazz/Pop...

Page 8 - HOLD SWITCH

8 HOLD SWITCH The HOLD switch locks all of the other controls buttons. If you are carrying the player in a backpack, handbag, gym bag, etc, set the HOLD switch to the ‘On’ position to prevent it from turning ‘On’ accidentally by something pressing against the PLAY/PAUSE button. Likewise, once you st...

Page 9 - INTERNAL AND EXTERNAL MEMORY

9 INTERNAL AND EXTERNAL MEMORY • Your player will have slightly less memory available than stated due to the necessary memory needed for it’s ﬁrmware. • In addition to the built-in memory, you can install a SD®/MMC card. Your player supports up to 512MB SD®/MMC cards. • NOTE: Both the internal and e...

Page 10 - CONNECT THE PLAYER TO YOUR COMPUTER

10 CONNECT THE PLAYER TO YOUR COMPUTER 1.) Slide the HOLD switch to the off position.2.) Plug the USB cord into the player. Plug the other end of the USB cord into an open USB port in computer. ��

Page 11 - TRANSFERRING MUSIC AND DATA FILES

11 TRANSFERRING MUSIC AND DATA FILES 1.) Conﬁrm player is connected to computer.2.) On your Desktop, double-click the “My Computer” icon.3.) Drag and drop ﬁles onto the MP200 drive (“Removable Disk”).• NOTE: The player stores all types of formatted ﬁles. However, it will only play MP3/WMA™ formatted...

Page 12 - OPERATION

12 OPERATION 1.) Unplug player from the USB cord. Make sure you have at least one MP3/WMA™ ﬁle already stored on the player. 2.) Make sure the HOLD switch is in the off position.3.) Connect the earbuds to the headphone jack.4.) Press and hold the PLAY/PAUSE button until the player’s display comes ‘o...

Page 13 - LIST OF BASIC OPERATIONS; To select a different track:

13 LIST OF BASIC OPERATIONS Power on the unit: Press and hold the PLAY/PAUSE button for approximately 2 seconds. To play track: Press the PLAY/PAUSE button. To select a different track: Press the FWD or REV buttons. To search through a track: Press and hold the FWD or REV buttons. To momentarily pau...

Page 14 - REPEAT MODES

14 REPEAT MODES • Each time the REPEAT button is pressed, the play mode will change from: repeat one track , repeat all tracks , random repeat , and no repeat. • The FWD and REV buttons will not select tracks in random during random play.

Page 15 - DELETE A MUSIC OR DATA FILE

15 DELETE A MUSIC OR DATA FILE 1.) Conﬁrm player is powered up and connected to computer.2.) On your Desktop, double-click the “My Computer” icon.3.) Select the desired ﬁles to delete.• NOTE: The ﬁrst drive listed as “Removable Disk” represents the internal memory; the second “Removable Disk” repres...

Page 16 - DELETE A TRACK DIRECTLY FROM PLAYER

16 DELETE A TRACK DIRECTLY FROM PLAYER • Make sure your player is disconnected from your computer. • Press the FWD or REV buttons to select a track. 1.) Press the REPEAT button and the EQ button together.2.) Press the FWD /REV buttons to highlight “Yes” or “No”.3.) Press the MODE button to conﬁrm yo...

Page 17 - VOICE RECORDING

17 VOICE RECORDING 1.) Press the MODE button to toggle to the Voice Record mode. indicator appears on display. 2.) Press the REC button and speak into the built-in mic. Speak approximately 1 foot away from the built-in mic for best results. • Press the REC button again to pause recording. Press the ...

Page 19 - CHANGE THE DISPLAY COLOR

19 CHANGE THE DISPLAY COLOR You can select a different color for the Music mode, Voice Record mode and Settings mode.1.) While the player is stopped, press and hold the MODE button for 2 seconds to enter the Settings mode. 2.) Press the FWD or REV buttons to highlight “LCD Color”.3.) Press the MODE ...

Page 20 - CHANGE THE BACKLIGHT SETTING; CHANGE THE AUTO POWER OFF FEATURE

20 CHANGE THE BACKLIGHT SETTING You can choose to have the backlight automatically turn off after a period of time, or to remain off.1.) While the player is stopped, press and hold the MODE button for 2 seconds to enter the Setting mode. 2.) Press the FWD or REV buttons to highlight “Backlight”.3.) ...

Page 22 - RESTORE THE DEFAULT SETTINGS; POWER OFF

22 RESTORE THE DEFAULT SETTINGS You can restore the default options for the Settings menu.1.) While the player is stopped, press and hold the MODE button for 2 seconds to enter the Setting mode. 2.) Press the FWD or REV buttons to highlight “Default Set”.3.) Press the MODE button to select “Default ...

Page 23 - TROUBLESHOOTING; Player is not recognized on my Windows® 98SE computer:; Buttons do not work/player does not power up:; No sound is heard through the headphones:

23 TROUBLESHOOTING Player is not recognized on my Windows® 98SE computer: Install the MP200 driver from the website. Connect the player to your computer and follow your operating system’s instructions to ﬁnish installing the driver. For more info visit our website: www.emersonradio.com . If player i...