Page 2 - TABLE OF CONTENTS
2 X7702092204 © 10/2013 ECHO Inc. TABLE OF CONTENTS 99944200532 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2Introduction ..............................................................
Page 3 - always
99944200532 INTRODUCTION X7702092204 3 © 10/2013 ECHO Inc. INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of hel...
Page 4 - Replacement Operator, Safety Manuals, and Parts Catalogs; SAFETY; Manual Safety Symbols and Important Information
4 X7702092204 © 10/2013 ECHO Inc. SAFETY 99944200532 Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check ...
Page 5 - Physical Condition
99944200532 SAFETY X7702092204 5 © 10/2013 ECHO Inc. International Symbols Personal Condition and Safety Equipment Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when o...
Page 6 - Hearing Protection
6 X7702092204 © 10/2013 ECHO Inc. SAFETY 99944200532 Hearing Protection ECHO recommends wearing hearing protection whenever unit is used. Proper Clothing Wear snug fitting, durable clothing; • Pants should have long legs, shirts with long sleeves. • DO NOT WEAR SHORTS, • DO NOT WEAR TIES, SCARVES, J...
Page 7 - Repetitive Stress Injuries; • Take periodic breaks to minimize repetition and rest your hands.; Guide Bar and Saw Chain; • Only use ECHO approved guide bar and saw chain.
99944200532 SAFETY X7702092204 7 © 10/2013 ECHO Inc. Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may p...
Page 8 - Read the Manuals; Keep a Solid Stance
8 X7702092204 © 10/2013 ECHO Inc. SAFETY 99944200532 • Do not hit rocks, stones, tree stumps and other foreign objects with the saw chain. • Do not cut into the ground with the saw chain. • If saw chain strikes an obstruction, stop engine immediately and inspect saw chain for damage. • Do not operat...
Page 9 - Avoid Hot Surfaces; • During operation, the drive shaft housing and attachment; Kickback; which could result in serious personal injury.; Equipment; attachment combined with a non approved ECHO product.
99944200532 SAFETY X7702092204 9 © 10/2013 ECHO Inc. Avoid Hot Surfaces • During operation, the drive shaft housing and attachment bearing housing may become very hot, too hot to touch. Avoid contact during and immediately after operation. Kickback Kickback can lead to dangerous loss of control of t...
Page 10 - DESCRIPTION; - Contain important safety information that must be followed.
10 X7702092204 © 10/2013 ECHO Inc. DESCRIPTION 99944200532 DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING i...
Page 11 - CONTENTS
99944200532 CONTENTS X7702092204 11 © 10/2013 ECHO Inc. CONTENTS Due to packaging restriction the ECHO product you have purchased requires some assembly. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to ...
Page 12 - ASSEMBLY; Power Head Shaft/Lower Shaft Assembly; Remove vinyl cap from attachment drive shaft.; Front Loop Handle Removal
12 X7702092204 © 10/2013 ECHO Inc. ASSEMBLY 99944200532 ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-...
Page 13 - To Adjust Saw Chain Tension
99944200532 ASSEMBLY X7702092204 13 © 10/2013 ECHO Inc. 1. Remove front handle assembly, barrier bar (if installed), and mounting hardware from PAS or SRM-SB power head. 2. Retain parts for future use. Saw Chain Adjustment Always disconnect spark plug wire before servicing cutting attachment. Wear g...
Page 14 - OPERATION; Lubricating the Guide Bar and Saw Chain; Automatic Oiling System; Remove oil fill cap and fill reservoir with a quality, low; Adjusting Automatic Oiler; Note: The automatic oiler is preset to deliver a sufficient oil
14 X7702092204 © 10/2013 ECHO Inc. OPERATION 99944200532 OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before r...
Page 16 - MAINTENANCE; Skill Levels; Level 1; = Moderate difficulty. Some specialized tools may be required.; REPOWER; Maintenance Kits and Parts to make your maintenance job easier.; Maintenance Intervals; IMPORTANT; Lubrication; Drive Shaft; TEM
16 X7702092204 © 10/2013 ECHO Inc. MAINTENANCE 99944200532 MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop bef...
Page 17 - Guide Bar Replacement / Installation
99944200532 MAINTENANCE X7702092204 17 © 10/2013 ECHO Inc. 1. Remove cutting attachment locator screw (A). 2. Loosen two (2) bolts (B). 3. Remove cutting attachment assembly. 4. Remove flex cable, wipe clean and apply a thin coating (15 ml) of lithium based grease. 5. Slide the flexible cable back i...
Page 19 - Gently brush debris from inside guide bar cover and from; Filing Standard Saw Chain; Level 2
99944200532 MAINTENANCE X7702092204 19 © 10/2013 ECHO Inc. 2. Remove guide bar cover (D). 3. Gently brush debris from inside guide bar cover and from around sprocket. 4. Install guide bar cover (D), install and tighten guide bar nuts, and install guide bar cover screw (B).Tighten both guide bar nuts...
Page 21 - STORAGE; Storage Hook Installation; Insert small end of hook into locating hole on attachment
99944200532 STORAGE X7702092204 21 © 10/2013 ECHO Inc. STORAGE Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft.
Page 22 - SPECIFICATIONS; MODEL
22 X7702092204 © 10/2013 ECHO Inc. SPECIFICATIONS 99944200532 SPECIFICATIONS MODEL 99944200532 Length 1448 mm (57.0 in.) Width 102 mm (4.0 in.) Height 146 mm (5.75 in.) Weight 2.25 kg (4.97 lbs.) Sprocket Type 6 tooth spur, 9.53 mm (3/8 in.) pitch Drive Shaft 1/4 in. Flex Cable Gear Reduction Ratio ...
Page 23 - WARRANTY STATEMENTS
99944200532 WARRANTY STATEMENTS X7702092204 23 © 10/2013 ECHO Inc. WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free...
Page 25 - NOTES
99944200532 NOTES X7702092204 25 © 10/2013 ECHO Inc. NOTES