Emerson FXMP25- Manuals

Page 2 - If there is any doubt please contact LEROY-SOMER.; Environmental statement

General Information The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent or incorrect installation or adjustment of the optional operating parameters of the equipment or from mismatching the variable speed drive with the motor. The contents of this guide...

Page 3 - Mentor MP Short Form Guide; Contents

Mentor MP Short Form Guide 3 Issue : c www.leroy-somer.com Contents 1 Safety Information ............................................................... 7 1.1 Warnings, Cautions and Notes ................................................................ 7 1.2 Electrical safety - general warning ........

Page 5 - Note

Mentor MP Short Form Guide 5 Issue : c www.leroy-somer.com Note

Page 6 - Safety Information; Warnings, Cautions and Notes; Specific warnings are given at the relevant places in this Guide.; System design and safety of personnel; The drive is not intended to be used for safety-related functions.; Warning; Caution; the product or other equipment.

6 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 1 Safety Information 1.1 Warnings, Cautions and Notes 1.2 Electrical safety - general warning The voltages used in the drive can cause severe electrical shock and/or burns, and could be lethal. Extreme care is necessary at all times when wor...

Page 7 - Mentor MP User Guide

Mentor MP Short Form Guide 7 Issue : c www.leroy-somer.com Safe ty Info rm a tion Product info rm at io n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 1.4 Enviro...

Page 8 - Electrical installation; AC supply cables and connections

8 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 1.10 Electrical installation 1.10.1 Electric shock risk The voltages present in the following locations can cause severe electric shock and may be lethal: • AC supply cables and connections • Output cables and connections • Many internal par...

Page 9 - Product information; Introduction; Table 2-1 Model to frame size cross reference; Current ratings; Model

Mentor MP Short Form Guide 9 Issue : c www.leroy-somer.com S a fe ty Info rmatio n Prod uct inform a tion Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 2 Product ...

Page 11 - Model number; Mentor product line; Voltage rating; Mentor Platform; MP; quadrant operation

Mentor MP Short Form Guide 11 Issue : c www.leroy-somer.com S a fe ty Info rmatio n Prod uct inform a tion Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Table 2-4...

Page 12 - Nameplate description; Figure 2-2 Typical drive rating label; Output current; Mentor MP; Input current; Key to approvals

12 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 2.4 Nameplate description Figure 2-2 Typical drive rating label 2.4.1 Output current The continuous output current ratings given on the rating label are for maximum 40°C (104°F) and 1000m altitude. Derating is required for higher ambient te...

Page 13 - Drive features and options; Figure 2-3 Drive features and options on size 1; SMARTCARD operation; STORED CHARGE

Mentor MP Short Form Guide 13 Issue : c www.leroy-somer.com S a fe ty Info rmatio n Prod uct inform a tion Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 2.5 Drive...

Page 14 - Options available for Mentor MP; Table 2-5 Solutions Module identification

14 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 2.5.1 Options available for Mentor MP All Solutions Modules are color-coded in order to make identification easy. The following table shows the color-code key and gives further details on their function. Table 2-5 Solutions Module identific...

Page 16 - Table 2-6 Keypad identification; STO RED CHARG E

16 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 2-6 Keypad identification Table 2-7 Serial comms lead Table 2-8 External field control Fieldbus Purple SM-PROFIBUS DP-V1 Profibus option PROFIBUS DP adapter for communications with the drive Medium Grey SM-DeviceNet DeviceNet option D...

Page 17 - Items supplied with the drive; Table 2-9 Parts supplied with the drive; Description

Mentor MP Short Form Guide 17 Issue : c www.leroy-somer.com S a fe ty Info rmatio n Prod uct inform a tion Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 2.6 Items...

Page 18 - Mechanical installation; Safety

18 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 3 Mechanical installation 3.1 Safety Follow the instructionsThe mechanical and electrical installation instructions must be adhered to. Any questions or doubt should be referred to the supplier of the equipment. It is the responsibility of ...

