Emerson HSRL Series Second-Stage Regulator- Manuals

Emerson HSRL Series Second-Stage Regulator– User Manual in PDF format online.

Manuals:

User Manual

User Manual Emerson HSRL Series Second-Stage Regulator

Summary

Page 2 - R600 and HSRL Series LP-Gas Regulators; Specifications; Drill on outlet and inlet; Orifice Sizes; Internal; Second Stage Low Pressure Regulators

R600 and HSRL Series LP-Gas Regulators 2 Specifications Pressure Taps Size Restriction R600 Series: 1/8 NPT: #54 (0.055 inch / 1.40 mm) Drill on outlet and inlet HSRL Series: None Orifice Sizes R600 Series (Except R632A and R632E Series): 7/32 inch / 5.6 mm R632A and R632E Series: 0.256 inch / 6.5 m...

Page 3 - Integral Two-stage Regulator; The Type R632A integral two-stage regulator contains; Integral Two psig Service Regulator; The Type R632E integral two psig service regulator; Installation; WARNING; All vents should be kept open to permit; General Installation Instructions; Before installing the regulator,

R600 and HSRL Series LP-Gas Regulators 3 TYPE TYPICAL SETPOINT NOMINAL RELIEF VALVE START-TO-DISCHARGE MAXIMUM INLET PRESSURE TO NOT EXCEED OUTLET PRESSURE WITH DISC REMOVED Inlet Pressure Maximum Outlet Pressure psig bar psig bar psig bar psig bar HSRL 11 inches w.c. 27 mbar 1 69 mbar 15 1.0 2 0.14...

Page 4 - • Make sure gas flow through the regulator is in the same; Installation Location; The installed regulator should be adequately

R600 and HSRL Series LP-Gas Regulators 4 • Replace old pigtails. Blow out any debris, dirt or copper sulfate in the copper tubing and the pipeline. • Apply pipe compound to the male threads of the pipe before installing the regulator. • Make sure gas flow through the regulator is in the same directi...