Dyson omnidirectional soft roller cleaner head Four 360° stabilizing casters allow the cleaner head to glide in all directions, making it easy to navigate around obstacles and clean in tight spaces. Vacuum cleaner Wand Charger Charges your vacuum with or without a dock. Combination tool Two tools in...
Page 3 - Getting started
Power button Easy power selection buttons for simple control and added maneuverability. Press the button to change power modes. Eco mode The optimum balance of power and run time. Max mode Delivers maximum power. For intensive cleaning of ground-in dirt. Dyson omnidirectional soft roller cleaner hea...
Page 4 - Charging your machine; Changing your click-in battery
For the best experience, we recommend fully charging your machine as soon as you open the box and after every clean. Charging your machine The LED light on the end of the handle will flash when the power is running low and to charge your battery. Charge your machine by either connecting the charger ...
Page 6 - Washing your filter
3 4 clik 2 1 3 4 clik 2 1 1 2 3 2 1 3 4 Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Turn your filter counter- clockwise and pull it away from your machine. Before washing your filter, tap it gently over a bin to remove any excess dust and debris....
Page 7 - Washing your brush bars
clik clik clik clik clik clik Make sure your brush bars are completely dry before refitting. Each brush bar is engineered to correspond to a specific position on the end cap. It is important that both brush bars are fitted in the correct position. Slide the assembled brush bars back into the cleaner...
Page 8 - Washing your non-powered tool
Washing your non-powered tool Combination tool Wipe your non-powered tool with a damp cloth only.
Page 9 - Clearing blockages
1 2 If your machine detects a blockage, the motor will pulse six times, You won’t be able to use your machine until the blockage has been cleared. If you try to use your machine when the motor is pulsing, it will automatically cut out. Leave your machine to cool down before looking for blockages and...