Page 19 - Terminal cover removal; Removing the terminal covers; The drive is installed with one control terminal cover.; Figure 3-1 Removing the control terminal cover (size 1 shown)

Mentor MP Short Form Guide 19 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 3.2 T...

Page 20 - Mounting method; The Mentor MP can only be surface mounted.; Figure 3-3 Overall size 1A dimensions; The two outer holes must be used for mounting the Mentor MP.

20 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Place finger-guard on a flat solid surface and hit relevant break-outs with hammer as shown (1). Continue until all required break-outs are removed (2). Remove any flash / sharp edges once the break-outs are removed. 3.3 Mounting method The...

Page 21 - Figure 3-4 Overall size 1B dimensions

Mentor MP Short Form Guide 21 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figur...

Page 22 - Figure 3-5 Installing the mounting feet bracket on size 1 drives

22 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 3-5 Installing the mounting feet bracket on size 1 drives The bottom mounting bracket (1) should be installed to the back plate first with the screws fully tightened. The drive should then be lowered onto the bracket and slotted in. ...

Page 23 - Figure 3-6 Overall size 2A / 2B dimensions

Mentor MP Short Form Guide 23 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figur...

Page 24 - Figure 3-7 Size 2C front view and mounting dimensions

24 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 3-7 Size 2C front view and mounting dimensions 6mm (0.24in) 17 5 mm (6 .9 in) 5mm (0.2in) 175 mm (6 .9 in ) 405mm (15.94) 24 8m m (9.7 6in) 2 02m m (7.9 5in ) 321 m m ( 12.64 in) 605m m ( 2 3. 8 2 in) 12 4m m (4 .8 9in) 175 mm (6. 9 ...

Page 25 - Figure 3-8 Size 2C back-plate and mounting detail

Mentor MP Short Form Guide 25 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figur...

Page 26 - Figure 3-9 Size 2D front view and mounting dimensions

26 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 3-9 Size 2D front view and mounting dimensions 124m m (4.88i n) 6mm (0.24in) 1065mm ( 4 1 .93in ) 3 56mm (14.0 2 in) 248 mm (9 .76i n) 405mm (15.94in) 4mm (0.16in) 321m m (12.64i n) 330m m (13.0in) 555mm (21.85in) 3 30mm (13.0 in) 33...

Page 27 - Figure 3-10 Size 2D back-plate and mounting detail

Mentor MP Short Form Guide 27 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figur...

Page 28 - Figure 3-11 Mounting methods of size 2C / 2D air duct; The Mentor MP size 2C and 2D air duct can be turned 180; Installing and removing the terminal shrouds; Figure 3-12 Installing the terminal shrouds on size 1 drives

28 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 3-11 Mounting methods of size 2C / 2D air duct The Mentor MP size 2C and 2D air duct can be turned 180 ° to suit the customers infrastructure. 3.4 Installing and removing the terminal shrouds Figure 3-12 Installing the terminal shrou...

Page 29 - Figure 3-13 Removing the terminal shrouds on size 1 drives; Insert the screwdriver as shown.; Figure 3-14 Installing the terminal shrouds on size 2 drives; Assemble the cable to the busbar.

Mentor MP Short Form Guide 29 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n M e chanic al in s ta lla tio n E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 2. Pl...

Page 30 - Enclosure; Enclosure layout; Figure 3-15 Enclosure layout; To remove the terminal shrouds, please reverse the process above.

30 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 3.5 Enclosure Enclosure layout Please observe the clearances in the diagram below taking into account any appropriate notes for other devices / auxiliary equipment when planning the installation. Figure 3-15 Enclosure layout To remove the t...

Page 31 - Electric shock risk; AC supply cables and connections.; Isolation device; STOP function; For details on the MOV ground (earth) disconnect, refer to the

Mentor MP Short Form Guide 31 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 4 Elec...

