ECHO 99944200465 - Manuals

ECHO 99944200465 – Manual in PDF format online.

Manuals:

Manual

Manual ECHO 99944200465

Summary

Page 2 - TABLE OF CONTENTS

2 X7702096504 © 3/2015 ECHO Inc. TABLE OF CONTENTS 99944200465 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2Introduction ...............................................................

Page 3 - always

99944200465 INTRODUCTION © 3/2015 ECHO Inc. X7702096504 3 INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of help...

Page 4 - Replacement Operator, Safety Manuals, and Parts Catalogs; SAFETY; Manual Safety Symbols and Important Information

4 X7702096504 © 3/2015 ECHO Inc. SAFETY 99944200465 Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check t...

Page 5 - Physical Condition; Your judgment and physical dexterity may not be good:; Eye Protection

99944200465 SAFETY © 3/2015 ECHO Inc. X7702096504 5 International Symbols Personal Condition and Safety Equipment Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when op...

Page 6 - Hand Protection; To reduce the risk of serious or fatal injury, persons with; Extended Operation / Extreme Conditions

6 X7702096504 © 3/2015 ECHO Inc. SAFETY 99944200465 Hand Protection Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles. Gloves also provide protection against cuts and scratches, cold environments, and reduce the transmission of machine vibration to your hands. Hearing/Ear ...

Page 8 - Read the Manuals; work in odd positions or on ladders. Do not over reach.; Avoid Hot Surfaces; • During operation, the drive shaft housing and attachment; Equipment; which have not been tested and approved by ECHO.

8 X7702096504 © 3/2015 ECHO Inc. SAFETY 99944200465 Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety...

Page 9 - DESCRIPTION; BLADE; produced during the edging operation.; DRIVE SHAFT ASSEMBLY; - Contains a specially designed liner and the flexible drive shaft.; WHEEL; Shaft Decals

99944200465 DESCRIPTION © 3/2015 ECHO Inc. X7702096504 9 DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING ins...

Page 10 - CONTENTS

10 X7702096504 © 3/2015 ECHO Inc. CONTENTS 99944200465 CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Deal...

Page 11 - ASSEMBLY; Power Head Shaft/Lower Shaft Assembly; Remove vinyl cap from attachment drive shaft.

99944200465 ASSEMBLY © 3/2015 ECHO Inc. X7702096504 11 ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-o...

Page 12 - Remove bed redefining blade as shown in “Blade

12 X7702096504 © 3/2015 ECHO Inc. ASSEMBLY 99944200465 Edger Blade Installation 1. Remove bed redefining blade as shown in “Blade Replacement” Section. Discard used split pin. 2. Do not remove inner blade adapter (A) or locking tool (B). 3. Install and center edger blade (C) on inner adapter. 4. Ins...

Page 13 - OPERATION; Operation Techniques

99944200465 OPERATION © 3/2015 ECHO Inc. X7702096504 13 OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before re...

Page 15 - Loosen blade adjustment knob and adjust the blade’s depth

99944200465 OPERATION © 3/2015 ECHO Inc. X7702096504 15 3. Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass. Never adjust blade height or clear debris from shield with engine running, otherwise serious personal injury may result. Note: Blade...

Page 16 - MAINTENANCE; Skill Levels; Level 1; = Moderate difficulty. Some specialized tools may be required.; REPOWER; Maintenance Kits and Parts to make your maintenance job easier.; Maintenance Intervals; IMPORTANT; Drive Shaft Lubrication; Maintenance Procedure; Lithium Based Grease.

16 X7702096504 © 3/2015 ECHO Inc. MAINTENANCE 99944200465 MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop befo...

Page 18 - fill gear case to bottom of grease plug hole.

18 X7702096504 © 3/2015 ECHO Inc. MAINTENANCE 99944200465 6. Remove plug (G) and check level of grease. Grease should fill gear case to bottom of grease plug hole. 7. Add grease if necessary using squeeze-type tube. Do not use high pressure grease gun. DO NOT over-fill. 8. Install inner blade adapte...

Page 19 - STORAGE; Storage Hook Installation; Insert small end of hook into locating hole on attachment

99944200465 STORAGE © 3/2015 ECHO Inc. X7702096504 19 STORAGE Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft.

Page 20 - SPECIFICATIONS

20 X7702096504 © 3/2015 ECHO Inc. SPECIFICATIONS 99944200465 SPECIFICATIONS MODEL 99944200465 Shaft Length 884.2 mm (34.81 in.) Attachment Width 198.9 mm (7.83 in.) Attachment Height 349.3 mm (13.75 in.) Weight w/blade 3.86 kg (8.52 lb.) Drive Shaft Type 6.35 mm (1/4 in.) Flex Shaft Rotation Directi...

Page 21 - WARRANTY STATEMENTS

99944200465 WARRANTY STATEMENTS © 3/2015 ECHO Inc. X7702096504 21 WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free ...

Page 23 - PRODUCT REGISTRATION; Thank you for choosing ECHO Power Equipment

99944200465 PRODUCT REGISTRATION © 3/2015 ECHO Inc. X7702096504 23 PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY ! NOTE: your information will never be sold or...

Page 24 - NOTES

ECHO Manuals

ECHO CS-330EVLP User Manual
ECHO CS-330EVL User Manual
ECHO PB-265L User Manual
ECHO PB-265L Manual
ECHO SB Manual
ECHO PPT-265H Manual
ECHO PPT-230 Manual
ECHO 225SB Manual
ECHO CS-440 Manual
ECHO 2400 Manual
ECHO SRM-2100SB Manual
ECHO EN55022 Manual
ECHO 261 Manual
ECHO 231 Manual
ECHO RM-210SB Manual
ECHO PPF-2100 TYPE 1/1E Manual
ECHO SHC-265 Manual
ECHO 99944200590 , SRM-2100SB/2400SB SRM-210SB/211SB SRM-260SB/261SB PAS-2100/2400 PAS-210/211 PAS-230/231, PAS-260/261, PAS-2601 Manual
ECHO 230 Manual
ECHO 225VPB Manual