Dyson Contrarotator- Manuals

Always: • use the Rollerjack TM to move the machine. Care should be taken when moving it, as it is very heavy. • turn off the machine with the ‘Mains on/off ’ button and switch off at the socket when not in use. • turn off the water supply to the machine and close both the inner and outer doors when...

Inner transit packaging removal Before installation 8 Remove the four screws securing the bracket to the machine casing and lift out the transit bracket. • Refit the lid and two screws. To replace the packaging (eg: for moving house), reverse the procedure described above. Please retain the transit ...

600 mm MAX. 450 mm MIN. 848mm 595mm Dimensions: Height 848mm, depth 575mm, width 595mm Weight: 103kg. Voltage: 220-240V, 50Hz. Please refer to rating plate (see section 1 01 for location). Power: 2750W (230V). Please refer to rating plate (see section 1 01 for location). Water pressure: 0.4-5 bar. C...

When all the instructions on the previous pages have been completed, the machine can be installed into its operating position using the Rollerjack TM handle (see section 4 01). • Using the Dyson spanner, adjust the two front feet so that the machine is perfectly stable and will not rock on three of ...

Operation 6 01 • Plug the machine into the mains and switch on at the socket. • Turn on the water supply at the mains. • Open the outer and inner doors. • Check the drums are empty before placing the sorted laundry into the washing machine. • Close both doors, making sure that both have ‘clicked’ sh...

1 2 Switch on the machine Select the programme Select Cotton/Synthetics/Wool/Delicate/Handwash items or Duvet.Temperature, spin and soil typesettings will automatically adjust tothe default settings to give the bestoptions for the selected wash.Please see section 8 01 for details of how to change th...

8 01 Optional settings To personalise the default wash programmes Adjust your programme After selecting the fabric type, press the temperature, spin and soil type buttons to scroll through the options and select your preferred settings. Note: on certain programmes some options are not available (see...

Start delay only available on CRO1 Memory This allows you to programme the wash to finish when you want it to. Use the < and > arrows to adjust the settings (eg: if you want the wash to start in 10 hours time, press the > arrow 10 times) and press ‘Start’ to activate it. The display will co...

Fabric care and advice 9 01 Wash tips Always: Care label • check the wash care label on laundry to select the most appropriate programme. If you are unsure of the care label, use a gentle programme such as Wool. Mixed fabric load • wash a mixed load according to the most delicate item in it. • sort ...

9 02 Programme table Care label Suggested programme Temperature Spin speed Soil type Options Maximum load Cotton Sturdy cottons Linen Synthetics Cotton mixes Mixed fibre Polycottons Fabrics with special finishes (eg: ‘non-iron’ treated cotton) Mixed fabric wash loads Printed cottons Polyester Delica...

Cleaning Maintenance • The soap tray cavity in the machine should be cleaned out with a small, soft brush, taking care not to dislodge the rubber seal. • Replace the soap tray ensuring it ‘clicks’ into place. Do not: • wash the soap tray in a dishwasher. Maintenance wash To prevent odours and build-...

Coin trap Maintenance 5 Remove any objects from the coin trap. 6 If any more items seem to be blocking the coin trap, pull out the flow accelerator. • Remove any items and firmly push the flow accelerator back into place. To replace the coin trap cover: • Ensuring the seal is in place, lubricate wit...

11 01 Troubleshooting LCD display is blank Machine displays “Overload reduced performance” Machine displays “Close inner door then press start” Certain spin speeds, temperatures, dirt levels cannot be selected Cancel button does not work during a wash Cannot open door Machine leaks water Machine sha...

Ensure the machine is plugged in andswitched on. Check the fuse and alsothat the circuit breaker has not tripped. See section 9 02 for the programme options wash table. Wait for the machine to finish the cyclebefore opening the door. To cancel thewash hold down the ‘Cancel’ button. Press ‘Start’ to ...

11 03 Troubleshooting Child lock on Overload reduced performance Uneven load could not spin Close outer door then press start Close inner door then press start Not emptying: check hose andcoin trap Not filling: check water supply Fault The child lock has not been deactivated. The recommended wash lo...