Page 32 - Electrical connections; Figure 4-1 Power connections for 480V drive; Cable and fuse size ratings

32 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 4.1 Electrical connections Refer to Figure 4-1 to understand the function of the different power connections. Figure 4-1 Power connections for 480V drive 1. End user must provide 230 / 115Vac supply for the internal fans on frame sizes C an...

Page 33 - Ground connection; Figure 4-2 Location of ground connection on size 1 drives

Mentor MP Short Form Guide 33 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 4.1.1 ...

Page 34 - Figure 4-3 Location of ground connections on size 2A / 2B drives; AC supply requirements; An optional rating of 575Vrms is available for size 1 drives.

34 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 4-3 Location of ground connections on size 2A / 2B drives Figure 4-4 Location of ground connection on size 2C / 2D drives 4.3 AC supply requirements The standard drive is rated for a nominal supply voltage up to 480Vrms. An optional ...

Page 35 - Supply types; Table 4-1 Three phase AC supply; Line reactors; Specification; Maximum nominal supply

Mentor MP Short Form Guide 35 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 4.3.1 ...

Page 36 - Auxiliary AC supply and connections

36 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 4-2 Minimum required line inductance for a typical application (50% ripple content) 4.4.1 Auxiliary AC supply and connections Table 4-3 Terminal functions Table 4-4 Line to line supply Each drive has an onboard field controller with t...

Page 37 - Supply requirements; Control 24Vdc supply

Mentor MP Short Form Guide 37 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Table ...

Page 40 - Table 4-8 Typical cable sizes for size 2 drives; Derating factor of 0.88 is applied for 40

40 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 4-8 Typical cable sizes for size 2 drives * Values are beyond the mechanical design of the drive. At this power level it may be prudent to consider busbars. Notes for IEC 60364: Notes for US National Electrical Code: Model Maximum inp...

Page 41 - Ferraz Shawmut fuses; Ferraz Shawmut fuses are recommended for the Mentor MP.

Mentor MP Short Form Guide 41 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Table ...

Page 42 - Table 4-10 Ferraz Shawmut semiconductor fusing for size 1 drives; A50QS series are only rated up to 500Vac.

42 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 4-10 Ferraz Shawmut semiconductor fusing for size 1 drives Model International USA Description Catalogue number Ref number Description Catalogue number Ref number Field fuses 10 x 38mm Ferrule FR10GB69V1 2.5 H330011 10 x 38mm Ferrule ...

Page 44 - Field fuses

44 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 4-13 Ferraz Shawmut semiconductor fusing for International size 2 drives Model International Description Catalogue number Ref number Field fuses 10 x 38mm Ferrule FR10GB69V25 L330014 MP350A4 Square Body Fuses PC30UD69V500TF W300399 MP...

Page 47 - Table 4-17 Ferraz Shawmut DC protection fusing for size 2 drives; Alternative fusing

Mentor MP Short Form Guide 47 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Table ...

Page 48 - Internal field fuses; Figure 4-5 Removing the internal field fuses; Shield connections; Motor cables; Isolate the power before removing the internal field fuses.

48 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 4.6.3 Internal field fuses The internal field fuses provide protection to the field controller. The fuses can rupture if there is a fault in the field circuit. The user should check the internal field fuses if the drive is tripping field lo...

Page 49 - Figure 4-6 Shielded cable assembly; Control cables; Connecting the fan on size 2C and 2D drives; Figure 4-7 Fan connection

Mentor MP Short Form Guide 49 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figure...

Page 50 - Control connections; For the full terminal descriptions, refer to the; Status relay contacts are over-voltage category II.

50 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 4.9 Control connections Refer to Figure 4-8 to understand the connection of the different power connections. For the full terminal descriptions, refer to the Mentor MP User Guide. If the control circuits are to be connected to other circuit...

Page 51 - Figure 4-8 Default terminal functions

Mentor MP Short Form Guide 51 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation Elect ric a l in st al la tio n Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figure...

