Emerson EVC1700- Manuals

Page 4 - System requirements

4 3. When left idle for long periods, remove the battery from your digital video camera and store it in a dry and dark place. Miscellaneous: 1. When switching video output between LCD display and video devices, be sure to exit from the „play‟ or „record‟ state. 2. This digital video camera is suitab...

Page 5 - Memories on TV 4 Software; Intel Pentium II 300mHz or faster

5 Memories on TV 4 Software The below chart is the minimum system requirements for the Memories on TV 4 software which is also included in the giftbox: Operation System Microsoft Windows XP, Vista, Windows 7 CPU Intel Pentium II 300mHz or faster Memory 64 MB RAM (128 MB Preferred) Sound card and dis...

Page 6 - Getting to know your camera; Appearance and Buttons

6 Getting to know your camera 1. Appearance and Buttons

Page 8 - Basic operation; Installing the battery; to charge the battery.; The busy light is located on the top of the

8 2. Basic operation 2.1 Installing the battery Press / slide down the battery cover and insert the included lithium battery. Align with correct polarity (+,-) of battery terminals. Close the battery cover. 2.2 Charging the battery 1. Power off the camera. 2. Connect the camera to the computer USB p...

Page 9 - hours under normal usage.; Video record

9 4. Charge the camera for about 3 hours to get maximum battery power. Battery lasts as long as 2 hours under normal usage. 2.3 Using a SD/MMC/SDHC card Turn your camcorder OFF before inserting / removing an SD Card. Insert a memory card into the SD/MMC/SDHC card slot. Push it down until the card st...

Page 10 - Playback videos or photos

10 Your camera will automatically go to record mode after it is powered on. To record a video, press the shutter key to start video recording. While recording, press the shutter key again to stop recording. In video record mode ， to change the resolution from 720p HD to VGA 640/480 and vice versa, p...

Page 11 - Still photos

11 2.7 Still photos Press the Mode key to switch from playback mode to still photo mode (5MP). Press the left key to turn the Led light on or off. In still photo mode, press the shutter key to take a picture. Press the up or down key to zoom in or out of the image. 2.8 Video output After the camera ...

Page 14 - Format; Erase all data on the installed memory card.; Reset All; Reset all user preferences to defaults.; Light Frequency; When in record or still mode, press the menu key.

14 Format Erase all data on the installed memory card. Reset All Reset all user preferences to defaults. Light Frequency Do not change the frequency from 60 Hz (default) unless you are outside of the United States. To change the frequency, click the Menu button to see your setup options. Press the r...

Page 16 - confirm your action of resetting all of the preferences.

16 USB Your USB is set to Computer mode. This means that your computer will recognize your digital video camera when you plug it into the USB port of your computer. To change from Computer Mode to Printer mode, press the Menu Key to see your setup options. Press the Right key and scroll down to the ...

Page 17 - Install MediaImpression:

17 Application of attached Software 1. Introduction interface for software installation Put the CD into the CD-ROM of a computer, and then the following menu will appear:  If the above screen does not show up, click the autorun.exe program under the directory of the CD. 2. MediaImpression Installat...

Page 20 - Choose the video camera storage and choose the output location.

20 Choose the video camera storage and choose the output location.

Page 23 - UEZ Link Introduction and Use

23 3. UEZ Link Introduction and Use UEZ Link can help you easily upload your videos or photos to or . There are two ways to use the software: Ⅰ When connecting to a PC, UEZ link will pop-up automatically. Please make sure that your PC will not block any pop-up software. Otherwise it will not work. Ⅱ...