Emerson 214A404 - Manuals

Emerson 214A404 – Manual in PDF format online.

Manuals:

Manual Emerson 214A404

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Serial Communications; INSTALLATION; label holder labels; Mounting; Outline and Installation; Connecting Slave ATS Annunciators; Outline

1 Serial Communications Serial communications permits large amounts of information to be processed over a few wires. In the serial communications systems used by ASCO, each individual device in the system --- automatic transfer switch, bypass-isolation switch, ATS annunciator, etc. --- has a unique ...

Page 3 - Power Wiring; To prevent damage do not; Communication Wiring; Located on right side of circuit board.; Networks for Interconnecting ATS Annunciators and ATSs

2 INSTALLATION (continued) Power Wiring The Master ATS Annunciator can be powered by either an ac or dc source (but not both) as shown on the Outline and Installation drawing 387797 and in Figure 3. For ac wiring use a Class 2 bell transformer with a 120 V ac primary and a 16 V ac secondary (12 VA m...

Page 4 - SETTING UP THE ATS ANNUNCIATORS; Set Number of Masters and Master Address; ON; Set Number of Slaves

3 SETTING UP THE ATS ANNUNCIATORS Catalog 214A400, 214A404 Master ATS Annunciators Catalog 214A401 Slave ATS Annunciator Master ATS Annunciator factory default settings Slave ATS Annunciator factory default settings Figure 5. DIP switches in Master. Figure 6. DIP switches in Slave. Before applying p...

Emerson Manuals