Page 52 - Serial communications connections; Figure 4-9 Serial communications port

52 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 4.9.1 Serial communications connections The Mentor MP has a serial communications port (serial port) as standard supporting two wire EIA(RS)-485 communications. Figure 4-9 Serial communications port Table 4-19 RJ45 connections The communica...

Page 53 - Getting started; Understanding the display; The red stop

Mentor MP Short Form Guide 53 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 5 Ge...

Page 54 - Keypad operation; Figure 5-3 Display modes

54 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 5.2 Keypad operation Control buttons The keypad consists of: 1. Joypad - used to navigate the parameter structure and change parameter values. 2. Mode button - used to change between the display modes – parameter view, parameter edit, statu...

Page 55 - Figure 5-4 Mode examples; Parameter; Status Mode; Saving parameters; Starting location

Mentor MP Short Form Guide 55 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Figu...

Page 56 - Figure 5-5 Sub block navigation; SEt UP

56 Mentor MP Short Form Guide www.leroy-somer.com Issue : c When moving to the user block header, the user block header is only displayed if there are some valid parameters in the block. When moving between pre-defined header blocks the pre-defined header block is only displayed if the pre-defined b...

Page 57 - Coding

Mentor MP Short Form Guide 57 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Codi...

Page 59 - Pre-defined sub blocks; Diagnostic

Mentor MP Short Form Guide 59 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 5.4 ...

Page 61 - IO; Mentor MP Advanced; Figure 5-6 Menu 0 copying

Mentor MP Short Form Guide 61 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g IO F...

Page 62 - Menu structure; Parameter access level and security; Figure 5-7 Menu structure; Advanced menus

62 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 5.6 Menu structure The drive parameter structure consists of menus and parameters. The drive initially powers up in sub menu mode. Once Level 2 access (L2) has been enabled (refer to Pr 11.44 ( SE14, 0.35 )) the left and right buttons are u...

Page 63 - Table 5-2 Advanced menu descriptions

Mentor MP Short Form Guide 63 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Tabl...

Page 64 - Procedure

64 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Table 5-3 Menu 40 parameter descriptions Table 5-4 Menu 41 parameter descriptions 5.8 Saving parameters When changing a parameter in Menu 0, the new value is saved when pressing the Mode button to return to parameter view mode from paramete...

Page 65 - Restoring parameter defaults; Differences between European and USA defaults; Displaying destination parameters only

Mentor MP Short Form Guide 65 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on G e tt ing st a rte d R u nnin g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 5.9 ...

Page 66 - User security open

66 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 5.13 Parameter access level and security The parameter access levels determine whether the user has access to Menu 0 (in sub block mode) only or to all of the advanced menus (Menus 1 to 23), in addition to Menu 0 (in linear mode). The user ...

Page 68 - Running the motor; Power connections for 480V drive; Motor rated; Drive control method

68 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 6 Running the motor This chapter takes the new user through all the essential steps to running a motor for the first time, in each of the possible operating modes. Table 6-1 Minimum control connection requirements for each control mode Refe...

Page 69 - Action; Incremental encoder basic set-up

Mentor MP Short Form Guide 69 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started Running the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g 6.1 Quick st...

Page 70 - Field controller set-up

70 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Set acceleration / deceleration rates Enter:• Acceleration rate in Pr 2.11 ( SE03, 0.24 ) (time to accelerate to maximum speed) • Deceleration rate in Pr 2.21 ( SE04, 0.25 ) (time to decelerate from maximum speed) Enable the field controlle...

Page 71 - Rotating autotune for motor field flux set-up

Mentor MP Short Form Guide 71 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started Running the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L lis tin g Rotating aut...

Page 74 - Figure 7-1 Installation of the SMARTCARD; Easy saving and reading; Table 7-1 SMARTCARD data blocks; Data block

74 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 7 SMARTCARD operation 7.1 Introduction This is a standard feature that enables simple configuration of parameters in a variety of ways. The SMARTCARD can be used for: • Parameter copying between drives • Saving whole drive parameter sets • ...

