Emerson BP7251- Manuals

Page 2 - WARNING; Safety Instructions; The date code of this fan may be found on

2 WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting ...

Page 3 - Open carton containing your ceiling fan. Remove; This Manual Is Designed to Make it as Easy as Possible for You to; Tools Needed for Assembly; One Phillips head screwdriver; MATERIALS; Unpacking Instructions; Installed Wire Length

1. Open carton containing your ceiling fan. Remove the top half of the styrofoam packing. Removeparts and check to see that you have received thefollowing: a. Fan motor and shade assemblyb. One motor coverc. One ceiling coverd. Five blade flangese. One hanger ball/downrod assemblyf. One hanger brack...

Page 4 - Electrical Requirements

If your fan is to replace an existing ceiling light fixture,turn electricity off at the main fuse box at this timeand remove the existing light fixture. Turning off wall switch is not sufficient. To avoidpossible electrical shock, be sure electricity is turnedoff at the main fuse box before wiring. ...

Page 5 - SECTION A; Assembly Instructions for Installing the

5 SECTION A Assembly Instructions for Installing the CF2600 and CF2650 Ceiling Fan with the Emerson SR330 Remote Control or the SW350 Wall Control 1. Obtain the hanger ball/downrod assembly and remove the hanger ball by loosening the setscrewin the hanger ball until the ball falls freely down thedow...

Page 6 - Position the ceiling cover over the downrod. Be

6 11. Fold the wires from the downrod into the slot in the motor coupling (Figure 5A). Then slide thedownrod down the wires and seat the downrod inthe motor coupling. 12. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pinand secure with the hairpin...

Page 7 - Securely attach the hanger bracket to the outlet; Figure 2; C a r e f u l l y l i f t t h e f a n a n d s e a t t h e h a n g e r; Figure 3

7 DOWNROD PIN HANGER BALL CEILING COVER Figure 9A 17. Screw in four 60-watt (maximum) candelabra base lamps in the housing sockets (Figure 10A). Graspthe sockets and pivot them until the lamp bulbs areeven with the top of the housing as shown. This willprovide the optimum lighting effect. 18. Secure...

Page 9 - Install two candelabra base lamps in the sockets of

31. Using the 5/64” hex wrench (supplied), loosen the s e t s c r e w i n t h e c o l l a r o n t h e l i g h t k i t a d a p t e rassembly. Then pass the connectors and the wiresfrom the motor shaft through the collar (Figure 18A).Screw the adapter assembly onto the motor shaftand then tighten the ...

Page 10 - SECTION B; Assembly Instructions for Installing the CF2600 and CF2650

8. Install the setscrew (supplied) in the motor coupling a n d t i g h t e n u s i n g t h e 5 / 3 2 ” s e t s c r e w w r e n c h(supplied) (Figure 3B). 9. Screw two 1” threaded studs (provided) into the motor (Figure 4B). Leave approximately 7/8” of thestud extending above the motor. Coil the wire...

Page 14 - Installation of the Decorative Support Rods Assembly; L o o s e n t h e s e t s c r e w i n t h e c o l l a r o f t h e r o d; R a i s e t h e r o d s u p p o r t a s s e m b l y a n d l o o s e l y

14 Installation of the Decorative Support Rods Assembly N O T E : T h e f o l l o w i n g p r o c e d u r e s a r e t o b eperformed only if you have installed the 18” orlonger downrod. 1. L o o s e n t h e s e t s c r e w i n t h e c o l l a r o f t h e r o d support assembly using the 5/64” hex wr...

Page 15 - Using Your Ceiling Fan; R e s t o r e e l e c t r i c a l p o w e r t o t h e o u t l e t b o x b y; turning the electricity on at the main fuse box.; Check the operation of the fan and lights by using; the wall controls or the remote control.; If airflow is desired in the opposite direction, turn; Maintenance; IMPORTANT CARE INSTRUCTIONS; Accessories; Trouble Shooting; HOW TO ORDER REPAIR PARTS

15 Using Your Ceiling Fan 1. R e s t o r e e l e c t r i c a l p o w e r t o t h e o u t l e t b o x b y turning the electricity on at the main fuse box. 2. Check the operation of the fan and lights by using the wall controls or the remote control. 3. If airflow is desired in the opposite direction,...

Page 16 - Air Comfort Products

Printed in Taiwan 04/03Part No. F40BP72510004 Form No BP7251-4 Repair Par ts Listing Raphael Part Numbers Raphael II Part Numbers K e y Model No. Model No. Model No. Model No. Model No. Model No. N o. Description CF2600AB01 CF2600WB01 CF2600PW01 CF2650BC01 CF2650WB01 CF2650PW01 1 Hanger Bracket Asse...