ECHO SRM-3020 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS SRM-3020 2 X7502350000 © 04/2018 ECHO Inc. TABLE OF CONTENTS Table of Contents ........................................................................................ 2Introduction ................................................................................................. 4S...

Page 4 - INTRODUCTION; For questions regarding terms used in this manual, visit:; SERVICING INFORMATION; Service

INTRODUCTION SRM-3020 4 X7502350000 © 04/2018 ECHO Inc. INTRODUCTION This product was designed and manufactured to provide long life and on-the-job dependability. Read and understand all provided literature. Keep manuals in a safe place for future reference. Literature contains specifications and in...

Page 5 - SAFETY; Manual Safety Symbols and Important Information

SRM-3020 SAFETY X7502350000 5 © 04/2018 ECHO Inc. ENGLISH ECHO Consumer Product Support If you require assistance or have questions concerning the application, operation, or maintenance of this product, call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:00 am to 5:00 pm (Cent...

Page 6 - Note: This enclosed message provides tips for use, care and; International Symbols

SAFETY SRM-3020 6 X7502350000 © 04/2018 ECHO Inc. The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided. The enclosed message provides information necessary for the protection of the unit. N...

Page 8 - Physical Condition; Your judgment and physical dexterity may not be good:

SAFETY SRM-3020 8 X7502350000 © 04/2018 ECHO Inc. Personal Condition and Safety Equipment Cancer and Reproductive Harmwww.P65Warnings.ca.gov The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal inju...

Page 9 - Eye Protection

SRM-3020 SAFETY X7502350000 9 © 04/2018 ECHO Inc. ENGLISH Operate unit only if you are physically and mentally well. Eye Protection ◆ Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. ◆ For additional safety, a full-face shield may be worn over safet...

Page 10 - Extended Operation / Extreme Conditions; • Keep your body warm, especially

SAFETY SRM-3020 10 X7502350000 © 04/2018 ECHO Inc. Keep long hair away from engine and air intake. Retain hair with cap or net. Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are ...

Page 11 - • Take periodic breaks to minimize repetition and rest your hands.

SRM-3020 SAFETY X7502350000 11 © 04/2018 ECHO Inc. ENGLISH • If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. Repetitive Stress Injuries (RSI) It is believed th...

Page 12 - Read Manuals; tightly encircling the handles.; Keep a Solid Stance; • Maintain footing and balance at all times. Do not stand on slippery,; Avoid Hot Surfaces; • Keep exhaust area clear of flammable debris. Avoid; Equipment

SAFETY SRM-3020 12 X7502350000 © 04/2018 ECHO Inc. Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read Manuals • Provide all users of this equipment with literature for instructions on Safe O...

Page 13 - Checkwire terminals for secrure connections.

SRM-3020 SAFETY X7502350000 13 © 04/2018 ECHO Inc. ENGLISH ◆ Inspect shield for damage and ensure that shield is properly installed, and that that the cut-off knife is securely in place. Replace if either is damaged or missing. ◆ Check that the cutting attachment is firmly attached and in safe opera...

Page 14 - An Emission Control Label; is

EMISSION CONTROL SRM-3020 14 X7502350000 © 04/2018 ECHO Inc. Periodically Check fuel system (fuel lines, vent, grommet, fuel tank, and fuel cap) for leaks especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur....

Page 15 - DESCRIPTION; Power Head

SRM-3020 DESCRIPTION X7502350000 15 © 04/2018 ECHO Inc. ENGLISH DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. The safety deca...

Page 17 - CONTENTS; Support Handle Installation; Note: Label shows minimum; OPERATION; Power Head / Drive Shaft Assembly

SRM-3020 CONTENTS X7502350000 17 © 04/2018 ECHO Inc. ENGLISH CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECH...

Page 18 - Always be alert for changes in operation of unit.; Operation With Blades

OPERATION SRM-3020 18 X7502350000 © 04/2018 ECHO Inc. Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and bo...

Page 19 - • A new cotter pin is required each time a blade is installed.; Note: The barrier bar is used to restrict rearward movement of; Blade Selection; Blade

SRM-3020 OPERATION X7502350000 19 © 04/2018 ECHO Inc. ENGLISH *ANSI standards require brush cutters be equipped with a barrier bar or restrictive harness. U-Handle ensures a higher safety factor. Do Not install blades on GT (Curved Shaft) model trimmers. • Arbor diameter of upper blade plate must ma...