Page 75 - Transferring data; Table 7-2 Transferring data

Mentor MP Short Form Guide 75 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r S M AR T C AR D ope rati o n Adv a nce d par amet e rs Diagnos tic s U L lis tin g requi...

Page 76 - Advanced parameters; Menu 1: Speed reference; Menu 1 controls the main reference selection.; Figure 8-1 Menu 1 logic diagram

76 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8 Advanced parameters 8.1 Menu 1: Speed reference Menu 1 controls the main reference selection. Figure 8-1 Menu 1 logic diagram *Refer to Pr 1.14 ( SE05 , 0.26 ). Preset reference * selector Preset reference scan time Keypad Reference Preci...

Page 78 - Figure 8-2 Menu 2 logic diagram

78 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.2 Menu 2: Ramps The pre-ramp speed reference passes through the ramp block controlled by menu 2 before being used by the drive to produce input to the speed controller. The ramp block includes: linear ramps, and an S ramp function for ram...

Page 79 - Mentor MP User Guide.

Mentor MP Short Form Guide 79 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g ** For ...

Page 80 - Menu 3: Speed feedback and speed control; Speed accuracy and resolution; Digital reference resolution

80 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.3 Menu 3: Speed feedback and speed control Speed accuracy and resolution Digital reference resolution When a preset speed is used the reference resolution is 0.1rpm. Improved resolution can be obtained by using the precision reference (0....

Page 81 - Figure 8-3 Menu 3 logic diagram; applied to the speed loop gains when the flux is below 100%.

Mentor MP Short Form Guide 81 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g Figure ...

Page 82 - Menu 4: Torque and current control; Motor rated current is given by Pr; Figure 8-4 Menu 4 logic diagram

82 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.4 Menu 4: Torque and current control MOTOR1_CURRENT_LIMIT_MAX is used as the maximum for some parameters such as the user current limits. The current maximum current limit is defined as follows (with a maximum of 1000%): Where: Motor rate...

Page 84 - Menu 5: Motor and field control; Figure 8-5 Menu 5 armature control logic diagram

84 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.5 Menu 5: Motor and field control Figure 8-5 Menu 5 armature control logic diagram 5.03 Output power 5.02 Armature voltage 5.13 Continuous back end stop 5.01 Armature firing angle 5.11 Direct firing angle enable Menu 4 5.10 Direct firinga...

Page 86 - Figure 8-6 Menu 5 field control logic diagram

86 Mentor MP Short Form Guide www.leroy-somer.com Issue : c Figure 8-6 Menu 5 field control logic diagram 5.59 Back emf set-point 5.02 Armature voltage + _ + _ 5.52 IRdrop 5.61 Armatureresistance 4.02 Filtered current magnitude 5.53 Backemf 5.59 Back emf set point 1 5.08 Base speed Voltage error to ...

Page 88 - Menu 6: Sequencer and clock; Figure 8-7 Menu 6 logic diagram

88 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.6 Menu 6: Sequencer and clock Figure 8-7 Menu 6 logic diagram 6.15 6.30 6.31 6.32 6.33 6.42 6.34 6.37 Logic 1 6.12 Keypad STOP key enable 6.13 Keypad reverse key function 2.02 Ramp enable/disable 3.23 Hard speedreference disable 13.10 Pos...

Page 89 - Figure 8-8 Menu 7 logic diagram

Mentor MP Short Form Guide 89 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g 8.7 Men...

Page 90 - Figure 8-9 Menu 8 logic diagram

90 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.8 Menu 8: Digital I/O Figure 8-9 Menu 8 logic diagram 8.32 ??.?? ??.?? ??.?? ??.?? 8.22 x(-1) x(-1) 8.12 8.02 8.33 ??.?? ??.?? ??.?? ??.?? 8.23 x(-1) x(-1) 8.13 8.03 8.29 8.30 8.29 8.30 10.33 6.30 8.31 ??.?? ??.?? ??.?? ??.?? 8.21 x(-1) x...

