Emerson CF930BS01 - Manuals

9 2. Carefully lift the fan and seat thehanger ball/downrod assembly on thehanger bracket that was just attachedto the outlet box (Figure 12). Be surethe groove in the ball is lined up withthe tab on the hanger bracket(Figure 11). Hanger bracket must seat firmly againstoutlet box. If the outlet box ...

Do not connect any neutral (white) wire tothis control. Incorrect wiring will damagethis control. ! WARNING 12 Installation of Wall Control SINGLE-POLE INSTALLATION (Figure 19) 1. Disconnect power at circuit breaker orremove fuse. 2. Remove faceplate and screws fromexisting wall control. Pull contro...

14 STANDARD WIRING FOR EXISTING3-WAY CONTROL: HOT BLK FAN/LIGHTWALL CONTROL BLK TRAVELER WIRES BLK BLK BLACK LOAD BLACK LOAD TRAVELER WIRES HOT BLK EXISTING WALL CONTROL EMERSON ® EMERSON ® HI MED LOW FAN OFF LIGHT ON OFF HI MED LOW FAN OFF LIGHT ON OFF Figure 22 Operating Your Ceiling Fan IMPORTANT...

1. Downrod Extension Kits (see store orcatalog). 2. Ceiling Fan Controls (see store orcatalog). 3. Blades (see store or catalog). 15 Do not use water when cleaning yourceiling fan. It could damage the motor orthe blades and create the possibility of anelectrical shock. ! WARNING The use of any other...

18 Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Fuse or circuit breaker 1. Check main and branch start. blown. circuit fuses or circuit breakers. WARNING: Make sure main power is turned off. 2. Loose power line 2. Check line power connections connections to the fan. to...

19 LIMITED WARRANTY What The Warranty Covers:This warranty covers the motor and the other components and accessories of your Emerson Electric Co. ceilingfan against all defects in workmanship and materials. You must be the original purchaser or user of the productto be covered.What The Period Of Cov...