Page 2 - Specifications; Specifications, descriptions and illustrative material in
2 Maintenance .................................................................11 - Skill Levels ...........................................................11 - Maintenance Intervals ...........................................11 - Lubrication ............................................................
Page 3 - WARNING; CIRCLE AND SLASh SyMBOL; This symbol means the specific action; CAUTION
T rimmer A TTAchmenT O perATOr ' s m AnuAl 3 s afeTy manual safeTy symbols and ImporTanT InformaTIon Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre - ceded by symbols or key words. The following is an explanation of those symbols...
Page 4 - personal
4 Physical Condition Your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Wear eye protection that meets ANSI Z87.1 or CE re- q...
Page 5 - DANGER
T rimmer A TTAchmenT O perATOr ' s m AnuAl 5 DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety...
Page 6 - equIpmenT; combined with a non approved ECHO product.; NOTE; been tested and approved by ECHO.; esCrIpTIon; tions for specific information.; Shaft Decal
6 equIpmenT WARNING Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product. • Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. • Inspect shield for damage and ensur...
Page 7 - DRIVE ShAFT ASSEMBLy -; Contains a specially designed liner and the flexible drive shaft.; NyLON CUTTING ATTAChMENT; onTenTs; parts. Use the contents list to check for missing parts.
T rimmer A TTAchmenT O perATOr ' s m AnuAl 7 1. DRIVE ShAFT ASSEMBLy - Contains a specially designed liner and the flexible drive shaft. 2. NyLON CUTTING ATTAChMENT - Contains replaceable nylon trimming line that advances when the trimmer head is tapped against the ground while the head is turning a...
Page 8 - Carefully fit attachment drive shaft assembly into coupler (B) to; shaft. Locator pin should snap flush in coupler. Full engagement
8 a ssembly power head shafT / lower shafT assembly A B D E C D C A Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling. 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock- out position. 3. Remove vinyl cap from a...
Page 9 - • Cutoff knife is sharp.
T rimmer A TTAchmenT O perATOr ' s m AnuAl 9 To advanCe TrImmer lIne See Maintenance Section for nylon line replacement. NOTE To advance trimmer line, tap trimmer head against the ground while the head is turning at normal operating speed. remove nylon lIne head Caution Wear Gloves or personal injur...
Page 10 - personal injury may result.; peraTIon; gloves to protect hands from sharp edges and hot surfaces.
10 WARNING The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. NOTE Refer to your Pro Attachment Series Operato...
Page 11 - Level; = Moderate difficulty. Some specialized tools may be required.; Component; IMPORTANT; Gear Housing
T rimmer A TTAchmenT O perATOr ' s m AnuAl 11 Your ECHO unit is designed to provide many hours of trouble-free service. Regular scheduled maintenance will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Servi...
Page 12 - Pull flexible cable from the drive shaft housing, wipe clean and; nylon
12 Drive Shaft (Lower) IMPORTANT Lower and upper drive shaft must be lubricated with high tem- perature automotive grease every 25 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Loosen two (2) screws (B) and remove center locating screw (C). Pull gear box a...
Page 13 - 75 LH Nylon line head; Torage; Storage Hook Installation; Insert small end of hook into locating hole on attachment shaft.; peCIfICaTIons; Wear Indicators; When the wear indic
T rimmer A TTAchmenT O perATOr ' s m AnuAl 13 MODEL ---------------------------------------------------- PAS Trimmer Attachment Shaft Length ------------------------------------------------ 870 mm (34.3 in.) Attachment Width ----------------------------------------- 178 mm (7.0 in.) Attachment Heigh...
Page 14 - noTes
Page 16 - Genuine ECHO Parts and ECHO REPOWERTM Parts and Assemblies; always; ber, Type and Serial Number of the unit with you. You can find these; Replacement Operator, Safety Manuals, and Parts Catalogs
ECHO, INCORPORATED 400 o akwood r oad l ake Z urICh , Il 60047-1564 www . eCho - usa . Com DEALER? Call 1-800-432-ECHO or www.echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T. S06400001001/S06400999999 s ervICIng I nformaTIon parTs / serIal number Genuine ECHO Parts a...