ECHO SRM-225I - Manuals

SAFETY SRM-225I 6 X7732274902 © 11/2018 ECHO Inc. The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided. The safety alert symbol accompanied by the word “WARNING” calls attention to an act or...

SAFETY SRM-225I 8 X7732274902 © 11/2018 ECHO Inc. Personal Condition and Safety Equipment Cancer and Reproductive Harmwww.P65Warnings.ca.gov The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal inju...

SRM-225I SAFETY X7732274902 9 © 11/2018 ECHO Inc. Operate unit only if you are physically and mentally well. Eye Protection ◆ Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. ◆ For additional safety, a full-face shield may be worn over safety glasse...

SAFETY SRM-225I 10 X7732274902 © 11/2018 ECHO Inc. Keep long hair away from engine and air intake. Retain hair with cap or net. Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are ...

SRM-225I SAFETY X7732274902 11 © 11/2018 ECHO Inc. Repetitive Stress Injuries (RSI) It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities m...

SAFETY SRM-225I 12 X7732274902 © 11/2018 ECHO Inc. Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read Manuals • Provide all users of this equipment with literature for instructions on safe o...

SRM-225I SAFETY X7732274902 13 © 11/2018 ECHO Inc. ◆ Check unit for loose or missing nuts, bolts, and screws. Tighten or replace as needed. ◆ Inspect shield for damage and ensure that shield is properly installed, and that that the cut-off knife is securely in place. Replace if either is damaged or ...

SRM-225I EMISSION CONTROL X7732274902 15 © 11/2018 ECHO Inc. EMISSION CONTROL (EXHAUST & EVAPORATIVE) CARB And EPA Emissions Control Information The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Contro...

DESCRIPTION SRM-225I 16 X7732274902 © 11/2018 ECHO Inc. DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. Safety label is for exa...

SRM-225I CONTENTS X7732274902 17 © 11/2018 ECHO Inc. CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer...

ASSEMBLY SRM-225I 18 X7732274902 © 11/2018 ECHO Inc. ASSEMBLY Support Handle Installation Note: Label shows minimum spacing for support handle location. 1. If necessary, position support handle for comfortable operation and securely tighten screws. OPERATION Moving parts can amputate fingers or caus...

SRM-225I OPERATION X7732274902 19 © 11/2018 ECHO Inc. Operation With Blades Metal blades are very sharp and can cause severe injuries, even if engine is off and blades are not moving. Avoid contact with blades. Wear gloves to protect hands. Blade use demands specific brush cutter configuration. Oper...

OPERATION SRM-225I 20 X7732274902 © 11/2018 ECHO Inc. Note: The barrier bar is used to restrict rearward movement of the unit. The barrier bar is not a handle and should not be gripped when using or carrying the unit. Blade Selection The type of blade used MUST be matched to the type and size of mat...

SRM-225I OPERATION X7732274902 21 © 11/2018 ECHO Inc. A trimmer-brushcutter with a metal blade can cause serious injuries if handled improperly. Always use extreme care when carrying or handling the equipment to avoid contact with the cutting edges of the blade. Use the optional blade cover (A) when...

OPERATION SRM-225I 22 X7732274902 © 11/2018 ECHO Inc. Fuel Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E -85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of diesel or alternative fuels may cause performan...

SRM-225I OPERATION X7732274902 23 © 11/2018 ECHO Inc. ◆ AVOID repeated or prolonged skin contact ◆ AVOID inhaling oil mists or vapors. ECHO branded 2-stroke oils may be mixed at 50:1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals. Handling F...

OPERATION SRM-225I 24 X7732274902 © 11/2018 ECHO Inc. Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, close fue...

SRM-225I OPERATION X7732274902 25 © 11/2018 ECHO Inc. Starting Cold Engine The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that coul...

OPERATION SRM-225I 26 X7732274902 © 11/2018 ECHO Inc. 4. Recoil Starter Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grasp throttle handle with left hand and fully depress throttle trigger to wide open position. Gently pull recoil starter handle/rope (...

