Emerson CF2455ORB00- Manuals

Emerson CF2455ORB00– User Manual, Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 2 - The date code of this fan may be found on

2 WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting m...

Page 3 - MATERIALS; Installed Wire Length; Unpacking Instructions; WARNING; Open styrofoam unit containing fan. Remove upper; Tools Needed for Assembly

7. Seven wire connectors8. Three 8-32 x 3/8" phillips head screws9. One hairpin clip 10. One clevis pin11. Two knurled knob screws12. Twenty-one 10-32 x 3/8" pan head screws13. One jumper assembly NOTE: Place the parts from the loose parts bagsin small containers to keep them from being lost...

Page 4 - Figure 1; Electrical Requirements; Preliminary Procedures; a. Set the operating frequency of the fan/light wall

1. Position the fan motor and housing assembly in the lower styrofoam packing so that the top for themotor is facing you. 2. Obtain the hanger ball/downrod assembly and remove the hanger ball by loosening the setscrewin the hanger ball until the ball falls freely down thed o w n r o d ( F i g u r e ...

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 2 - The date code of this fan may be found on

2 WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting m...

Page 3 - MATERIALS; Installed Wire Length; Unpacking Instructions; WARNING; Open styrofoam unit containing fan. Remove upper; Tools Needed for Assembly

7. Seven wire connectors8. Three 8-32 x 3/8" phillips head screws9. One hairpin clip 10. One clevis pin11. Two knurled knob screws12. Twenty-one 10-32 x 3/8" pan head screws13. One jumper assembly NOTE: Place the parts from the loose parts bagsin small containers to keep them from being lost...

Page 4 - Figure 1; Electrical Requirements; Preliminary Procedures; a. Set the operating frequency of the fan/light wall

1. Position the fan motor and housing assembly in the lower styrofoam packing so that the top for themotor is facing you. 2. Obtain the hanger ball/downrod assembly and remove the hanger ball by loosening the setscrewin the hanger ball until the ball falls freely down thed o w n r o d ( F i g u r e ...

Emerson Manuals