Emerson 4.21 - Manuals

2 SYSTEM REQUIREMENTS DANIEL CUI About this Manual MAR 2008 2. SYSTEM REQUIREMENTS This section lists the system requirements needed to run Daniel CUI. Ensure that your personal computer (PC) system has the minimum system requirements described below. • PC with a 133MHz Pentium or higher processor (...

DANIEL CUI INSTALLATION INSTRUCTIONS 3 DANIEL CUI MAR 2008 Installing Daniel CUI 3. DANIEL CUI INSTALLATION INSTRUCTIONS 3.1 Installing Daniel CUI Perform the following steps to install Daniel CUI: 1. Make sure you have Administrative rights before proceeding. If you are not sure, continue and the i...

4 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing Daniel CUI MAR 2008 For Windows XP and 2000 • From the Windows® task bar (lower left corner), click the Start button, then select Run . The Run window displays ( see Figure 3-1 ). Figure 3-1 Start>Run Window • Type the path and file nam...

DANIEL CUI INSTALLATION INSTRUCTIONS 5 DANIEL CUI MAR 2008 Installing a Direct Connection Driver 3.2 Installing a Direct Connection Driver For Daniel Mark III Gas Ultrasonic Meter or a Daniel Liquid Ultrasonic Meter Perform the following steps to install the Daniel Direct Connection driver in order ...

6 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 This is necessary due to a limitation in the Microsoft® Dial-up Networking that will prevent it from working correctly if multiple drivers are assigned to the same COM port. To delete any drivers, select...

DANIEL CUI INSTALLATION INSTRUCTIONS 7 DANIEL CUI MAR 2008 Installing a Direct Connection Driver 6. On the second page of the wizard, select (Standard Modem Types) under Manufacturer and Communications cable between two computers under Models . Click the Next button to continue. Figure 3-5 Install N...

8 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 8. When the driver is successfully installed, click the Finish button to close the wizard. Figure 3-7 Driver Installation Complete 9. The Communications cable between two computers driver will now appear...

DANIEL CUI INSTALLATION INSTRUCTIONS 9 DANIEL CUI MAR 2008 Installing a Direct Connection Driver 3.2.2 Instructions for Windows Vista™ 1. From the task bar at the bottom of the screen click on the Start button and select Control Panel . 2. Now, double-click on the icon Phone and Modems Options . 3. ...

10 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 5. On the first page of the wizard, select the check box "Don't detect my modem; I will select it from a list" and click on the Next button to continue. Figure 3-10 Detect My Modem Dialog 6. On ...

DANIEL CUI INSTALLATION INSTRUCTIONS 11 DANIEL CUI MAR 2008 Installing a Direct Connection Driver 7. Enter the installation directory for Daniel CUI, under "Copy manufacturer's files from:" (the default installation directory is typically C:\Program Files\Daniel\Daniel CUI ). Click on the Br...

12 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 9. Select the Selected ports radio button and select only the desired ports you wish to use to communicate with a Daniel Mark III Gas Ultrasonic Meter or a Daniel Liquid Ultrasonic Meter. Click on the N...

DANIEL CUI INSTALLATION INSTRUCTIONS 13 DANIEL CUI MAR 2008 Installing a Direct Connection Driver 11. The Daniel Direct Connection driver will now appear in the Modem list. Multiple instances of the driver will appear, if it was installed for multiple COM ports. Click on the OK button to close the d...

14 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 2. For Windows® XP only, if the Control Panel looks like the dialog below, click the Printers and Other Hardware icon . Figure 3-17 Windows® XP Control Panel 3. Now, double-click the icon Phone and Mode...

16 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 7. On the second page of the wizard, select (Standard Modem Types) under Manufacturer and Communications cable between two computers under Models . Click the Next button to continue. Figure 3-21 Install...

18 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installing a Direct Connection Driver MAR 2008 3.2.4 Obtaining Hotfixes for Microsoft® Windows® 1. If you are using an English North American version of Windows® 2000, the Hotfixes can be found on the Daniel CUI Installation CD under a directory cal...

DANIEL CUI INSTALLATION INSTRUCTIONS 19 DANIEL CUI MAR 2008 Uninstalling Daniel CUI 3.3 Uninstalling Daniel CUI Uninstall Using Windows® XP or Windows 2000 Perform the following steps to uninstall Daniel CUI: 1. From the task bar at the bottom of the screen, click the Start button. Use the Settings&...

20 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Uninstalling Daniel CUI MAR 2008 3. The Add/Remove Program Properties window displays. Figure 3-26 Add/Remove Program Properties Use the scroll bar and then select Daniel CUI. click the Add/Remove button. 4. Windows® displays the Confirm File Deleti...

21 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Uninstalling Daniel CUI MAR 2008 Uninstall Using Windows Vista™ Perform the following steps to uninstall Daniel CUI:1. From the task bar at the bottom of the screen, click on the Start button. Use the Start>Control Panel menu path for Windows Vis...

22 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Uninstalling Daniel CUI MAR 2008 Select Daniel CUI from the programs list, then click on the Uninstall/ Change button. If you get the Users Account Control dialog, click the Continue button to proceed with the InstallShield wizard or click the Cance...

23 DANIEL CUI INSTALLATION INSTRUCTIONS DANIEL CUI Installation Troubleshooting Tips MAR 2008 3.4 Installation Troubleshooting Tips Before installing Daniel CUI, shut down all Windows® programs, including any virus checking programs. Most virus checking software has little or no impact on the instal...

DANIEL MEASUREMENT AND CONTROL, INC. RETURN POLICY FOR WARRANTY AND NON-WARRANTY MATERIAL Use the following procedure for returning equipment to the Daniel factory in the United States. Step 1 Obtaining a RMA Number A Return Material Authorization (RMA) number must be obtained prior to returning any...

Step 3 Material Safety Data Sheets (MSDS) Provide a Material Safety Data Sheet (MSDS) with the returned equipment for each substance that has come in contact with the equipment being returned, including substances used for decontamination and cleaning. A MSDS sheet is required by law to be available...

DANIEL MEASUREMENT AND CONTROL, INC. RETURNED MATERIAL AUTHORIZATION Repair Form for Used Equipment Including Decontamination/Cleaning Statement 1. Return Material Authorization (RMA) Number____________________________ 2. Equipment to be returned: Model Number ___________________ Serial Number _____...

Shipping Requirements Failure to comply with this procedure will result in the shipment being refused. 4. Write the RMA number on the shipping package. 5. Inside the package include one copy of this document and all required Material Safety Data Sheets (MSDS) 6. Outside of the package attach one cop...

WARRANTY 1. LIMITED WARRANTY: Subject to the limitations contained in Section 2 herein, Daniel Measurement & Control, Inc. ("Daniel") warrants that the licensed firmware embodied in the Goods will execute theprogramming instructions provided by Daniel, and that the Goods manufactured by ...