Emerson CF955WW 00 - Manuals

Page 2 - Safety Instructions; Additional Safety Instructions for Installation; WARNING; The date code of this fan may be found on

2 WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to p...

Page 3 - This Manual Is Designed to Make it as Easy as Possible for You to; Tools Needed for Assembly; One Phillips head screwdriver; MATERIALS; Unpacking Instructions; Installed Wire Length

1. Check to see that you have received the followingparts: NOTE: If you are uncertain of part description,refer to exploded view illustration. a. Fan motor assemblyb. One lower housing assemblyc. One ceiling coverd. Five fan bladese. One hanger ball/downrod assemblyf. One hanger bracketg. One glass ...

Page 4 - How to Put Your Ceiling Fan Together

1. Remove the hanger ball by loosening the setscrewin the hanger ball until the ball falls freely down thedownrod (Figure 1). Remove the clevis pin from thedownrod, then remove the hanger ball. Retain thepin and hanger ball for reinstallation in step 5. 2. Loosen setscrew in motor coupling if necess...

Page 5 - Electrical Requirements; How to Hang Your

NOTE: Take care not to scratch fan housing wheninstalling blades. 9. R e m o v e t w o o f t h e f o u r s c r e w s i n t h e m o t o rassembly and loosen the remaining two screws(Figure 6). 10. C o n n e c t t h e t e r m i n a l s o f t h e l o w e r h o u s i n ga s s e m b l y t o t h e t e r m...

Page 6 - How to Wire

6 2. Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that wasjust attached to the outlet box (Figure 10). Be surethe groove in the ball is lined up with tab on thehanger bracket (Figure 9). OUTLETBOX HANGERBRACKET HANGER BALL/DOWNROD ASSEMBLY NOTE: CEILING COVE...

Page 7 - Setting Transmitter Frequency; R e p l a c e m e n t b a t t e r i e s f o r t r a n s m i t t e r :; Installing Lamps and

Preset Memor y Feature Your Emerson remote control receiver is equippedwith a preset memory feature. If the electrical supplyto the receiver is controlled through a wall switch,w h e n t h e s w i t c h i s t u r n e d o f f , t h e c o n t r o l w i l lremember the light intensity and fan speed. Wh...

Page 8 - Operation of Your

IMPORTANT F a n i n s t a l l a t i o n a n d p r o g r a m m i n g o f t h eelectronic controls must be completed, includingthe installation of the fan blades, before testing ofthe remote control. Your remote control has full control of your fan andlights. 1. To set the desired fan speed, press the...

Page 9 - Trouble Shooting; FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER

9 Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, or loose 2. Check line wire connections to fan and switch wire switch wire conne...

Page 10 - Maintenance

IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan Periodic cleaning of your new ceiling fan is the onlymaintenance that is needed. When cleaning, use only a soft brush or lint free clothto avoid scratching the finish. Abrasive cleaning agents are not required and shouldbe avoided to prevent damage to...

Page 11 - Repair Par ts

11 9 4 15 11 6 1 2 3 7 5 14 8 17 16 12 19 10 13 18 3 4 1 6 2 5 Repair Par ts U.L. Model No.: CF955

Page 12 - Repair Par ts Listing; Air Comfort Products

Key Model Numbers No. Description CF955BS 00 CF955ORB 00 CF955WW 00 — Hanger Ball Assembly, 761655-17 761655-32 761655 Consisting of: 1 Hanger Bracket — — — 2 Hanger Ball — — — 3 Downrod — — — — Parts Bag Containing: 762029-2 762029-1 762029-2 4 Wire Connector (3) — — — 5 Stud, Threaded, 1-1/4" ...