Page 20 - may; Tooth Weed/Grass Blade; 0 Tooth Brush Blade; is designed; 2 Tooth Clearing Blade

OPERATION SRM-3020 20 X7502350000 © 04/2018 ECHO Inc. 3-Tooth Grass/Weed Blades may be used where ever the nylon line head is used. DO NOT use this blade for heavy weeds or brush. 8 Tooth Weed/Grass Blade is designed for grass, garden debris and thick weeds up to 19 mm (0.75 in.) diameter. DO NOT us...

Page 21 - Use Shoulder/Waist Harness; Use; ALL; Fuel

SRM-3020 OPERATION X7502350000 21 © 04/2018 ECHO Inc. ENGLISH Use blade protectors to protect blade teeth during unit transportation. Use Shoulder/Waist Harness Use of the shoulder/waist harness is recommended for ALL Trimmer/ brushcutter use, not just blade operation. The shoulder/waist harness whe...

Page 22 - Fuel Requirements; Gasoline; Handling Fuel

OPERATION SRM-3020 22 X7502350000 © 04/2018 ECHO Inc. Fuel Requirements Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcoh...

Page 23 - DO NOT smoke near fuel.; Mixing Instructions

SRM-3020 OPERATION X7502350000 23 © 04/2018 ECHO Inc. ENGLISH ◆ Use an approved fuel container. Mark fuel containers as containing 2-stroke mixture fuel. ◆ DO NOT smoke near fuel. ◆ DO NOT allow flames or sparks near fuel. ◆ Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allow...

Page 24 - approved fuel storage container.; Storage; - Fuel storage laws vary by locality. Contact your local government; Starting Cold Engine

OPERATION SRM-3020 24 X7502350000 © 04/2018 ECHO Inc. Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. • Empty the fuel tank prior to storing the unit. Return unused fuel to an approved fuel stora...

Page 25 - Note: If engine does not star t with choke in “RUN” position after 5

SRM-3020 OPERATION X7502350000 25 © 04/2018 ECHO Inc. ENGLISH 1. Stop Switch Move stop switch button (A) forward, away from the STOP position. 2. Choke Move choke lever (B) to COLD START ( ) position. 3. Purge Bulb Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank ret...

Page 26 - Note: If attachment moves, readjust carburetor according to; Stop Switch

OPERATION SRM-3020 26 X7502350000 © 04/2018 ECHO Inc. After engine warm-up, grip throttle handle and support handle. Depress the throttle trigger lockout, and gradually depress throttle trigger to increase engine RPM to operating speed. Starting Warm Engine The starting procedure is the same as Cold...

Page 27 - Recoil Starter; Note: If engine does not start after 5 pulls, use Cold Start; Stopping Engine; Throttle; Applications; Trimming

SRM-3020 OPERATION X7502350000 27 © 04/2018 ECHO Inc. ENGLISH 3. Recoil Starter Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (D) until engine fire...

Page 28 - Scything; Operating Techniques; to assure debris flow is directed away from operator.; REACTION FORCES; Push or Pull - Kickback or Kickout

OPERATION SRM-3020 28 X7502350000 © 04/2018 ECHO Inc. Scything Scything - Swing the cutting head in a level arc, gradually feeding the line into the material being cut. Move forward with each arc to cut a swath. Width of cutting swath depends on arc. Use a larger arc for a wider swath, or a smaller ...

Page 29 - Kickout; Blade Cutting Problems

SRM-3020 OPERATION X7502350000 29 © 04/2018 ECHO Inc. ENGLISH As shown in the illustration, a blade turning counterclockwise will cause the equipment to pull away from the operator if the point of cutting resistance is on the left side of the blade. If the point of cutting resistance is on the right...

Page 30 - MAINTENANCE; Skill Levels; Level 1

MAINTENANCE SRM-3020 30 X7502350000 © 04/2018 ECHO Inc. Inspect the blade for damage before proceeding. Sharpen teeth if dull, or replace blade if cracked, bent, missing teeth, or otherwise damaged. To prevent binding: • Keep blades sharp • Avoid excessive pressure during cuts • Don’t exceed cutting...

Page 32 - Remove air filter cover. Brush dirt from inside cover.

MAINTENANCE SRM-3020 32 X7502350000 © 04/2018 ECHO Inc. (3) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. (*) Replacement is recommended based on the finding of damage or wear during inspection. Air Filter Level 1 1. Close choke (COLD START [ ] positio...

Page 33 - soaked, very dirty, or the rubber sealing edges are deformed.; Fuel Filter

SRM-3020 MAINTENANCE X7502350000 33 © 04/2018 ECHO Inc. ENGLISH • Lightly brush debris from filter. Replace filter if it is damaged, fuel soaked, very dirty, or the rubber sealing edges are deformed. 5. Assemble components in reverse order. Assure air filter is assembled with pleats oriented vertica...

