Emerson 648B- Manuals

Page 2 - Quick Installation Guide; Rosemount 648 Wireless; Explosions could result in death or serious injury:; IMPORTANT NOTICE; Shipping considerations for wireless products:; Rosemount Temperature GmbH

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 2 © 2012 Rosemount Inc. All rights reserved. All marks property of owner. IMPORTANT NOTICE This installation guide provides basic guidelines for the Rosemount ® 648. It does not provide instructions for detailed co...

Page 3 - IRELESS; Power Up Sequence

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 3 W IRELESS C ONSIDERATIONS Power Up Sequence The Rosemount 648 and all other wireless devices should be installed only after the Smart Wireless Gateway (“Gateway”) has been installed and is functioning properly. Wi...

Page 4 - Field Communicator Connections; TEP; approved thread sealant on all connections.

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 4 Field Communicator Connections The Power Module needs to be installed in the device for the Field Communicator to interface with the 648. Field communication with this device requires a Field communicator using t...

Page 5 - Position the antenna such that it is; vertical; , either straight up or straight down. The; Remote Mount

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 5 S TEP 1 CONTINUED ... 5. Close the housing cover and tighten to safety specification. Always ensure a proper seal by installing the electronics housing covers so that metal touches metal, but do not over tighten. ...

Page 6 - Position the antenna such that it is; Local Display; button to display the

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 6 S TEP 1 CONTINUED ... 6. Close the housing cover and tighten to safety specification. Always ensure a proper seal by installing the electronics housing covers so that metal touches metal, but do not over tighten....

Page 7 - Field Communicator; Smart Wireless Gateway; In the integrated web interface from the Gateway, navigate to the; Network; Radio

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 7 Field Communicator To verify operation using a Field Communicator, refer to the Fast Key Sequence in Table 1. Select the Radio State parameter to verify operation. For connecting to a Field Communicator, refer to ...

Page 8 - AMS; page on the web server (see Figure 4: Smart Wireless Gateway; Function; Network ID; Radio State

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 8 AMS ™ Suite: Intelligent Device Manager When the device has joined the network, it will appear in the Device Manager as illustrated below. Troubleshooting If the device is not joined to the network after power up...

Page 9 - EFERENCE; Device Information

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 9 R EFERENCE I NFORMATION Figure 5. Rosemount 648 Terminal Diagram NOTE:In order to communicate with a Field Communicator, the device must be powered by connecting the Power Module. Table 2. 648 Fast Key Sequence Fu...

Page 11 - RODUCT; Emerson Process Management complies with the ATEX Directive.

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 11 P RODUCT C ERTIFICATIONS Approved Manufacturing Locations Rosemount Inc. – Chanhassen, Minnesota, USAEmerson Process Management GmbH & Co. - Karlstein, GermanyEmerson Process Management Asia Pacific Private L...

Page 12 - Hazardous Locations Certificates; North American Certifications; N5 FM Non-incendive and Dust Ignition-proof

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 12 Hazardous Locations Certificates North American Certifications Factory Mutual (FM) Approvals I5 FM Intrinsically Safe, Non-incendiveIntrinsically Safe for Class I/II/III, Division 1, Groups A, B, C, D, E, F, and...

Page 13 - European Certifications; International Certifications; rubbed or cleaned with a dry cloth.; Sensor

Quick Installation Guide 00825-0100-4648, Rev CCFebruary 2012 Rosemount 648 Wireless 13 European Certifications I1 ATEX Intrinsic SafetyCertificate No.: Baseefa07ATEX0011X II 1G Ex ia IIC T5 (T a = -60 °C to 40 °C) Ex ia IIC T4 (T a = -60 °C to 70 °C) IP66/IP67 Special Conditions for Safe Use (X) 1....

Page 14 - Japanese Certifications; End users are not permitted to change any components insides.

Quick Installation Guide 00825-0100-4648, Rev CC February 2012 Rosemount 648 Wireless 14 Japanese Certifications I4 TIIS Intrinsic SafetyEx ia IIC T4Certificate TC18194. Various configurations available. Consult factory for certified assemblies. China (NEPSI) Certifications I3 China Intrinsic Safety...