ECHO X767000193 - Manuals

ECHO X767000193 – Manual in PDF format online.

Manuals:

Manual ECHO X767000193

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24

Summary

Page 3 - • Measure PTO shaft. If shaft is 32 mm, proceed to step 2. If; IMPORTANT; fixing plate assembly.; PTO

3 b lade c onversion k it i nstallation i nstructions 2. Loosely attach bracket (D) to shield (E) and attach shield to bottom of gear housing (F) with hardware provided. 3. Remove gearcase clamping screws (G) and loosely attach bracket (D) to gearcase (F) with 2 - 5x35mm screws, nuts and lockwashers...

Page 4 - wise on PTO shaft to tighten.; X or Y

install harness clamp NOTE Some models require installation of harness clamp. If your unit does not have a clamp follow these directions. 1. Remove shield and gear housing as an assembly. a. Loosen two (2) screws (M) that clamp the gear housing to the shaft. b. Remove locating screw (N) at the top o...

Page 5 - SRM’s with 4-screw front handles; NOTE

install handle / barrier bar NOTE The Barrier Bar is required when using grass or weed blades. Units equipped with U-Handles do not require installation of the Barrier Bar. SRM’s with 4-screw front handles 1. Position front handle on shaft and install Barrier Bar using four (4) 5x35 mm screws and (4...

ECHO Manuals