SRM-225I OPERATION X7732274902 27 © 11/2018 ECHO Inc. 1. Stop Switch Move stop switch (A) away from the STOP position. 2. Purge Bulb Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. Note: Energy is stored in the star...

OPERATION SRM-225I 28 X7732274902 © 11/2018 ECHO Inc. 1. Throttle Release throttle and allow engine to return to idle before shutting off engine. 2. Stop Switch Move stop switch (A) to STOP position. Applications Nylon line heads may be used for trimming, scything, edging, and scalping of grass and ...

SRM-225I OPERATION X7732274902 29 © 11/2018 ECHO Inc. Reaction Forces Push or Pull - Kickback or Kickout During normal use, operating a brushcutter with a circular metal blade can produce sudden strong reaction forces that are difficult to control. Strong reaction forces can cause a loss of balance ...

SRM-225I MAINTENANCE X7732274902 31 © 11/2018 ECHO Inc. MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before...

MAINTENANCE SRM-225I 34 X7732274902 © 11/2018 ECHO Inc. Do not damage fuel line while removing fuel filter from tank. 3. Remove the filter from the line and install the new filter. Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the U...

SRM-225I MAINTENANCE X7732274902 35 © 11/2018 ECHO Inc. Overheating and engine seizure can occur when: • Air intakes are blocked, preventing cooling air from reaching the cylinder. • Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the heat from...

MAINTENANCE SRM-225I 36 X7732274902 © 11/2018 ECHO Inc. 6. Remove grass and leaves from the grid between the recoil starter and fuel tank. 7. Assemble components in reverse order. Exhaust System Spark Arrestor Screen Level 2. 1. Remove spark plug lead and engine cover. 2. Place piston at Top Dead Ce...

SRM-225I MAINTENANCE X7732274902 37 © 11/2018 ECHO Inc. 1. Remove spark plug lead from spark plug, and remove engine cover. 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port (C). Never use a...

MAINTENANCE SRM-225I 38 X7732274902 © 11/2018 ECHO Inc. Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle...

SRM-225I MAINTENANCE X7732274902 39 © 11/2018 ECHO Inc. Lubrication Level 1. Parts Required: Lithium Based Grease. Gear Housing 1. Clean all loose debris from gear case. 2. Remove plug (A) and check level of grease. 3. Add grease if necessary. DO NOT over-fill. Drive Shaft 1. Loosen screw (B) and re...

MAINTENANCE SRM-225I 40 X7732274902 © 11/2018 ECHO Inc. 1. Press top of locking tabs (A) on both sides of Speed Feed ® head to release cover (B) from eyelet carrier (C). 2. Remove cover from eyelet carrier. Nylon Line Replacement Wear gloves or personal injury may result: ◆ Cutoff knife is sharp. ◆ ...

SRM-225I TROUBLESHOOTING X7732274902 43 © 11/2018 ECHO Inc. TROUBLESHOOTING Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may result. ENGINE PROBLEM TROUBLESHOO...

SRM-225I STORAGE X7732274902 45 © 11/2018 ECHO Inc. STORAGE During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. L...

SPECIFICATIONS SRM-225I 46 X7732274902 © 11/2018 ECHO Inc. SPECIFICATIONS MODEL SRM-225 Length without cutter head 1797 mm (70.7 in.) Width 256 mm (10.1 in.) Height 329 mm (13.0 in.) Weight (dry) without cutter head 4.9 kg (10.8 lb.) Engine Type Air cooled, two-stroke, single cylinder gasoline engin...

PRODUCT REGISTRATION SRM-225I 48 X7732274902 © 11/2018 ECHO Inc. PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY ! NOTE: your information will never be sold or m...

NOTES SRM-225I 50 X7732274902 © 11/2018 ECHO Inc. NOTES

ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com U01514001001 - U01514999999U01614001001 - U01614999999

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 7 2 4 5 6 7 8 9 10 3 Shaft Decal P/N X505001930 P/N X505002310 Hot Decal (near muffler) d escrIptIon Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them. If a dec...

8 1. POWER hEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter. 2. GRIP - Rear (right hand) handle. 3 ThROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. 4...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 9 c ontents The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions, installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary. After open...

