Earthquake Sound P8 - Manuals

Page 2 - Safety Instructions

Safety Instructions 13. Damage Requiring Service — The Component 1. Read Instructions — All the safety and operation should be served only by EQ qualified serviced instructions should be read before the Earthquake personnel when: Component is operated. a. The power-supply cord or the plug has been 2...

Page 3 - Contents

WARNING: The MiniMe subwoofers are capable of generating high sound pressure levels. You should exercise caution when operating these speakers. Long term exposures to high levels of sound pressure will cause permanent damage to your hearing. Sound pressure levels exceeding 85dB can be dangerous with...

Page 4 - Introduction

Earthquake • MiniMe User Manual 4 Introduction Please take a moment to fill out and mail the Earthquake Warranty Registration card. Also read the serial number located on the control panel and record it here: Unpacking Your Earthquake subwoofer should reach you in perfect condition. If you do notice...

Page 5 - Control Panel Overview

Earthquake • MiniMe User Manual 5 Control Panel Overview (4) Power Status LED (5) Line Level RCA Inputs (6) Sub Operation Switch (7) Auto ON/OFF (8) Speaker Level Inputs (9) Speaker Level Outputs (10) Manual ON/OFF Switch (11) 110-120V AC Power Connection Line Fuse ( ) 3 0-180° Phase Shift ( ) Frequ...

Page 6 - Connection

Earthquake • MiniMe User Manual 6 (7) Auto ON/OFF (11) 110-120V AC Power When the main “POWER” ON/OFF switch is in the Connection “OFF” position, this switch has no affect on the The Earthquake MiniMe is equipped with a built in subwoofer. When the main “POWER ON/OFF” switch standard, two-prong powe...

Page 9 - Location

Earthquake • MiniMe User Manual 9 MiniMe 1 P= Passive Radiator A= Active Driver MiniMe 2 P A MiniMe 3 P A Location F a c t : S u b w o o f e r s r e p r o d u c e f r e q u e n c i e s w i t h and will still pressurize the room with lots of bass. wavelengths that are long in relation to the dimensio...

Page 10 - System Configurations

Earthquake • MiniMe User Manual 10 PRE-AMPLIFIER SUB/LFE OUT L R MAIN OUTPUTS + - AMPLIFIER INPUTS L R TO FRONT SPEAKERS + - System Configurations The following pages show some typical connections that you might make in your installation. They show how the inputs and outputs of the Earthquake sub ar...

Page 13 - Adjusting the controls; Control settings

Earthquake • MiniMe User Manual 13 Adjusting the controls There are two main methods for adjusting the level, crossover frequency and phase of the Earthquake MiniMe to match a system. ? Method One: Typical: Listening and making adjustments to suit your taste. ? Method Two: Laboratory: By measuring t...

Page 14 - Specification

Earthquake • MiniMe User Manual 14 Specification Amplifier Output 320 Watts (4.6-Ohm impedance) High Cut Filter 35Hz 100Hz adjustable. The crossover can be bypassed by rotating the crossover frequency control fully clockwise. Frequency Response 28Hz 175Hz Power Line Voltage 110-120C~AC / 60Hz / 180 ...

Page 15 - Limited 5-Year Warranty

Earthquake • MiniMe User Manual 15 Limited 5-Year Warranty Earthquake warrants the original purchaser that all Factory Sealed New Audio Products to be free from defects in material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on the o...