Page 34 - Do not damage fuel line while removing fuel filter from tank.; Remove the filter from the line and install the new filter.; Spark Plug

MAINTENANCE SRM-3020 34 X7502350000 © 04/2018 ECHO Inc. Do not damage fuel line while removing fuel filter from tank. 3. Remove the filter from the line and install the new filter. Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the U...

Page 35 - • Air intakes are blocked,; DO NOT use a metal scraper to remove dirt from the cylinder fins.; Use brush to remove dirt from the cylinder fins.

SRM-3020 MAINTENANCE X7502350000 35 © 04/2018 ECHO Inc. ENGLISH To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine. Overheating and engine seizure can occur when: • Air intakes ar...

Page 36 - Spark Arrestor Screen; Remove spark plug lead.; Note: When cleaning carbon deposit, be careful not to damage the; Assemble components in reverse order.; Exhaust Port Cleaning; Spark Arrestor Screen, Gasket

MAINTENANCE SRM-3020 36 X7502350000 © 04/2018 ECHO Inc. 5. Remove grass and leaves from the grid (C) between the recoil starter and fuel tank. 6. Assemble components in reverse order. Exhaust System Spark Arrestor Screen Level 2. 1. Remove spark plug lead. 2. Remove muffler cover (A). 3. Place pisto...

Page 37 - Inspect heat shield, and replace if damaged.; Carburetor Adjustment

SRM-3020 MAINTENANCE X7502350000 37 © 04/2018 ECHO Inc. ENGLISH 1. Remove spark plug lead from spark plug, and remove muffler cover. 2. Place piston at top dead center. Remove muffler (A). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port (B). Never use a metal tool...

Page 38 - High Altitude Operation; Note: Every unit is run at the; Lubrication; Lithium Based Grease.

MAINTENANCE SRM-3020 38 X7502350000 © 04/2018 ECHO Inc. Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle...

Page 39 - Gear Housing; Install the gear housing and shield assembly.; Nylon Line Head Disassembly Instructions; head disassembly is not; Nylon Line Replacement; Wear gloves or personal injury may result:

SRM-3020 MAINTENANCE X7502350000 39 © 04/2018 ECHO Inc. ENGLISH Gear Housing 1. Clean all loose debris from gear case. 2. Remove plug (A) and check level of grease. 3. Add grease if necessary. DO NOT over-fill. Drive Shaft 1. Loosen screw (B) and remove locating screw (C). Pull gear case and shieldf...

Page 40 - Gearcase and surrounding area may be hot.

MAINTENANCE SRM-3020 40 X7502350000 © 04/2018 ECHO Inc. ◆ Gearcase and surrounding area may be hot. 1. Cut one piece of line to recommended length.2.0 mm (0.080 in.) diameter7.6 m (25 ft.). 2.4 mm (0.095 in.) diameter7.6 m (25 ft.). 2. Align arrows on top of knob with openings in eyelets. 3. Insert ...

Page 41 - head are worn; Sharpening Metal Blades

SRM-3020 MAINTENANCE X7502350000 41 © 04/2018 ECHO Inc. ENGLISH When the wear indicators located at the bottom of the Speed-Feed ® head are worn smooth, or if holes appear, replacement of the cover or the entire Speed-Feed ® head is required. Sharpening Metal Blades Several styles of metal blades ar...

Page 42 - TROUBLESHOOTING; Clean or replace

TROUBLESHOOTING SRM-3020 42 X7502350000 © 04/2018 ECHO Inc. If an electric grinder is used, use care not to overheat teeth, do not allow tips/tooth to glow red or turn blue. DO NOT place blade in cooling water. This will change the temper of the blade and could result in blade failure. 3. After shar...

Page 44 - STORAGE; Store unit in a dry, dust free place, out of the reach of children.

STORAGE SRM-3020 44 X7502350000 © 04/2018 ECHO Inc. STORAGE During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. L...

Page 45 - SPECIFICATIONS

SRM-3020 SPECIFICATIONS X7502350000 45 © 04/2018 ECHO Inc. ENGLISH SPECIFICATIONS MODEL SRM-3020 Length without cutter head 1,808 mm (71.2 in.) Width 306 mm (12 in.) Height 344 mm (13.5 in.) Weight (dry) without cutter head 5.5 kg (12.1 lb.) Engine Type Air cooled, two-stroke, single cylinder gasoli...

Page 47 - PRODUCT REGISTRATION; Thank you for choosing ECHO Power Equipment; FAST

SRM-3020 PRODUCT REGISTRATION X7502350000 47 © 04/2018 ECHO Inc. ENGLISH PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY ! NOTE: your information will never be s...

Page 49 - NOTES