10 nylon lIne head InstallatIon Tools Required: Head Locking Tool. Parts Required: Nylon Line Head. CAUTION Wear Gloves or personal injury may result: • Cutoff knife is sharp. • Gearcase and surrounding area may be hot. 1. Be sure adapter plate (C) remains on PTO shaft (A). 2. Align locking hole in ...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 11 front handle InstallatIon Tools Required: Torx T27 L-Wrench NOTE Label shows minimum spacing for front handle location. 1. Position front handle for comfortable operation and secure screws. MIN SPACING WARNING Moving parts can amputate fingers...

12 Grass/Weed Blades Require: Install Blade Conversion Kit, Includes metal shield (A), barrier bar (B), and shoulder harness (C). B A C NOTE The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE and should not be gripped when using or carrying the unit. B...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 13 Choosing the Correct Blade WARNING The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick out and ...

14 NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual. WARNING Alternative fuels, such as E-15 (15% et...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 15 Handling Fuel DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result. • Use an approved fuel container. • DO NOT smoke near fuel. • DO NOT allow flames or sparks near fuel. • Fuel...

16 startIng cold engIne WARNING The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. WARNING Never attempt to di...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 17 A A C D startIng warm engIne The starting procedure is the same as Cold Start except DO NOT close the choke, and do not hold throttle trigger fully depressed. WARNING The attachment should not move at idle, otherwise serious per- sonal injury ...

18 Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help yo...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 19 aIr fIlter Level 1. Tools required: 25 - 50 mm (1 - 2 in.) Cleaning Brush Parts required: REPOWER TM AIR & FUEL FILTER KIT. 1. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filte...

20 spark plug Level 2. Tools required: T-Wrench, feeler gauge, soft metal brush Parts Required: REPOWER TM Tune-Up Kit IMPORTANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) other- wise severe engine damage may occur. 1. Remove spark plug and check for fouling, worn and rounded center electrod...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 21 1. Remove spark plug lead. 2. Remove air cleaner cover (A). 3. Remove 2 engine cover screws and engine cover (B). (1 machine screw - handle side) (1 tapping screw - starter side) IMPORTANT DO NOT use a metal scraper to remove dirt from the cyl...

22 Exhaust Port Cleaning Level 2. Tools required: Torx T27 L-Wrench, Wood or plastic scraper Parts Required: As needed: Heat Shield 1. Remove spark plug lead from spark plug, and remove muffler cover (2 screws). 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a woo...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 23 carburetor adjustment Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissi...

24 A A lubrIcatIon Level 1. Tools Required: 13mm Open End Wrench, T27 Torx L-Wrench, Clean Rag, Grease Gun Parts Required: POWER BLENDX TM 8 oz. (P/N 91014) or Lithium Base Grease. Gear Housing 1. Clean all loose debris from gear box. 2. Remove plug (A) and check level of grease. 3. Add grease if ne...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 27 sharpenIng metal blades Three styles of metal blades are approved for use on the ECHO Brush Cutter. The 8-tooth blade can be sharpened during normal mainte- nance. The clearing blade and 80 tooth blade require professional service. Before shar...

28 t roubleshootIng DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground- ing spark plug near cylinder plug hole, otherwise serious personal injury may result. T R A H C G N I T O O H S E L B U O R T M E L B O R P E N I G N E m e l b...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 29 Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: 1. Store unit in a dry, dust free place, out of the reach of children. DANGER Do not stor...

30 s pecIfIcatIons MODEL ---------------------------------------------------- SRM-225 Length w/o cutter head ------------------------------------ 1793mm (70.6 in.)Width -------------------------------------------------------- 251 mm (9.88 in.)Height --------------------------------------------------...

G rass T rimmer /B rush C uTTer O peraTOr ' s m anual 31 ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and ...

S54911001001/S54911 002204 S08712001001/S08712 010857 ECHO, INCORPORATED 400 o akwood r oad l ake Z urIch , Il 60047 www.echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 MON - FRI C.S.T. DEALER? Call 1-800-432-ECHO 1-800-432-3246 or www.echo-usa.com s ervIcIng I nformatIon parts / se...