Page 93 - Menu 9: Programmable logic, motorized pot and binary sum; Figure 8-12 Menu 9 logic diagram: Programmable logic

Mentor MP Short Form Guide 93 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g 8.9 Men...

Page 95 - Menu 10: Status and trips

Mentor MP Short Form Guide 95 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g 8.10 Me...

Page 99 - Figure 8-16 Menu 12 Brake control function

Mentor MP Short Form Guide 99 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g Figure ...

Page 100 - Menu 13: Position control

100 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.13 Menu 13: Position control Figure 8-18 Menu 13 logic diagram 3.28 3.29 Revolution counter Position DriveEncoder 15.04 15.05 15.06 Slot 1 16.04 16.05 16.06 Slot 2 17.04 17.05 17.06 Slot 3 13.20 13.21 13.22 Localreference 13.23 Localrefe...

Page 102 - Menu 14: User PID controller

102 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.14 Menu 14: User PID controller Figure 8-19 Menu 14 logic diagram ??.?? ??.?? 14.19 14.02 ??.?? ??.?? 14.20 14.03 ??.?? ??.?? 14.21 14.04 14.07 + _ 14.22 ??.?? ??.?? 14.09 10.01 14.08 & Any variableparameter Any variableparameter Any...

Page 103 - *The PID controller is only enabled if Pr

Mentor MP Short Form Guide 103 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g *The P...

Page 104 - Menus 15, 16 and 17: Solutions Module slots; Solutions Module User Guide

104 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.15 Menus 15, 16 and 17: Solutions Module slots Pr x.00 and Pr x.01 are always present in menus 15, 16 and 17. Pr x.01 indicates which type of module is present (0 = no module installed). When a module is installed the drive provides the ...

Page 105 - Menu 21: Second motor parameters

Mentor MP Short Form Guide 105 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Advan ced p a ram e te rs Diagnos tic s U L lis tin g 8.16 M...

Page 106 - Menu 23: Header selections

106 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 8.18 Menu 22: Additional Menu 0 set-up 8.19 Menu 23: Header selections Parameter 22.01 Pr 0.01 set-up 22.02 Pr 0.02 set-up 22.03 Pr 0.03 set-up 22.04 Pr 0.04 set-up 22.05 Pr 0.05 set-up 22.06 Pr 0.06 set-up 22.07 Pr 0.07 set-up 22.08 Pr 0....

Page 107 - Trip indications; Table 9-1 Trip indications; Trip

Mentor MP Short Form Guide 107 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Dia gnos tics UL li stin g 9 Diagn...

Page 110 - Alarm indications; Table 9-2 Alarm indications

110 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 9.2 Alarm indications In any mode an alarm flashes alternately with the data displayed on the 2nd row when one of the following conditions occur. If action is not taken to eliminate any alarm except "Autotune", and "PLC" th...

Page 111 - Status indications; Table 9-3 Status indications; Trip masking; Mentor MP Advanced User Guide

Mentor MP Short Form Guide 111 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Dia gnos tics UL li stin g 9.3 Sta...

Page 112 - UL listing; Common UL Information; Motor overload protection; AC supply specification

112 Mentor MP Short Form Guide www.leroy-somer.com Issue : c 10 UL listing Mentor MP frame size 1 drives have been assessed to comply with both ULus and cUL requirements. LEROY-SOMER UL file number is E171230. Confirmation of UL listing can be found at website: www.ul.com 10.1 Common UL Information ...

Page 113 - Safety label; SM-Universal Encoder Plus

Mentor MP Short Form Guide 113 Issue : c www.leroy-somer.com S a fe ty Info rmatio nP ro duct info rm a tio n Mecha n ic al in s ta llation E lectr ical in s tal la ti on Getti ng started R u n n in g the mo to r SMAR T C ARD o per at io n Adv a nce d par amet e rs Diagnos tic s U L l is ting 10.3 S...